NEC M40 User Manual
NEC M40 - MULTEOS - 40" LCD TV Manual
 |
UPC - 805736018424
View all NEC M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC M40 manual content summary:
- NEC M40 | User Manual - Page 1
User's Manual M40/M46 - NEC M40 | User Manual - Page 2
22 Picture Mode ...English-22 Information OSM ...English-22 OSM (On-Screen-Manager) Controls ...English-23 PICTURE ...English-24 ADJUST ...English-24 the LCD monitor via RS-232C Remote Control English-32 Features ...English-34 Troubleshooting ...English-35 Specifications - M40 ...English - NEC M40 | User Manual - Page 3
to Identify and Resolve Radio-TV Interference Problems." This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4. The product you purchased may not have this feature. M40-AV, M40-AVT, M46-AV, M46-AVT only HDMI, the HDMI logo and High - NEC M40 | User Manual - Page 4
VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: problems. Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MULTEOS M40 (L406T3)/MULTEOS any agreements made between yourself and NEC. The mark on electrical and - NEC M40 | User Manual - Page 5
service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabinet slots, as they may touch monitor. If a power cord is not supplied with this monitor, please contact your supplier. • When operating the MULTEOS monitor - NEC M40 | User Manual - Page 6
Contents Your new MULTEOS M40/MULTEOS M46 monitor box* should contain the following: • LCD monitor • Clamp x 3 • Power Cord • Screw (M4 x 8) x 5 • Video Signal Cable • CD-ROM • User's Manual • Main switch cover • Wireless Remote Control and AA Batteries Video Signal Cable (D-SUB to D-SUB - NEC M40 | User Manual - Page 7
the wireless remote control). See also page 8. Glows green when the LCD monitor is in active. Glows red when the LCD is in POWER OFF (ECO standby) mode. Glows Amber when the LCD is in POWER OFF (standby). Amber blinks when the monitor is in Power Save Mode. Green and Amber blink alternately while in - NEC M40 | User Manual - Page 8
, amplifier, etc.). 10 VIDEO INPUT/OUTPUT Connector* * This connector does not support analog input. 3 VGA IN (mini D-Sub 15 pin) To input analog RGB functions. Out connector: Connect RS-232C output. To connect to multiple Multeos monitors via daisy RS-232C Chain. To outputs the signal from the RGB/ - NEC M40 | User Manual - Page 9
up or down to select the adjustment with OSM menu. Small screen which adjusted "PIP" mode moves up or down. 14 MINUS/PLUS (+/-) button Increases or decreases the adjustment with OSM menu. Small screen which adjusted "PIP" mode moves left or right. 15 SET button Makes - NEC M40 | User Manual - Page 10
, the remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor of the LCD monitor, or when there is an object in the path. POWER GUIDE RGB1 RGB2 RGB3 HDMI DVD/HD VIDEO TV OPTION PICTURE MODE SIZE AUDIO SOUND INPUT 1 4 7 DISPLAY - NEC M40 | User Manual - Page 11
top and the LCD indicator light is on the bottom. This will allow for proper ventilation and will extend the lifetime of the monitor. Improper ventilation may shorten the lifetime of the monitor. LED Indicator Mounting location • The ceiling and wall must be strong enough to support the monitor and - NEC M40 | User Manual - Page 12
damaging the screen face, place the protective sheet on the table underneath the LCD. The protective sheet was wrapped around the LCD in the original packaging. Make sure there is nothing on the table that can damage the monitor. When using mounting accessories other than NEC compliant and approved - NEC M40 | User Manual - Page 13
the display with the Tabletop Stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor (approx. M40: 32.6Kg/M46: 39.3Kg) in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamp and screw (Figure 8). Screw - NEC M40 | User Manual - Page 14
LCD is used in an enclosed area or if the LCD panel is covered with a protective screen, please check the inside temperature of the monitor into the battery compartment. • Do not touch exposed battery acid, it may injure • Refer to your equipment user manual for further information. 4. Connect the - NEC M40 | User Manual - Page 15
