NEC MD304MC MultiSync MD304MC : user's manual

NEC MD304MC - MultiSync - 29.8" LCD Monitor Manual

Get NEC MD304MC - MultiSync - 29.8inch LCD Monitor PDF manuals and user guides
UPC - 805736025750
View all NEC MD304MC manuals
Add to My Manuals
Save this manual to your list of manuals

NEC MD304MC manual content summary:

  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 1
    INSTALLATION & MAINTENANCE GUIDE MD304MC
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 2
    Specifications ...English-15 Features ...English-16 Troubleshooting ...English-17 Appendix ...English-18 Self Calibration ...English-25 White Point Matching/Copy Calibration English-27 Using the Auto Brightness function English-29 TCO'03 ...English-30 problems. NEC Display Solutions
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 3
    serviced in the country where it was purchased. Intended Use MD304MC is intended to be used for displaying and viewing of digital images for diagnosis by trained physicians. Caution: MD304MC cannot be used for a life-support in the patient area after the LCD is integrated into a medical system.
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 4
    (Section 3) MD304MC 29.8" Diagnostic Imaging LCD Monitor L307TD 16-603 NEC Display Solutions Europe GmbH installed and used in accordance with the instructions, may cause harmful interference to radio to Identify and Resolve Radio-TV Interference Problems." This booklet is available from the U.S.
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 5
    pressure on the LCD panel can cause serious damage. Image Persistence: Image persistence is when a residual or "ghost" image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images being displayed for a long
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 6
    LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass cleaner! • Adjust the monitor are typing. • Avoid displaying fixed patterns on the monitor for long periods of time the LCD Panel • When the liquid crystal panel is stained with dust or dirt, please
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 7
    cord included will depend on the where the LCD monitor is to be shipped) QuicGk uRideeference Clamp Screws CD-ROM x 2 Quick Reference Guide DVI-D to DVI-D cable Cable Cover NOTE: This monitor can be equipped with optional loudspeakers: "MultiSync Sound bar". Please ask your dealer or check
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 8
    Quick Start To attach the LCD monitor to your system, follow these instructions: NOTE: Make sure to read "Recommended Use" before installation. In order to display the maximum resolution, a video card that can output a resolution of 2560 x 1600 is needed. The monitor must be installed or carried
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 9
    on/off repeatedly. 10. No-touch auto adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further manual for a full description of these OSD controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this manual
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 10
    height (Figure RL.1). NOTE: Handle with care when raising or lowering the monitor screen. Figure RL.1 Screen Rotation Before rotating, the screen must be raised to raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1). To rotate screen, place hands on
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 11
    Arm Installation This LCD monitor is designed for use with a flexible arm. To prepare the monitor for alternate mounting purposes: NOTE: The monitor must be installed or moved by two or more people. • Refer to instructions included with the flexible arm for detailed instructions. • To fulfill the
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 12
    Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: To access OSD menu (Page 23, Tag9 "OSD ROTATION").* 9 KEY GUIDE The Key Guide appears on screen when the OSD control menu is accessed. The Key Guide will rotate when the OSD control menu is rotated.
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 13
    for custom setting instructions. AUTO BRIGHTNESS There monitor with the best BRIGHTNESS setting*1. 2: Adjusts the brightness automatically for the best BRIGHTNESS setting based on the white display display area of the LCD. DOWN / UP Controls Vertical Image Position within the display area of the LCD
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 14
    Controls menu section of this manual for detailed instructions. Color Control Systems Color Control , sRGB: Original color presented by the LCD panel that is unadjustable. PROGRAMMABLE: The color connected to the DVI-I connector (DVI-I) of the monitor. Otherwise the MAC may not turn on. NOTE:
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 15
    are not supported. If you have any problems, please refer to the Troubleshooting section of this manual. VIDEO save mode, the LED on the front of the monitor blinks amber. While in power save mode, push any the display area of the screen. These variations are characteristic of LCD panel technology.
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 16
    selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at 2560 about the current resolution display and technical data including Of Range menu will appear. PORTRAIT WARNING: When the monitor is used in the portrait position, the brightness value
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 17
