NEC NP1150 NP115 : RS232 codes- Projectors

NEC NP1150 - XGA LCD Projector Manual

Get NEC NP1150 - XGA LCD Projector PDF manuals and user guides
UPC - 805736019568
View all NEC NP1150 manuals
Add to My Manuals
Save this manual to your list of manuals

NEC NP1150 manual content summary:

  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 1
    2011 This file contains information about NEC projector control commands. Model Name GT60 NP3150 : NP1150/NP2150/NP3150/NP3151W Series NP4000 : NP4000/NP4001 Series NP905 : NP905/NP901W/VT800 : W T600/W T610/WT615 Series NP4100 : NP4100/NP4100W Series NP3250 : NP1250/NP2250/NP3250/NP3250W
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 2
    using the serial port on the projector A serial cable is required. 2. USB connection using the USB port on the projector A USB cable is required. 3. is required. 3-3.LAN connection using the LAN port on the projector A LAN cable is required. 3-4. LAN connection using a wireless LAN unit A wireless
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 3
    /610/WT615 Yes Yes Yes Yes No No NP4000/NP4001 Yes No No No Yes No NP1250/ No NP1200/NP2200 Yes No No No Yes No NP4100/NP4100W Yes No No No Yes No NP110/NP115/ No No No Yes No P350X/P530W/P420X Yes: Supported No: Not Supported Yes No No No Yes Yes * A USB cable
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 4
    The projector accept the "POWER ON" command during [POWER-SAVING] mode for[STANDBY MODE]. Supplement: (!1) Only the NP600/NP610/NP3200 series is compatible. (!2) Only the M300 series is compatible. [P350X/P350W/P420X Series] STANDBY MODE: "POWER-SAVING" Control Command POWER ON Yes: Supported No
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 5
    communication is done in a frame composed of header, data, and checksum. The frame sent from the controller to the projector is referred to as a command, and the one sent from the projector to the command as an reply is referred to as a response. The response has two types; Acknowledge (hereafter
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 6
    .) Response : This returns the value of received ID2 as is. * Projector ID : (8 Bit) This is a projector ID for the projector that sends and receives frames. Command : This specifies a projector ID for the projector that sends and receives commands. (individual notification) Entering 00H or FFH
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 7
    notification) CAUTION : * When the model code is set to "broadcast notification", the command becomes broadcast notification command, regardless of values of the projector ID. * Model code is specified using upper ranking 4 bits of data length. The lower ranking 4 bits becomes the upper bits of data
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 8
    ) Power On Command: 02H 00H FFH F0H 00H CKS NAK: A2H 00H 01H 20H 02H DATA01 DATA02 CKS Data Contents DATA01 Error types 00H : Not supported 01H : Parameter error 02H : Operation mode error 03H : Gain-related error 04H : Logo transfer error DATA02 Error description * When not
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 9
    (-) 7 Not used 8 Not used [ Wired/wireless LAN card ] The LAN connections will differ depending on the commercial LAN card that is used. - For information on supported LAN cards, visit: Global: http://www.nec-pj.com/ [Port Number] The TCP port number used is "7142". 4. List of Commands
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 10
    LAMP INFORMATION REQUEST 037-2. LAMP INFORMATION REQUEST 2 037-4. LAMP INFORMATION REQUEST 3 037-7. LAMP INFORMATION REQUEST 4 038. LAMP MODE REQUEST 039. LAMP 111. AUTO ADJUST EXECUTE2 305-1. BASE MODEL TYPE REQUEST 305-3. PROJECTOR INFORMATION REQUEST 00H 81H 00H 00H 00H 81H 00H C0H 00H 00H
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 11
    NP4000/NP4001 (NP4000 Series) 25: NP905/NP901W/VT800 (NP900 Series) 26: NP41/NP61/NP62 (NP62 Series) 27: NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S (NP600 Series) 28: GT1150/GT2150 (GT50 Series) 29: NP4100/NP4100W (NP4100 MODEL TYPE REQUEST 305.3 PROJECTOR INFORMATION REQUEST Availability by
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 12
