NEC P521 P401 : user's manual

NEC P521 Manual

Get NEC P521 PDF manuals and user guides
UPC - 805736032239
View all NEC P521 manuals
Add to My Manuals
Save this manual to your list of manuals

NEC P521 manual content summary:

  • NEC P521 | P401 : user's manual - Page 1
    User's Manual MultiSync P401 MultiSync P461 MultiSync P521 MultiSync P551
  • NEC P521 | P401 : user's manual - Page 2
    DISPLAY PROTECTION ...English-24 ADVANCED OPTION ...English-25 Remote Control Function ...English-28 Controlling the LCD monitor via RS-232C Remote Control English-30 Controlling the LCD monitor via LAN Control English-31 Features ...English-34 Troubleshooting ...English-35 Specifications - P401
  • NEC P521 | P401 : user's manual - Page 3
    NEC Display Solutions of America, Inc. 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Model: MultiSync P401 and used in accordance with the instructions, may cause harmful interference to radio
  • NEC P521 | P401 : user's manual - Page 4
    any problems. CAUTION: Please use the power cord provided with this display serviced in the country where it was purchased. Declaration Declaration of the Manufacturer We hereby certify that the color monitor MultiSync P401 NEC Display Solutions, Ltd. 4-13-23, Shibaura, Minato-Ku Tokyo 108-0023
  • NEC P521 | P401 : user's manual - Page 5
    and reflections. • Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass cleaner! • Adjust the monitor's brightness, contrast and sharpness controls to enhance readability. • Avoid displaying fixed patterns on the monitor for long periods of
  • NEC P521 | P401 : user's manual - Page 6
    Thumbscrew for optional stand x 2*2 Cable cover Clamp x 3 Setup Manual Wireless Remote Control and AA Batteries * Remember to save your original box and packing material to transport or ship the monitor. *1 Type and number of power cords included will depend on the where the LCD monitor is to be
  • NEC P521 | P401 : user's manual - Page 7
    Stand or other mounting accessory for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC the warranty. Orientation • When using the display in the portrait position, the monitor should be rotated clockwise so that the
  • NEC P521 | P401 : user's manual - Page 8
    When using the display with the optional table top stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamps and screws. 278 mm (P401) 304 mm (P461
  • NEC P521 | P401 : user's manual - Page 9
    " is selected in "POWER INDICATOR" (see page 23), LED will not light when the LCD monitor is in active mode. AMBIENT LIGHT SENSOR Detects the level of ambient light, allowing the monitor to make automatic adjustments to the brightness setting, resulting in a more comfortable viewing experience. Do
  • NEC P521 | P401 : user's manual - Page 10
    or HDTV device having a digital RGB output. * This connector does not support analog input. VGA IN (mini D-Sub 15 pin) To input analog RGB signals 232C functions. OUT connector: Connect RS-232C output. To connect multiple MultiSync monitors via RS-232C daisy Chain. LAN port (RJ-45) LAN connection. See
  • NEC P521 | P401 : user's manual - Page 11
    English Kensington Lock For security and theft prevention. EXTERNAL SPEAKER TERMINAL To output the audio signal from AUDIO 1, 2, 3, DPORT, HDMI and TV jack. Red terminal is plus (+). Black terminal is minus (-). Note: This speaker terminal is for 15W + 15W (8 ohm) speaker. Option board slot Slot
  • NEC P521 | P401 : user's manual - Page 12
    to set and change passwords, change channel and set REMOTE ID. ENT button* DISPLAY button Turns on/off the information OSD. See page 18. MENU button Turns button Increases or decreases audio output level. CH UP/DOWN button* GUIDE button* MUTE button Turns on/off mute function. STILL button ON
  • NEC P521 | P401 : user's manual - Page 13
    depends on which option board you use. Refer to the option board's manual for further information. *1: The product you purchased may not have this the Remote Control Point the top of the remote control toward the LCD monitor's remote sensor during button operation. Use the remote control within a
  • NEC P521 | P401 : user's manual - Page 14
    LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE (P401/P461), BY FOUR OR MORE PEOPLE (P521/P551). Failure to follow this caution may result in injury if the LCD monitor falls. CAUTION: Do not mount or operate the display and Maintenance" section of this manual for proper selection of AC power