. 10. Recommended Adjustments To reduce the risk of the "image persistence", please adjust the following items based on the application being used: "SCREEN SAVER", "SIDE BORDER COLOR" (See page 27) "DATE & TIME", "SCHEDULE SETTINGS" (See page 25). It is recommended that the "FAN CONTROL" setting - NEC M40 | User Manual - Page 16
attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards and pixel clock over 165MHz may - NEC M40 | User Manual - Page 17
English Connecting to a Macintosh Computer Connecting your Macintosh computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or drivers may not display images correctly. Connect the LCD Monitor to Macintosh • To connect the VGA IN connector (mini D-sub - NEC M40 | User Manual - Page 18
for audio input. For connection, select [IN1], [IN2] or [IN3] from the AUDIO INPUT button. • Mode selection, see "DVI MODE" of page 28. LCD monitor To DVI output DVI-D connector To audio output Equipment with a digital interface such as a personal computer with RGB output (TMDS) DVI-D connector - NEC M40 | User Manual - Page 19
output RCA RCA Connecting a DVD Player with component out* Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user's manual for more information. Connect the LCD Monitor to a DVD Player • To connect the DVD/HD IN connector (RCA) on the - NEC M40 | User Manual - Page 20
to your DVD player user's manual for more information. Select [HDMI] from the AUDIO INPUT button. Connect the LCD Monitor to a DVD Player • Please use the HDMI cable with HDMI logo. • You may need some seconds to show the signal. • We do not support PC-DVI signal. LCD monitor To HDMI output HDMI - NEC M40 | User Manual - Page 21
Connecting to a Stereo Amplifier* You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner's manual for more information. Connect the LCD Monitor to a Stereo Amplifier • Turn on the LCD monitor and the amplifier only after all connections have been made. • Use an - NEC M40 | User Manual - Page 22
the National Electrical Code (NEC), in particular Section 820. LCD MONITOR. • When both VHF and UHF antennas are combined: Attach an optional antenna cable signal combiner to the LCD MONITOR available channels. CAUTION: The screen of the coaxial cable is GUIDE button to select the INDEX page. *: - NEC M40 | User Manual - Page 23
Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD. Main Power Switch Power Button English-21 POWER GUIDE RGB1 RGB2 RGB3 HDMI DVD/HD VIDEO TV OPTION PICTURE MODE SIZE AUDIO SOUND - NEC M40 | User Manual - Page 24
Troubleshooting page 35) * When in Eco Standby Mode RS-232C controls do not function. Using Power Management The LCD monitor . FULL: Display in entire screen. WIDE*: Expand 16:9 letter box signal to entire screen. ZOOM (DYNAMIC): Expand 4:3 pictures to the entire screen with non-linearity. (Some - NEC M40 | User Manual - Page 25
English OSM (On-Screen-Manager) Controls Input source Main Menu Icons Main Menu Item Sub Menu Adjustment Settings ADAPTIVE CONTRAST Select Goto Adjustment Key Guide Press UP or DOWN button to select sub-menu. Press SET. Return Close Press UP or DOWN, PLUS or MINUS to select the function - NEC M40 | User Manual - Page 26
SIM. DICOM GSDF curve simulated for LCD type. PROGRAMMABLE A programmable gamma curve can be loaded using NEC software. ADAPTIVE CONTRAST* Sets the level SETTINGS. ADJUST AUTO SETUP INPUT VGA, RGB/HV only Automatically adjusts screen size, H position, V position, Clock, Clock Phase, White - NEC M40 | User Manual - Page 27
a 1920 x 1080 resolution, the image will be scaled down to fit the screen.) Displays an image as large as possible without changing the aspect ration. Maintains is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. If no problem is - NEC M40 | User Manual - Page 28
MIDDLE LARGE PIP POSITION Determines where the PIP appears on the screen. PIP RESET Resets PIP options back to factory settings. LANGUAGE 10 seconds for the Information OSM to appear is available. MONITOR INFORMATION Monitor Information. OSM TRANSPARENCY Set the transparency level of the OSM - NEC M40 | User Manual - Page 29