    This reflects the "Projector ID" that has been set to the projector. (*2) Model code: "xxH" inscription This will differ depending on the projector. In case of /NP3150/NP3151W, NP1250/NP2250/NP3250/NP3250W, NP1200/NP2200, NP4000/NP4001, NP4100/NP4100W, NP905/NP901W/VT800, LT25/LT30/LT35, VT48/VT480/
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 13
    VT595/VT695/VT700, the term "DVI connector" has been changed to "COMPUTER". 006. RUNNING SENSE Function: This command acquires the operation mode of the projector. Command: 00H 81H 00H 00H 00H 81H Response: At the time of a success 20H 81H 01H xxH 01H DATA01 CKS (*1) (*2) (*3) Data Portion
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 14
    80H DATA01 .. DATA128 CKS (*1) (*2) (*3) Data Portion Contents DATA01 Projector type See DATA70..71 08H : NP4000 Projector 11H : NP62 Projector DATA02 Projector ID DATA02 1 .. 64 NP4000 1 .. 254 NP62/NP64 1 .. 254 NP216 DATA03 Reserved DATA04 Projector status 00H: Idling 01H: Power On DATA05
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 15
    Freeze Status (!2) 00H : OFF 01H : ON FFH : Not Supported DATA33 Test pattern display 1 00H : No display (Normal condition) ID) Pattern ID Pattern Name MT LT LT180 LT80 HT GT WT VT NP1000 NP3150 NP905 NP4000 NP4100 NP62 NP64 NP3250 NP216 02H Cross Hatch x* * x * x xx x * * * * * * *
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 16
    00H : Idling 04H : Power On 05H : Cooling 06H : Idling (Error occurrence) Other than above: (nondisclosure) Internal use of code during a state transition period DATA70 .. 71 Projector type
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 17
    T26 5 LT 380 LT 280 VT770 VT80 Series VT90 Series GT 115 0 GT 215 0 GT 500 0 GT 600 0 HT1000 HT1100 W T 600 W T 610 /W T 615 NP4000/NP4001 NP4100 NP4100W VT700 NP600 NP500 NP500 W NP400 NP300 NP610 NP510 NP510W NP410 NP310 NP610S NP510W S NP410 NP2200 NP1200 NP41/61 NP62 NP215 NP115 NP110 NP216 NP64
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 18
    DATA72 PC Card insertion 00H : Not inserted 01H : Inserted DATA73 USB Mouse connection 00H : Not connected 01H : Connected DATA74 Entry list type 01H : Default 02H : User DATA75 .. 82 Reserved DATA83 On-screen mute 00H : OFF 01H : ON DATA84 Reserved DATA85 Indicate Contents 00H = Picture
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 19
    : This command acquires the error information occurring with the projector. Command: 00H 88H 00H 00H 00H 88H Response: At : None bit1 : FPGA error bit2 : Temperature error(Sensor) bit3 : Lamp(or Lamp1) housing error (!) bit4 : Lamp(or Lamp1) data error (!) bit5 : Mirror cover error bit6 : Lamp2
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 20
    does not accept the other command during power on processing. 016. POWER OFF Function: This command switches off the main power of the projector. Command: 02H 01H 00H 00H 00H 03H Response: At the time of a success 22H 01H 01H xxH 00H CKS (*1) (*2) (*3) Response: At the time of a failure
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 21
    is specified. Terminal Terminal Number Name MT LT LT180 LT80 HT GT WT VT NP1000/3150 HT10 LT30 NP40 NP4000/4100 NP905 NP600 NP62/64 NP3250 NP610 NP2200 NP215 NP216 M300 P420 01H RGB1(RGB) ** * * HT1000 (!!!) HT410/HT510/HT1100 (!!!!) VT770 support Component and Viewer (!1) VT470/VT470JY/VT570/
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 22
    Supplement: * Picture mute is cancelled for the following: Input connector switching Video signal switching 021. PICTURE MUTE OFF Function: This command cancels the blank picture condition. Command: 02H 11H 00H 00H 00H 13H Response: At the time of a success 22H 11H 01H xxH 00H CKS (*1) (*2)
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 23
    A2H 13H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 024. ONSCREEN MUTE ON Function: This command blanks the on-screen display. Command: 02H 14H 00H 00H 00H 16H Response: At the time of a success 22H 14H 01H xxH 00H CKS (*1) (*2) (*3) Response: At the time of a failure A2H 14H 01H
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 24
