NEC NP310 NP215 : NP01UCM spec brochure
NEC NP310 - XGA LCD Projector Manual
 |
UPC - 805736031126
View all NEC NP310 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC NP310 manual content summary:
- NEC NP310 | NP215 : NP01UCM spec brochure - Page 1
and Assembly - Universal NEC DISPLAY SOLUTIONS OF AMERICA, INC. Ceiling Mount Model: NP01UCM Maximum Load Capacity: 50 lb (22.7 kg) Read instruction sheet before you start installation and assembly. WARNING • Make sure that the supporting surface will safely support the combined load of - NEC NP310 | NP215 : NP01UCM spec brochure - Page 2
. Parts List Description Qty. A ball and socket mount 1 B 4 mm security allen wrench 1 C M5 x .8 x 10 mm socket pin type F screw 1 D #10-32 x 3/8" spade thumb screw 1 E #10-32 x 3/8" serrated washer head socket pin screw 1 F #14 x 2.5 phillips hex head wood screw 2 G ceiling plate - NEC NP310 | NP215 : NP01UCM spec brochure - Page 3
Chart for NEC Projectors Manufacturer NEC NEC NEC NEC NEC Model LT280 LT380 NP110 NP215 NP300 NEC NEC NEC NEC NEC NEC NEC NP310 NP400 NP410 NP410W NP500 NP500W NP500WS NEC NEC NEC NEC NEC NEC NEC NP510 NP510W NP510WS NP600 NP600S NP610 NP610S NEC NEC NEC NEC NEC NEC NEC NP901W NP905 - NEC NP310 | NP215 : NP01UCM spec brochure - Page 4
wood screws (F) as shown using 3/8" (10 mm) socket wrench. Skip to step 2. WOOD JOIST CEILING WARNING • It is the responsibility of the installer to verify that the G supporting surface will safely support the combined load of all attached hardware and components. IMPORTANT: Be sure to drill - NEC NP310 | NP215 : NP01UCM spec brochure - Page 5
to Concrete Ceilings WARNING • When installing ceiling mounts on concrete, verify that you have a minimum of 1 5/8" of actual concrete surface in the 1/4" diameter hole to be used for the concrete anchors. Do not drill into mortar joints! Concrete must meet ASTM C-90 specifications. • Concrete must - NEC NP310 | NP215 : NP01UCM spec brochure - Page 6
plate (G). Align the notch with one of the four holes of the ceiling plate (G) and secure ball and socket mount (A) with a M5 x 10 mm socket pin screw (C) using security allen wrench (B) as shown in detail 1. NOTE: Slotted set screw (K) is used to jam against the - NEC NP310 | NP215 : NP01UCM spec brochure - Page 7
(G). Align the notch with one of the four holes in the ceiling plate (G) and secure extension column with a M5 x 10 mm 3/8" socket pin screw (J) through extension column connector into slot in ball and socket mount (A) using security allen wrench (B). See detail 6. NOTE: Slotted set screws (K) are - NEC NP310 | NP215 : NP01UCM spec brochure - Page 8
(M) and foot of channel. CAUTION • It is the responsibility of the installer to ensure that the projector is properly ventilated. Feet of channels are used to raise the mount off the projector surface. Generic Screw L Foot of Channel Visit the Peerless Web Site at www.peerlessmounts.com 8 of - NEC NP310 | NP215 : NP01UCM spec brochure - Page 9
the spring loaded captive screw to secure the adapter plate to the mount. If not using the optional security feature, fasten thumb screw (D) in CEILING SET SCREW CUTAWAY VIEW OF CEILING PLATE (G) CEILING CAPTIVE SCREW A WOOD JOIST E D PROJECTOR 1 PROJECTOR ADAPTER PLATE 2 PROJECTOR
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
ISSUED: 04-11-06
SHEET #: 055-9458-6
09-25-09
Visit the Peerless Web Site at www.peerlessmounts.com
1 of 9
For customer care call 1-800-729-0307 or 708-865-8870.
±²³´µ¶·¸¹º»´·¼¹½¾¶¼±·´¼¿´ºÀ²Á¶³ºÂ´¶±³Ã
Read instruction sheet before you start installation and assembly.
Maximum Load Capacity: 50 lb (22.7 kg)
IMPORTANT! Be sure not to touch the projector while tightening the set screw on the
ball and socket mount. This may cause the image to be unaligned when you let go.
IMPORTANT!
Turn to the appropriate page for your ceiling installation.
•
Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and
components.
WARNING
Model:
NP01UCM
Installation and Assembly - Universal
Ceiling Mount
Table of Contents
Parts List
..............................................................................................................................................................................
2
To Wood Joist Finished Ceilings, Exposed Wood Joists or Wood Beam Ceilings
................................................................
4
To Concrete Ceilings
.............................................................................................................................................................
5
Flush Mount
..........................................................................................................................................................................
6
Extension Column
................................................................................................................................................................
7
Attaching Universal Adapter Plate to Projector
.....................................................................................................................
8