NEC PN-HE751 PN-HC/HE Series Operation Manual
NEC PN-HE751 Manual
 |
View all NEC PN-HE751 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC PN-HE751 manual content summary:
- NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 1
OPERATION MANUAL LCD MONITOR MODEL: PN-HE751 PN-HE651 PN-HC861 PN-HC751 PN-HC651 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 2
2 Recommended Use & Maintenance 8 Chapter 1 Installation Setup Overview 10 Mounting (for Customer 13 Mounting Precautions (For SHARP dealers and service engineers 14 Mounting Location 15 Orientation 16 Ventilation Requirements 17 Mounting on Walls or Ceilings 18 Chapter 2 Parts Names and - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 3
50 Controlling the Monitor via LAN 51 HTTP Browser 53 Commands 55 Chapter 7 Troubleshooting When a problem occurs with the monitor 58 Nothing is displayed 58 The image is not displayed correctly 59 An instruction or caution screen is displayed 60 Others (when connected to a computer 60 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 4
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY 1 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 5
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 6
safety and many years of trouble-free operation of your service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 7
spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • sides of the batteries according to the instructions in the compartment. • Do not mix reaction control in nuclear facility, medical life support system, and missile launch control in a weapon - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 8
TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor or malfunctioning. Refer the servicing to the service representative. Manual Scope - L anguage of OSD menu used in this manual is English by way of example. - Illustrations in this manual may not exactly represent the - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 9
> "Mounting (for Customer)" on page 10 > "Mounting Precautions (For SHARP dealers and service engineers)" on page 11 > "Mounting Location" on page 12 > "Orientation" on page For box contents, please refer to the Setup Manual. Product warranty does not cover damage caused by improper installation. 6 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 10
Setup Overview To ensure safety and many years of trouble-free operation of your product, please read the Safety your finger on the part marked with the p, and then pull the cover off. 2. See the instructions in the compartment and put in the supplied batteries (R03 ("AAA" size) x 2) with their plus - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 11
Connect external equipment • To protect the external equipment, disconnect the power cord of the monitor before making connections. • Refer to the user's manual of your equipment for further information. • The supplied cable clamps can be used to clamp the cables connected to the back of the monitor - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 12
4. Turning on the main power 1. Turn on the main power switch. 2. Press the POWER button to turn the power ON/OFF. You can also turn the power ON/OFF by pressing the MONITOR ON button/MONITOR OFF button on the remote control unit. When switching the main power switch or the POWER button off and back - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 13
other problems that may occur with the mounting equipment. If a problem is detected, refer to the qualified personnel or the supplier for service. of the precautions mentioned in "Mounting Precautions (For SHARP dealers and service engineers)". For long-term use The backlight used for this monitor - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 14
Mounting Precautions (For SHARP dealers and service engineers) When installing, removing or moving the monitor air vents of the monitor with the brackets. • For detailed information, refer to the instructions included with the mounting equipment. • There are 4 installation holes on the back. Mount - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 15
Installing a safety wire When installing the monitor to a wall or a ceiling, use commercially-available wall or ceiling mounting brackets, but also a safety wire. When attaching the safety wire to the monitor's handle, use the handle locations shown in the figure below. Possible locations for the - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 16
Orientation When using the monitor in a vertical installation, be sure to rotate it counterclockwise so that the right side is on the upper side and the left side is on the bottom. If installed in the wrong direction, heat may be trapped inside the monitor and the life of the display may be - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 17
Ventilation Requirements When mounting the monitor in an enclosed space or recessed area, leave adequate room between the monitor and the enclosure to allow heat to disperse, as shown below. For the monitor in landscape orientation 7-7/8 inch (200 mm) 2 inch (50 mm) 2 inch (50 mm) 1-5/8 inch (40 mm - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 18
Mounting on Walls or Ceilings Precautions when mounting the monitor on a wall or a ceiling Be sure to read this section before mounting the monitor on a wall or a ceiling to guarantee safety. • It may not be possible to mount the monitor on some walls or ceilings depending on their structure or - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 19