    *tint increment/decrement brightness contrast color tint sharpness Not supported "LT170","VT60 series","VT70 series","VT80 series", "VT90 series" Not supported "HT410/HT510","LT180/LT25/LT30/LT35" volume Not supported "LT170","VT60 series","VT70 series" (except "VT80 series, VT90 series") Not
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 25
    This command sets the volume. Command: 03H 10H 00H 00H 05H DATA01 .. DATA05 CKS (*3) Data Portion Contents DATA01 05H fixed DATA02 Setting items 00H : Volume 01H : Bass 02H : Treble 03H : Balance DATA03 Setting mode 00H : Absolute value specification 01H : Relative value specification DATA04
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 26
    P420 Series) Aspect Ratio Cinema Aspect Ratio V-Zoom Aspect Ratio Stadium Aspect Ratio 5:4 Aspect Ratio 16:10 Aspect Ratio 15:9 Aspect Ratio Native (NP4000 Series) (NP4100 Series) DATA04 DATA05 00H 00H 00H 00H 00H 00H 01H 00H 01H 00H 01H 00H 02H 00H 02H 00H 02H 00H 03H 00H 03H
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 27
    of Normal mode values. It is also displayed with truncated a number after decimal point. 037-1. LAMP INFORMATION REQUEST Function: This command acquires the lamp information (in terms of Normal mode (values) of projector. Command: 03H 8CH 00H 00H 00H 8FH Response: At the time of a success 23H
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 28
    to HEX 2) Punch in DATA04 DATA03 DATA02 DATA01 (00002A30) 3) Change from HEX to Decimal - value will change to 10800 seconds : Starting time for lamp usage warning message (in terms of Normal mode values) DATA09 DATA10 DATA11 DATA12 00H DDH 6DH 00H : 7200000 second Calculator Procedure 1) Set
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 29
    information on the projector lamp in Eco mode. Command: 03H 96H 00H 00H 02H DATA01 DATA02 CKS (*3) Data Portion Contents DATA01 Target 00H : Lamp1 01H : Lamp2 DATA02 item 00H : Lamp Hour Meter (second) (!) 01H : Lamp usage time (second) (!!) 04H : lamp remaining amount until lamp warning message
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 30
    Meter This is the timer for normal lamp mode conversion. (!!) Lamp usage time This is the lamp total usage. It is displayed in the projector's menu. (!!!) NP4000/4001, NP4100/4100W : This function is not supported. 037-7. LAMP INFORMATION REQUEST 4 Function: This command acquires the information
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 31
    's menu. (!4) This setting is ignored, if the Item's unit is not time. (!5) NP4000/4001, NP4100/4100W : This function is not supported. 038. LAMP MODE REQUEST Function: This command acquires the setting of the lamp mode of projector. Command: 03H B0H 00H 00H 01H 07H BBH Response: At the time of
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 32
    Function: This command sets the lamp mode of projector. Command: 03H B1H 00H 00H 02H DATA01 DATA02 CKS (*3) 046. WXGA MODE SETTING REQUEST Function: This command acquires the setting of the WXGA Mode of projector. Command: 03H B0H 00H 00H 01H C3H 77H Response: At the time of a success 23H B0H
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 33
    049. WXGA MODE SETTING SET Function: This command sets the WXGA Mode of projector. Command: 03H B1H 00H 00H 02H DATA01 DATA02 CKS (*3) Data Portion Contents DATA01 C3H fixed DATA02 Setting Value 00H : OFF 01H : ON Response: At the
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 34
    0DH Error contents Unknown command. This current model does not support this function. Invalid values specified. Specified terminal is unavailable . REMOTE KEY CODE Function: This command sends remote control key codes of projector. Command: 02H 0FH 00H 00H 02H DATA01 DATA02 CKS (*3) Data Portion
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 35
    45 2DH 00H UNDO 46 2EH 00H 1 47 2FH 00H 2 48 30H 00H 3 49 31H 00H 4 50 32H 00H 5 51 33H 00H 6 52 34H 00H 7 53 35H 00H 8 54 36H 00H 9 55 37H 00H 0 56 38H 00H POSITION 57 39H 00H INFO. 58 3AH 00H PIXEL 59 3BH 00H KEYSTONE 60 3CH 00H AMPLITUDE 61 3DH 00H INPUT LIST 71 47H 00H PICMUTE ON (!!) 72 48H 00H
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 36
