NEC PA302W User Manual
NEC PA302W Manual
 |
View all NEC PA302W manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC PA302W manual content summary:
- NEC PA302W | User Manual - Page 1
MultiSync PA242W MultiSync PA272W MultiSync PA302W User's Manual - NEC PA302W | User Manual - Page 2
the PICTURE MODE function English-17 Advanced OSD...English-18 Specifications - PA242W ...English-26 Specifications - PA272W ...English-27 Specifications - PA302W ...English-28 Features ...English-29 Troubleshooting ...English-30 Using the Auto Brightness function English-32 Self Calibration (PA302W - NEC PA302W | User Manual - Page 3
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns user user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems the monitor with - NEC PA302W | User Manual - Page 4
Party: NEC Display Solutions of America, Inc. Address: 500 Park Boulevard, Suite 1100 Itasca, Illinois 60143 Tel. No.: (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Model: MultiSync PA242W (PA242W) MultiSync PA242W (PA242W-BK) MultiSync PA272W - NEC PA302W | User Manual - Page 5
use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks - NEC PA302W | User Manual - Page 6
light sources to minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen. • If reflected light makes it hard for you to see your screen, use an anti-glare filter. • Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any - NEC PA302W | User Manual - Page 7
can be equipped with optional "MultiSync Soundbar Pro". Please ask your dealer or check our website. * Remember to save your original box and packing material to transport or ship the monitor. *1 Type and number of power cords included will depend on the where the LCD monitor is to be shipped. When - NEC PA302W | User Manual - Page 8
the LCD monitor to your system, follow these instructions: NOTE display card in your system (Figure A.2). For a MAC (PA242W only): Connect a Macintosh cable adapter (not included) to the button. Place hand on top of the monitor to push down the screen to the lowest position. Slide the lock button - NEC PA302W | User Manual - Page 9
downstream ports of the monitor. NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten and lower the monitor screen when you have installed the cables. USB Cable DisplayPort Cable HDMI Cable*1 DVI Cable (PA242W only) D- - NEC PA302W | User Manual - Page 10
for a full description of these OSD controls. NOTE: If you have any problems, please refer to the Troubleshooting section of this User's Manual. Power Button Figure E.1 Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower - NEC PA302W | User Manual - Page 11
Portrait to Landscape (Figure R.1). To rotate OSD menu between landscape and portrait, refer to "Controls" section. Figure R.1 Tilt Grasp top and bottom sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1). Figure TS.1 NOTE: Handle with care when tilting the - NEC PA302W | User Manual - Page 12
the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using the 4 screws from the stand removal and attach the arm to the monitor (Figure F.1). Figure S.1 100 mm 200 mm 100 mm 100 mm Weight of LCD assembly: 7.4 kg (PA242W) Figure F.1 100 mm Weight of LCD assembly - NEC PA302W | User Manual - Page 13
setting by OSD menu when you change input signal or turn off the monitor. Access OSD menu. Exits the OSD sub menu. Exits OSD Control the OSD menu is off*1. The Key Guide appears on screen when the OSD control menu is accessed. The Key Guide will rotate when the OSD control menu is user. English-11 - NEC PA302W | User Manual - Page 14
the display area of the LCD. DOWN / UP Controls Vertical Image Position within the display area of the LCD. H.SIZE (V.SIZE) (Analog For this a Moiré test pattern could be used. This function may alter the width of the picture. Use LEFT/RIGHT Menu to center the image on the screen. If the H.SIZE (or - NEC PA302W | User Manual - Page 15
. For this a Moiré test pattern could be used. If OSD menu for detailed instructions. SHARPNESS This function screen reddish and a higher color temperature will make the screen bluish. NATIVE is a default color temperature of LCD manual Tag1. * Only for PA242W. *1: RED, YELLOW, GREEN, CYAN, - NEC PA302W | User Manual - Page 16
When connecting a computer to each of the upstream ports, the monitor's USB downstream ports can be used by selecting this setting for on screen (PA242W only). *6 Setting for only one screen: the setting result is reflected on the corresponding Window (Main or Sub). Same setting for both screens: - NEC PA302W | User Manual - Page 17
Monitor enters power save mode automatically when the amount of surrounding light goes below the level that is determined by the user on your screen. Selecting OSD Location allows you to manually adjust the screen after 30 seconds, notifying you that the resolution is not at 1920 x 1200 for PA242W, - NEC PA302W | User Manual - Page 18
page 24). Displays electricity pricing in 6 Edition). Please check receipt of French's electricity prices or OECD data for French. French of of your monitor. OSD Warning appear. INTERLACED SIGNALS ARE NOT SUPPORTED: This function gives a warning Picture" in Troubleshooting for detailed information. - NEC PA302W | User Manual - Page 19
-definition television. Highest brightness setting. Native display color gamut. Suitable for use with color managed applications. Use ICC color software is available on the NEC Display Solutions website. - When PICTURE MODE is locked, "PICTURE MODE IS LOCKED" appears on screen. To unlock PICTURE MODE - NEC PA302W | User Manual - Page 20
the normal OSD. • Turn off and restart the monitor. To make an adjustment, ensure that the tag is highlighted, then press "SELECT". type of PRESET (see page 17). Adjusts the overall image and screen background brightness. Press "LEFT" or "RIGHT" to adjust. Adjusts the - NEC PA302W | User Manual - Page 21
