NEC MD212MC MDC3MP-BNDL : user's manual

NEC MD212MC - MultiSync - 21.3" LCD Monitor Manual

Get NEC MD212MC - MultiSync - 21.3inch LCD Monitor PDF manuals and user guides
UPC - 805736025118
View all NEC MD212MC manuals
Add to My Manuals
Save this manual to your list of manuals

NEC MD212MC manual content summary:

  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 1
    INSTALLATION & MAINTENANCE GUIDE M D 2 12MC M D 2 13MC M D 2 13MG
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 2
    21 Specifications - MD212MC ...English-25 Specifications - MD213MC ...English-26 Specifications - MD213MG ...English-27 Features ...English-28 Troubleshooting avoid any problems. Earth NEC is a registered trademark of NEC Corporation. ErgoDesign is a registered trademark of NEC Display Solutions
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 3
    serviced in the country where it was purchased. Intended Use MD212MC/MD213MC/MD213MG are intended to be used for displaying and viewing of digital images for diagnosis by trained physicians. Caution: MD212MC/MD213MC/MD213MG cannot be used for a life-support as cell phones. • the LCD is integrated
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 4
    MD213MC 21.3" Diagnostic Imaging Color LCD Monitor MD213MG 21.3" Diagnostic Imaging Grayscale LCD Monitor Model Number: L217TG (MD212MC)/L218TJ (MD213MC)/ L218TL (MD213MG) UMDNS Code: 16-603 NEC Display Solutions with the instructions, may cause Radio-TV Interference Problems." This booklet
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 5
    . For example, if an image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 6
    Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass cleaner! • Adjust the monitor's luminance and This model is set up in the factory so that the NEC logo is briefly displayed after the monitor is powered on. This feature can be turned on or
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 7
    the following: • MD212MC/MD213MC/MD213MG monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (DVI-D to DVI-D cable)*1 • Quick Reference Guide • CD-ROM x 2 • Cable Cover Power Cord (Type of power cord included will depend on the where the LCD monitor is to be shipped
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 8
    Quick Start To attach the LCD monitor to your system, follow these instructions: NOTE: Make sure to read "Recommended Use" before installation. In order to display the maximum resolution, a display controller is required which can output a resolution of 1200 x 1600 (in portrait mode) or 1600 x
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 9
    on/off repeatedly. 11. No-touch auto adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further Manual for a full description of these OSD controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 10
    height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Screen Rotation Before rotating, the screen must be raised to raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1). To rotate screen, place hands on
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 11
    M4 size screws (Length: bracket thickness + 10mm). Recommended Fasten Force: 98 - 137N•cm To avoid blocking vent, keep adequate space above and behind the monitor when using with flexible arm. 100 mm 100 mm Weight of LCD assembly: 7.5 kg (MD212MC/MD213MC) 7.7 kg (MD213MG) Figure F.1 English-9
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 12
    21 1 LED Indicates that the power is on. 2 RESET Resets the OSD back to factory settings. NOTE: With no input signal on the screen, press RESET button for at least 3 seconds to display the visual inspection (grayscale) drawing and check the display light, allowing the monitor to make adjustments
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 13
    Adjusts the image displayed for non-standard video inputs. BLACK LEVEL (Analog input only) Adjust the black level manually. Auto Adjust , this function does not operate (MD213MC/MD213MG only). DOWN / UP Controls Vertical Image Position within the display area of the LCD. When digital QXGA (1536 x
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 14
    menu section of the user's manual for detailed instructions. When digital QXGA (1536 x 2048 or 2048 x 1536) of the medical monochrome signal is connected, this function does not operate (MD213MC/MD213MG only). Color Control Systems (Only for MD212MC/MD213MC) Color Control Systems: Nine preset
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 15
    electronically compensates for the slight variations in the white uniformity level, as well as for deviations in color that may occur throughout the display area of the screen. These variations are characteristic of LCD manually the monitor waits in Landscape mode) for MD213MC/MD213MG. If ON is
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 16
    and vertical frequencies. Indicates the model and serial numbers of your monitor. OSD Warning OSD Warning menus disappear with Exit button. NO BACKLIGHT LIFETIME: At 1000/500/0 hours, the OSD warning will be displayed. The display cannot hold user set luminance levels, however, white balance will be
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 17