    ) 237 EDH 00H PSCODE(Passcode screen will be displayed at once) 238 EEH 00H LAMP MODE (!!!) Response: At the time of a success 22H 0FH 01H xxH 01H DATA01 sensor does not support the AUTO key. Use the AUTO (SHORT) key. (!!) HT10 series, LT180, LT30 series, NP40 series and NP4000 series (!!!) VT60
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 37
    051. CARBON SAVINGS INFORMATION REQUEST Function: This command acquires the Carbon Saving values on the projector. Command: 03H 9AH 00H 00H 01H DATA01 CKS (*3) Data Portion Contents DATA01 Acquirement items 00H : Total Carbon Savings 01H : Carbon Savings during operation Response: At
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 38
    Function: This command acquires the adjustment values. Command: 03H 04H 00H 00H 03H DATA01 .. DATA03 CKS (*3) Data Portion Contents DATA01 .. 02 Acquirement items (!) DATA03 00H fixed Response: At the time of a success 23H 04H 01H xxH 0DH DATA01 .. DATA13 CKS (*1) (*2) (*3) Data
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 39
    44H 44H 44H 45H 46H 47H 47H 47H 48H 49H 4AH 4BH 4CH 4CH 4CH 4CH 4CH 4CH 4CH 02H Black Correct / Inv Gain 00H Lamp Output 00H Signal Level / Auto Control 00H Signal Level / R/G/B Gain R 01H Signal Level / R/G/B Gain G 02H Signal Level / R/G/B Gain B 00H Signal Level / Y/Cb/Cr Gain Y 01H
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 40
    Cor. Lamp2 / Color Gain 90H 00H Picture Preset 91H 00H SweetVision Mode 92H 00H SweetVision Level 94H 00H Vertical Enhancer 95H 00H I/P Converter 96H 00H Lamp Mode Adjust 97H 00H Wall Color Command example: * In case of acquiring Picture Brightness 03H 04H 00H 00H 03H 00H 00H 00H 0AH
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 41
    the following cases: Input connector switching Video signal switching Volume adjustment 078-1. SETTING REQUEST Function: This command acquires the function information of projector. Command: 00H 85H 00H 00H 01H 00H 86H Response: At the time of a success 20H 85H 01H xxH 20H DATA01 .. DATA32 CKS
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 42
    03H GT5000 04H 01H 03H GT6000 05H 00H 03H HT1000 06H 00H 03H WT600 06H 00H 05H WT610/WT615 08H 00H 07H NP4000/NP4001 08H 00H 10H NP4100 08H 01H 10H NP4100W 10H 00H 08H VT700 10H 00H 09H NP600 10H 01H 09H NP500 10H 02H 09H NP500 W 10H 03H 09H NP400 10H
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 43
    time of a failure A0H 85H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 078-2. RUNNING STATUS REQUEST Function: This command acquires the status of the projector operation. Command: 00H 85H 00H 00H 01H 01H 87H Response: At the time of a success 20H 85H 01H xxH 10H DATA01 .. DATA16 CKS
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 44
    of a failure A0H 85H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 078-3. INPUT STATUS REQUEST Function: This command acquires the status of input signal of the projector. Command: 00H 85H 00H 00H 01H 02H 88H Response: At the time of a success 20H 85H 01H xxH 10H DATA01 .. DATA16 CKS
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 45
    A0H 85H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 078-4. MUTE STATUS REQUEST Function: This command acquires the status of the mute of projector. Command: 00H 85H 00H 00H 01H 03H 89H Response: At the time of a success 20H 85H 01H xxH 10H DATA01 .. DATA16 CKS (*1) (*2) (*3) Data
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 46
    NAME REQUEST Function: This command acquires the model name of the projector. Command: 00H 85H 00H 00H 01H 04H 8AH Response: At 0CH 0DH 0EH 0FH 00H 01H 02H Unknown command The current model does not support this function. Unvalid values specified. Specified terminal is unavailable or cannot be
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 47
    01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 097-196.WXGA MODE SETTING REQUEST Function: This command acquires the setting of the WXGA Mode of projector. Command: 03H B0H 00H 00H 01H C3H 77H Response: At the time of a success 23H B0H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*3) Data
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 48
    01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 098-198. PIP/SIDE BY SIDE SET Function: This command sets the PIP/SIDE BY SIDE of projector. Command: 03H B1H 00H 00H 03H DATA01 DATA02 DATA03 CKS Data Portion Contents DATA01 C5H fixed DATA02 Update target 00H : MODE 01H : POSITION