    Specifications English Monitor Specifications MD304MC Monitor Notes LCD Module Diagonal: 75.6 cm/29.8 inches Viewable Image Size: 75.6 cm/29.8 inches Native Resolution (Pixel Count): 2560 x 1600 Active matrix; thin film transistor (TFT) liquid crystal display (LCD); 0.251 mm dot pitch; 350
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 18
    Display Working Group (DDWG) for digital connections between computers and displays. As a digital-only connector, analog support P&D (Plug and Display): The VESA standard for digital flat panel monitor interfaces. It is by NEC Display Solutions Europe GmbH, providing intuitive access to all monitor
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 19
    in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card with respect to compatibility and recommended settings. • Check
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 20
    , by detecting the brightness level of your environment and adjusting the monitor with your BRIGHTNESS setting. 2: Adjusts the brightness automatically for the best BRIGHTNESS setting based on the white display area. The environmental brightness sensor (Auto dimming sensor) has no function
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 21
    the new signal faster. When using an external switching device to connect 2 or more PCs to the monitor, using the ON or OPTION settings is suitable. Controls Horizontal Image Position within the display area of the LCD. Press "Left" or "Right" to adjust. Controls Vertical Image Position within the
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 22
    of the screen. Allows you to manually select (Gamma function*) the brightness level Display Function for optimum human visual perception. PROGRAMMABLE: A programmable gamma curve can be loaded using NEC distributed across the intensity spectrum by a monitor, Gamma is relationship between the input
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 23
    Original color presented by the LCD panel that is unadjustable. PROGRAMMABLE: supported. If you have any problems, please refer to the Troubleshooting section of this manual monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, then the monitor
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 24
    monitor. The LED on the front can be blue or green. This function electronically compensates for the slight variations in the white uniformity level as well as for deviations in color that may occur throughout the display area of the screen. These variations are characteristic of LCD panel manually
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 25
    monitor changes the color space to YUV. The Display Image will become monochrome, because only Y data passes the R/G/B LUT. AUTO: The OSD rotates automatically when the monitor is rotated. OSD ROTATION is set to AUTO by default. MANUAL the display. NOTE: Some input signals may not be supported by
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 26
    in order to accurately display the image. Tile Comp with 4 monitors (black area shows monitor frames): monitor1 monitor2 monitor1 LCD Monitor will be activated. You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input source the monitor
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 27
    calibration can be performed, display should warm-up for a minimum 30 minutes. If the USB sensor is plugged in before the monitor is warmed up, (Figure S.6). NOTE: If CUSTOM is selected, the Gamma Value can be manually changed in intervals of 0.1 at 0.5-4.0. If SKIP is selected, the GAMMA
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 28
    USB sensor to be placed on the center of the display panel (Figure S.7). Tilt the display panel approximately 5˚ backward and place the USB sensor in the center of the display panel (Figure S.1). NOTE: Place the USB sensor flat against the LCD to avoid external light contamination. DO NOT press the
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 29
    closely. Before proper copy calibration can be performed, displays should warm-up for a minimum 30 minutes. If the sensor is plugged in before the at the back of the monitor. Figure C.2 Display A - SOURCE display of white point to copy. Display B - TARGET display which performs a copy calibration
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 30
    display panel (Figure C.8). Tilt the display panel approximately 5˚ backward and place the USB sensor in the center of the display panel (Figure C.1). NOTE: Place the USB sensor flat against the display is unsatisfactory, there are two options: (A) Manually fine tune the white point using the "LEFT
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 31
    the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The purpose of this
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 32
    Displays label. This means that your display of the features of the TCO'03 Display requirements: Ergonomics • Good visual ergonomics and to reduce sight and strain problems. Important parameters are luminance, direction. Our labelling system started with displays in 1992 and is now requested by
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 33
    manual). Congratulations! The product you have just purchased carries the TCO'06 Media Displays label. This means that your display to TCO´06 Media Displays are specifically designed for high Displays: Ergonomics • Good visual ergonomics and image quality in order to reduce vision and strain problems
  • NEC MD304MC | MultiSync MD304MC : user's manual - Page 34
    of the product and country-specific information on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
MD304MC
INSTALLATION & MAINTENANCE GUIDE