  • NEC P521 | P401 : user's manual - Page 15
    source. 8. Adjust the sound Make volume adjustments when required. 9. Adjust the screen (See pages 20 and 21) Make adjustments of the screen display position when necessary. 10. Adjust the image (See page 20) Make adjustments such as brightness or contrast when required. 11. Recommended Adjustments
  • NEC P521 | P401 : user's manual - Page 16
    equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram DVD player with HDMI out DVD player Stereo Amplifier Second monitor* Computer (Analog) Computer (Digital) *: Multiple monitors that are daisy-chained have a limit to the
  • NEC P521 | P401 : user's manual - Page 17
    Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards with a pixel clock over 162MHz may not display an image correctly. Your LCD monitor displays proper image by adjusting the factory preset timing
  • NEC P521 | P401 : user's manual - Page 18
    turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD. OFF ON Main Power Switch Power Button Using the remote control English-16
  • NEC P521 | P401 : user's manual - Page 19
    Troubleshooting page 35) *1 When in Eco Standby Mode DDC/CI control does not function. *2 If "OFF" is selected in POWER INDICATOR (page 23), the LED will not light when the LCD monitor . Using Power Management The LCD monitor follows the VESA approved DPM Display Power Management function. The
  • NEC P521 | P401 : user's manual - Page 20
    Monitor ID, Input Source, Picture Size, etc. Press the DISPLAY button on the remote to bring up the Information OSD. ID number assigned to current monitor*7 ID number assigned monitor AMBIENT2 HIGHBRIGHT AMBIENT Mode The brightness of the LCD screen can be set to increase or decrease depending
  • NEC P521 | P401 : user's manual - Page 21
    English OSD (On-Screen-Display) Controls NOTE: Some functions may not be available THANK YOU FOR SAVING THE ENVIRONMENT. CARBON FOOTPRINT 86.0 % Goto Adjustment Return Close Adjustment Settings Key Guide Press UP or DOWN button to select sub-menu. Press SET. Press UP or DOWN, PLUS or
  • NEC P521 | P401 : user's manual - Page 22
    curve simulated for LCD type. PROGRAMMABLE A programmable gamma curve can be loaded using NEC optional software. MOVIE SETTINGS NOISE move left. V POSITION Controls the vertical position of the image within the Display area of the LCD. - All inputs except DVI, HDMI, DPORT Press + to move
  • NEC P521 | P401 : user's manual - Page 23
    Adjusts the vertical size of the image. - VGA, RGB/HV inputs only INPUT RESOLUTION VGA, RGB/HV inputs only If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. After selection, execute "AUTO SETUP" if required. If no
  • NEC P521 | P401 : user's manual - Page 24
    . SCHEDULE RESET PIP Resets the following settings within the SCHEDULE menu back to factory setting: OFF TIMER, SCHEDULE SETTINGS. KEEP PIP MODE Allows the monitor to remain in "PIP" and "TEXT TICKER" mode after powering off. When Power is returned, PIP and TEXT TICKER appear without having to
  • NEC P521 | P401 : user's manual - Page 25
    POSITION, INFORMATION OSD, OSD TRANSPARENCY, CLOSED CAPTION. MULTI DISPLAY MONITOR ID Sets the monitor ID number from 1-100 and group ID from A-J. LED located at the front of the monitor. ON If "OFF" is selected, LED will not light when the LCD monitor is in active mode. EXTERNAL CONTROL
  • NEC P521 | P401 : user's manual - Page 26
    . OFF DDC/CI ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor. ENABLE DISPLAY PROTECTION Resets the following settings within the DISPLAY PROTECTION menu back to factory setting: - RESET POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER
  • NEC P521 | P401 : user's manual - Page 27
    When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor, the monitor will automatically options have been made for the input. NORMAL LONG CABLE COMP Manually compensates for image degradation caused from using a long cable. EQUALIZE
  • NEC P521 | P401 : user's manual - Page 28
    based on input signal. NTSC PAL SECAM 4.43 NTSC PAL-60 SCAN MODE Some video formats may require different scanning modes in order to best display the image. HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only OVER SCAN Image size is larger than what can be
  • NEC P521 | P401 : user's manual - Page 29
    Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images being displayed for a long display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor