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 49
    functions. Command: 03H B6H 00H 00H 01H DATA01 CKS (*3) Data Portion Contents DATA01 Execution items Focus 00H ! 01H * !: According to projector setting *: Executing Response: At the time of a success 23H B6H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*3) Data Portion Contents DATA01
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 50
    Response: At the time of a failure A3H BAH 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 305-1. BASE MODEL TYPE REQUEST Function: This command acquires the projector type. Command: 00H BFH 00H 00H 01H 00H C0H Response: At the time of a success 20H BFH 01H xxH 10H DATA01 ... DATA16 CKS
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 51
    HT410 02H 05H 00H 05H HT510 00H 06H 00H 03H WT600 00H 06H 00H 05H WT610/WT615 03H 08H 00H 07H NP4000/NP4001 03H 08H 00H 10H NP4100 03H 08H 01H 10H NP4100W 01H 10H 00H 08H VT700 FFH 10H 00H 09H NP600 FFH 10H 01H 09H NP500 FFH 10H 02H 09H NP500W
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 52
    10H DATA01 ... DATA16 CKS (*1) (*2) (*3) Data Portion Contents DATA01 02H fixed DATA02 Projector Processing Status 00H : Idle 04H : Power On 05H : Cooling 06H : Idle(Error Standby) Other : Not Support Other than above : (nondisclosure) Internal use of code during a state transition
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 53
    .58 SQZ xAH : COMPONENT(60Hz) xBH : COMPONENT(50Hz) xCH : Un known xDH : NTSC xEH : PAL-M xFH : PAL-N FFH : Not Video Input Other : Not Support DATA07 Picture Mute 00H : OFF 01H : ON DATA08 Sound Mute 00H : OFF 01H : ON DATA09 On-screen mute 00H : OFF 01H : ON DATA10...DATA16
  • NEC NP1150 | NP115 : RS232 codes- Projectors - Page 54
    of Response DATA01 DATA02 Error types Error description Error contents 00H 00H Unknown command 00H 01H The current model does not support this function. 01H 00H Unvalid values specified. 01H 01H Specified terminal is unavailable or cannot be selected. 01H 02H Selected language
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
======================================================================
Control Commands for NEC Projector (Basic) Rev 02.03.11a
Copyright (C) NEC Display Solutions, Ltd. 2002-2010
----------------------------------------------------------------------
Updated on February 3, 2011
----------------------------------------------------------------------
This file contains information about NEC projector control commands.
Model Name
GT60
: GT5000/GT6000 Series
GT50
:
GT1150/GT2150 Series
HT
: HT1000/HT1100 Series
HT10
: HT410/HT510 Series
LT180
LT180
LT30
: LT25/LT30/LT35 Series
LT
:
LT220/LT240/LT240K/LT260/LT260K/LT245/LT265 Series
LT80
: LT280/LT380 Series
MT70
: MT860/MT1060/MT1065/MT1075 Series
NP60
:
NP40/NP50/NP60 Series
NP62
:
NP41/NP61/NP62 Series
NP1000
: NP1000/NP2000 Series
NP3150
: NP1150/NP2150/NP3150/NP3151W Series
NP4000
:
NP4000/NP4001 Series
NP905
: NP905/NP901W/VT800 Series
NP600
:
NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S Series
VT
:
VT770 Series
VT70
:
VT37/VT47/VT480/VT57/VT570/VT575/VT670/VT676 Series
VT80
:
VT48/VT480/VT580 Series
VT90
:
VT49/VT490/VT590/VT595/VT695 Series
VT700
:
VT700
WT
: WT600/WT610/WT615 Series
NP4100
:
NP4100/NP4100W Series
NP3250
: NP1250/NP2250/NP3250/NP3250W Series
NP610
:
NP310/NP410/NP410W/NP510/NP510W/NP510WS/NP610/NP610S Series
NP2200
:
NP1200/NP2200 Series
NP216
:
NP110/NP115/NP215/NP216 Series
NP64
:
NP43/NP64 Series
M300:
M260X/M260W/M300X/M300W Series
P420
P350X/P350W/P420X Series
======================================================================
Contents
1. Projector Control
2. Connection Method
3. Interface Conditions
4. List of Commands
5. Command Descriptions
6. Table of Response Error Codes
======================================================================
1. Projector Control
----------------------------------------------------------------------
NEC projectors make use of control commands that control the functions of the projector via connection with a
personal computer or another device.