seconds. TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 25) through a distribution amplifier. H MONITORS Number of monitors arranged horizontally. V MONITORS Number of monitors arranged vertically. POSITION Select which section of the tiled image to be - NEC M40 | User Manual - Page 30
When DVD/HD or VIDEO input signal is present the monitor will change and keep to the DVD/DH or VIDEO degradation caused from using a long cable. LONG CABLE MANUAL Manually compensates for image degradation caused from using a long screen. UNDER SCAN Image size stays within the display area. The - NEC M40 | User Manual - Page 31
FACTORY RESET Resets the following settings within the ADVANCED OPTION menu back to factory setting: INPUT DETECT, LONG CABLE ON/OFF, LONG CABLE MANUAL, DVI MODE, SCAN CONVERSION, S-VIDEO MODE, SCAN MODE. Resets OSM options back to factory settings EXCEPT FOR: CHANGE SECURITY PASSWORD and SECURITY - NEC M40 | User Manual - Page 32
image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant works in conjunction with the Monitor ID, allowing control of up to 26 individual Multeos monitors. For example: if there are many monitors being used in the - NEC M40 | User Manual - Page 33
English This LCD monitor can be controlled via personal computer or wireless remote control using an RS-232C connection. MONITOR ID and IR CONTROL Using one PC or one infrared wireless controller, up to 26 individual M40/M46 monitors can be controlled through a daisy chain via RS-232C connection. - NEC M40 | User Manual - Page 34
input signals Connection LCD Monitor + PC MULTEOS MULTEOS PC (Out) M40/M46 monitors that are daisy-chained together please use the extended control command. Instructions for the extended control command can be found on the CD included with the display. The file is called "External_control_M4X.pdf - NEC M40 | User Manual - Page 35
been executed or not. (4) This LCD monitor sends various codes other than return monitor ON OFF(stand by) DVI(DVI-D) VGA(D-SUB) RGB/HV(BNC) HDMI Video DVD/HD S-VIDEO TV HIGHBRIGHT STANDARD Around AV complete information please see file "External_Control_M4X.pdf" on the CD-ROM. HEX Data - NEC M40 | User Manual - Page 36
monitor to send its capabilities (such as screen size and resolutions supported LCD monitor to any VESA standard (FDMIv1) third party mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device. NEC recommends using - NEC M40 | User Manual - Page 37
of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but touch the keyboard or mouse). RED LED on monitor is blinking • A certain failure might have occurred, please contact your nearest authorized NEC DISPLAY SOLUTIONS service - NEC M40 | User Manual - Page 38
Specifications - M40 Product Specifications LCD Module Pixel Pitch: Resolution: Colour: Brightness: Contrast Ratio: Viewing /GOST-R Power Management VESA DPM Plug & Play VESA DDC2B, DDC/CI Accessories User's manual, Power Cord, Video Signal Cable, Remote Control, AA Battery x 2, Clamp x 3, - NEC M40 | User Manual - Page 39
Specifications - M46 English Product Specifications LCD Module Pixel Pitch: Resolution: Colour: Brightness: Contrast Ratio: GOST-R Power Management VESA DPM Plug & Play VESA DDC2B, DDC/CI Accessories User's manual, Power Cord, Video Signal Cable, Remote Control, AA Battery x 2, Clamp x 3, - NEC M40 | User Manual - Page 40
detect 24 TXC- 4) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 1 3 TXD 4 connected to 6 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC This LCD monitor uses RXD, TXD and GND lines for RS-232C control. Mini D-SUB 9P 5 9 English-38 - NEC M40 | User Manual - Page 41
is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode. M40 Mode Power consumption the product, or if applicable, follow any agreements made between yourself and NEC. The mark on electrical and electronic products only applies to the current
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
 |
 |
User’s Manual
M40/M46