Allows you to manually select the brightness will turn magenta. Adjusts color gamut. When the selected settings are outside of the LCD gamut, the indicator on the OSD will vision of the user, including those with color vision deficiency, there will be a variation in how the screen's color is seen - NEC PA302W | User Manual - Page 22
may occur throughout the display area of the screen. These variations are characteristic of LCD panel technology. This function improves the color display used side-by-side with a standard gamut display monitor. This feature compensates for the way the human adjust. * Only for PA242W. English-20 - NEC PA302W | User Manual - Page 23
Please use test pattern, user. OFF: A-NTAA is disabled. ON: If a change in signal is detected A-NTAA will adjust the monitor LCD. Press "LEFT" or "RIGHT" to adjust. V.POSITION Controls Vertical Image Position within the display area of the LCD. Press "LEFT" or "RIGHT" to adjust. * Only for PA242W - NEC PA302W | User Manual - Page 24
function (dot clock). For this a Moiré test pattern could be used. This function may present, then the monitor searches for a video signal from the other screen asking the user if they want to delay the turn off time by 60 minutes. Press any OSD button to delay the turn off time. * Only for PA242W - NEC PA302W | User Manual - Page 25
to appear on your screen. Selecting OSD Location allows you to manually adjust the position of . BOOT LOGO*2 The NEC logo is briefly displayed after the monitor is powered on. This appear on the screen after 30 seconds, notifying you that the resolution is not set to 1920 x 1200 for PA242W, 2560 x - NEC PA302W | User Manual - Page 26
SCREEN SAVER INPUT SETTING*2 When this function is activated; the brightness of the monitor when the monitor is rotated. the screen image moves supported by REDUCED. FULL: Screen image is set to FULL and is moved periodically in 4 directions. Screen off. NOTE: SCREEN SAVER works when monitor at - NEC PA302W | User Manual - Page 27
output signal be sent through a distribution amplifier to each individual monitor. H MONITOR: Select the number of horizontal displays. V MONITOR: Select the number of vertical displays. MONITOR No: Select a position to expand the screen. TILE COMP: Works in tandem with TILE MATRIX to compensate for - NEC PA302W | User Manual - Page 28
PA242W Monitor Specifications MultiSync PA242W Notes LCD Module Diagonal: 61.1 cm/24.1 inches Viewable Image Size: 61.1 cm/24.1 inches Native Resolution (Pixel Count): 1920 x 1200 Active matrix; thin film transistor (TFT) liquid crystal display (LCD Supported (Some systems may not support NEC - NEC PA302W | User Manual - Page 29
Monitor Specifications MultiSync PA272W Notes LCD Module Diagonal: 68.5 cm/27.0 inches Viewable Image Size: 68.5 cm/27.0 inches Native Resolution (Pixel Count): 2560 x 1440 Active matrix; thin film transistor (TFT) liquid crystal display (LCD Supported (Some systems may not support NEC DISPLAY - NEC PA302W | User Manual - Page 30
Monitor Specifications MultiSync PA302W Notes LCD Module Diagonal: 75.6 cm/29.8 inches Viewable Image Size: 75.6 cm/29.8 inches Native Resolution (Pixel Count): 2560 x 1600 Active matrix; thin film transistor (TFT) liquid crystal display (LCD Supported (Some systems may not support Hz NEC - NEC PA302W | User Manual - Page 31
installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your users to connect your MultiSync monitor to any VESA standard third party mounting arm or bracket. Visual Controller: Is a ground-breaking software family, developed by NEC - NEC PA302W | User Manual - Page 32
the User's Manual included with the device for detailed information on changing the signal from interlaced to progressive. • The monitor will image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images being - NEC PA302W | User Manual - Page 33
short blinks, depending on the type of problem detected. • If the LED signals a problem, please refer to qualified personnel for service. USB Hub does not operate • Check to make sure the USB cord is properly connected. Refer to your USB device User's Manual. • Make sure correct upstream is selected - NEC PA302W | User Manual - Page 34
LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor monitor will use when the monitor will go of brightness that the monitor will go down to - NEC PA302W | User Manual - Page 35
for a yellow color shift that typically occurs with long-term LCD usage. All PICTURE MODES are updated when Self Calibration is performed minutes. If this calibration is started before the monitor is warmed up, a warning will appear on-screen (Figure S.2). NOTE: Stand-alone calibration can - NEC PA302W | User Manual - Page 36
(Figure S.1). NOTE: Place the USB color sensor flat against the LCD to avoid external light contamination. DO NOT press the calibrator against the calibration. Stand-alone calibration may take several minutes depending on user settings. Figure S.3 7. After the CALIBRATION SUCCEEDED message appears - NEC PA302W | User Manual - Page 37
does not compensate for a typical yellow color shift due to long-term LCD usage. If this yellow shift is noticeable, please do Self Calibration. to a plain white background or use an application to display a white screen such as the editing screen of a word processor. 2. Using "LEFT" or "RIGHT" of - NEC PA302W | User Manual - Page 38
MODE message appears. 10. At the FINE TUNING MODE message (Figure C.6), press SELECT if the copy result is satisfactory. If the copy result is unsatisfactory, manually fine tune the white point using the "LEFT" and "RIGHT" keys, and press SELECT. 11. To end the calibration mode, press "EXIT". Figure - NEC PA302W | User Manual - Page 39
PA242W) Less than 1.4 W (PA272W) Less than 1.4 W (PA302W) Less than 0.2 W LED colour Green or blue Amber Unlit WEEE Mark (European Directive 2012/19/EU) Within the European Union EU-wide monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
 |
 |
MultiSync PA242W
MultiSync PA272W
MultiSync PA302W
User’s Manual