  • NEC P521 | P401 : user's manual - Page 30
    the REMOTE ID SET button on the remote control, use the KEYPAD to input the Monitor ID (1-100) of the display to be controlled via remote. The remote can then be used to operate the monitor having that specific Monitor ID number. When 0 is selected or when the remote control is in normal mode, all
  • NEC P521 | P401 : user's manual - Page 31
    will be shown at top left side of the screen. Monitor ID: Displays the ID number of the current monitor within the daisy chain. Target ID: Displays the ID number of the monitor that to be controlled via daisy chain from the current monitor. Press the "+" or "-" buttons to change the "Target ID" to
  • NEC P521 | P401 : user's manual - Page 32
    input signals Connection LCD Monitor + PC MultiSync monitor or multiple monitors that are daisy-chained together please use the control command. Instructions for the control command can be found on the CD included with the display. The file is called "External_control.pdf". Multiple monitors
  • NEC P521 | P401 : user's manual - Page 33
    and the other information provided in your software.) Access is gained to the HTTP server function by starting display or button's response can be slowed down or operation may not be accepted depending the settings of your network. Should this happen, consult your network administrator. The LCD monitor
  • NEC P521 | P401 : user's manual - Page 34
    in the "HOSTS" file of the computer being used, you can then access the network settings of the display via that host name using a compatible browser. Example 1: When the host name of the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd
  • NEC P521 | P401 : user's manual - Page 35
    correct. Apply Click this button to reflect the above settings. NOTE: Make sure to execute "the reboot" from the "reboot screen" or to turn the monitor off and then back on to enable the changing, after clicking [Apply]. NOTE: • If you execute a test, you may not receive an Alert mail. Should
  • NEC P521 | P401 : user's manual - Page 36
    monitor with a uniform color profile. This assures that the colors displayed on the monitor are exactly the same as on the color printout (with sRGB supporting you to connect your LCD monitor to any VESA standard (FDMIv1) third party mounting arm or bracket. NEC recommends using mounting interface
  • NEC P521 | P401 : user's manual - Page 37
    the power indicator option in the OSD is set to ON. RED LED on monitor is blinking • A certain failure might have occurred, please contact your nearest authorized NEC DISPLAY SOLUTIONS service facility. • If the monitor is powered off by the inside temperature being higher than the normal operating
  • NEC P521 | P401 : user's manual - Page 38
    Specifications - P401 Product Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: manual, Power Cord, Video Signal cable, Remote Control, AA Battery x 2, Clamp x 3, Screw x 9, CD-ROM, Thumbscrew for optional stand x 2, Cable cover NOTE: Technical specifications
  • NEC P521 | P401 : user's manual - Page 39
    - P461 English Product Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: manual, Power Cord, Video Signal cable, Remote Control, AA Battery x 2, Clamp x 3, Screw x 9, CD-ROM, Thumbscrew for optional stand x 2, Cable cover NOTE: Technical specifications
  • NEC P521 | P401 : user's manual - Page 40
    - P521 Product Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: manual, Power Cord, Video Signal cable, Remote Control, AA Battery x 2, Clamp x 3, Screw x 9, CD-ROM, Thumbscrew for optional stand x 2, Cable cover NOTE: Technical specifications
  • NEC P521 | P401 : user's manual - Page 41
    - P551 English Product Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: manual, Power Cord, Video Signal cable, Remote Control, AA Battery x 2, Clamp x 3, Screw x 9, CD-ROM, Thumbscrew for optional stand x 2, Cable cover NOTE: Technical specifications
  • NEC P521 | P401 : user's manual - Page 42
    1) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 1 3 TXD 4 connected to 6 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 2) REMOTE IN D-SUB 9P 5 9 3) REMOTE OUT English-40
  • NEC P521 | P401 : user's manual - Page 43
    of the product and country-specific information on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
User’s Manual
MultiSync P401
MultiSync P461
MultiSync P521
MultiSync P551