    adjust. When LUMINANCE is adjusting, a numerical value blinks. Adjusts the image displayed for non-standard video inputs. Press "SELECT" to adjust. Any adjustment active. Allows you to manually adjust the black level. Press "Left" or "Right" to adjust. Allows you to manually adjust the R/G/B black
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 18
    connect 2 or more PCs to the monitor, using the ON or OPTION settings is suitable. Controls Horizontal Image Position within the display area of the LCD. Press "Left" or "Right" to 1536) of the medical monochrome signal is connected, this function does not operate (MD213MC/MD213MG only). English-16
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 19
    manually select (Gamma function*) the brightness level of grayscale display such that its brightness (the human perceived value) appears correct. Color Control (Only for Color Control Systems: Nine preset color settings. MD212MC/MD213MC Original color presented by the LCD panel that is unadjustable.
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 20
    MD213MC) Side Border (MD213MG) LED Brightness Controls the brightness of the LED on the monitor. UNIFORMITY This function electronically compensates for the slight variations in the white uniformity level as well as for deviations in color that may occur throughout the display to manually adjust
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 21
    4 types of settings. OFF (MD212MC/MD213MC): The Display Image is COLOR. NORMAL (MD213MG): Displays the color signal in grayscale. MODE1: Input is 8 bits monochrome. The display shows a grayscale image. This mode is used only green. MODE2: Input is R/G/B Color, but monitor changes the color space to
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 22
    input. Press "Left" or "Right" to select. Clamp position: Operating your monitor at a non-standard timing may cause images to appear darker than normal or images to their normal state. Selects the Calibration mode (page 21). Displays an all white screen. Used for copy calibration. Cooling fans are implemented
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 23
    of the monitor) Figure 2 display panel approximately 5° backward and place the USB sensor in the center of the display panel (Figure 2). NOTE: Place the USB sensor flat against the LCD to avoid external light contamination. DO NOT press the calibrator against the display panel. Figure 4 English-21
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 24
    approximately 5° backward and place the USB sensor in the center of the display panel (Figure 7). NOTE: Place the USB sensor flat against the LCD to avoid external light contamination. DO NOT press the calibrator against the display panel. Figure 9 * MD212MC/MD213MC only. English-22 Figure 10
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 25
    the calibration is successfully completed, the white points* and luminance of Display A and Display B should match. After the CALIBRATION SUCCEEDED message appears (Figure 12), press SELECT to continue into the FINE TUNING MODE*1. *1: MD213MG does not have FINE TUNING MODE. 10. At the FINE TUNING
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 26
    in the Mode selection (Figure 17). Figure 17 Figure 18 3. Select the Color setting in COLOR*2 selection and Gamma setting in GAMMA selection. *2 MD213MG does not have COLOR selection. 4. Press SELECT to start the DICOM MEASUREMENT. This may take several minutes depending on user setting. 5. After
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 27
    - MD212MC Monitor Specifications MD212MC Monitor Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 54.0 cm/21.3 inches 54.0 cm/21.3 inches 1200 x 1600 (Portrait) 1600 x 1200 (Landscape) Active matrix; thin film transistor (TFT) liquid crystal display (LCD); UA
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 28
    - MD213MC Monitor Specifications MD213MC Monitor Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 54.0 cm/21.3 inches 54.0 cm/21.3 inches 1536 x 2048 (Portrait) 2048 x 1536 (Landscape) Active matrix; thin film transistor (TFT) liquid crystal display (LCD); UA
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 29
    - MD213MG Monitor Specifications MD213MG Monitor Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 54.0 cm/21.3 inches 54.0 cm/21.3 inches 1536 x 2048 (Portrait) 2048 x 1536 (Landscape) Active matrix; thin film transistor (TFT) liquid crystal display (LCD); SA
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 30
    Play: The Microsoft® solution with the Windows® operating system facilitates setup and installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically optimizing display performance. Intelligent power management
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 31
    to erase the image. NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Message "OUT OF RANGE" is displayed (screen is either blank or shows rough images
  • NEC MD212MC | MDC3MP-BNDL : user's manual - Page 32
    on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced energy saving capability. When a VESA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
MD212MC
MD213MC
MD213MG
INSTALLATION & MAINTENANCE GUIDE