PN-HE751/PN-HC751 4 installations holes M8 15-3/4 inch (400 mm) PN-HC861 31-1/2 inch (800 mm) 4 installations holes M8 23-5/8 inch (600 mm) 31-1/2 inch (800 mm) 16 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 20
Chapter 2 Parts Names and Functions This Chapter Includes: > "Control Panel" on page 18 > "Terminal Panel" on page 19 > "Wireless Remote Control" on page 20 17 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 21
Control Panel PN-HE651/PN-HC651 PN-HE751/PN-HC861/PN-HC751 ⁞ ⁞ ❶ INPUT Button Serves as a settings button to make selections when the OSD screen is displayed. When the OSD screen is not displayed, the input switching menu is displayed. Input mode Video Audio HDMI1 HDMI1 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 22
with digital video interface complying with the HDMI standard. HDMI1 terminal also supports ARC (Audio Return Channel) for audio output. Connect an HDMI cable supporting ARC to this terminal. Connect audio devices supporting ARC to the HDMI1 (ARC) terminal. N OTE: ARC sends the monitor's sound - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 23
Wireless Remote Control ⁞ ⤕ ⤖ ⤗ ⤘ ⤙ ⤚ ⤛ ⤜ ⤒ ⤝ ⤓ ⤞ ⤔ ❶ POWER button Press the POWER button to turn the power ON/OFF. ❷ MONITOR buttons You can also turn the power ON/OFF by pressing the MONITOR ON button/MONITOR OFF button on the remote control unit. N OTE: - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 24
the computer and the external equipment before connecting the monitor to the computer. • Refer to the externals equipment's user manuals for available connection types and instructions for each piece of equipment. N OTE: • When the audio output connector of the connected audio device or computer is - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 25
Wiring Diagram Network Computer (RS-232C) Stereo amplifier : Other signals : Video signal : Audio signal USB port (USB storage device) Computer (stereo mini jack) Video player (stereo mini-jack) Computer (D-sub) Computer (HDMI) Video player (HDMI) Blu-ray or DVD player (HDMI) 22 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 26
The monitor can be connected to and used with video players and computers equipped with an HDMI output. For more information, refer to the user's manual of the player or the other devices. • Use an HDMI cable with the HDMI logo. • It may take a moment for the signal to appear after - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 27
discs, DVDs and streaming media, from being copied or broadcast illegally. N OTE: • Supports 1080p, 1080i, 720p@50 Hz/60 Hz, 480p@60 Hz, 576p@50 Hz, When supported, the monitor's remote control can be used to control the video device. N OTE: The instructions in this section guide you through - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 28
, connected devices are shown by their names. If no HDMI-CEC compatible device is found, make sure the device is connected, turned on, that it supports CEC, and that CEC is enabled. Depending on the manufacturer, the CEC feature may have a different name. Refer to the device's user - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 29
device is recording, the device remains on. Refer to the user's manual supplied with the HDMI-CEC compatible device for further information. Connect audio the ARC function to the HDMI1 (ARC) terminal using the ARC-supported HDMI cable. The Volume buttons of the remote control can control the - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 30
terminal panel on the side of the display. See page page 37 for instructions on using the Media Player. Compatible USB Storage Devices If the USB storage format. For more information on how to format a storage device, see the manual or the help section of your Windows®. Use a USB storage device of - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 31
Connecting a USB Device Connect a USB storage device to the USB Type-A of the monitor as shown in the figure below to display images and videos using the Media Player function. USB Type-A port N OTE: • Check the connector shape and orientation when connecting the USB device or cable. • Do not - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 32
Chapter 4 Basic Operation This Chapter Includes: > "Power On and Off Modes" on page 30 > "Operating Range for the Remote Control" on page 32 > "Showing the Information OSD" on page 33 > "Switching Between Picture Modes" on page 33 > "Setting the Aspect Ratio" on page 34 > "OSD (On-Screen Display) - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 33
Power On and Off Modes Power indicator status Mode Normal operation (On mode) Power indicator Lit green Input signal waiting state Flashing green Energy Mode The three following modes are available on the monitor. HDMI1 Setup Energy Mode Clock Auto Power Down Home Retail Office Standby - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 34
When [LAN] is selected for control Home mode • When no signal is input, "No signal" is displayed and the monitor enters the Input signal waiting state after a while. • If no LAN signal is input during signal standby, the monitor enters the input signal waiting mode in a low power after 3 minutes. - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 35
Operating Range for the Remote Control Point the top of the remote control toward the monitor's remote control sensor during button operation. The operation range of the remote control unit is approx. 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 36
Showing the Information OSD When the signal format changes during input switching, information such as the video input terminal, resolution information, and IP address is displayed. HDMI1 1 3840X2160@30Hz 2 SDR 3 IP ADDRESS : 192.xxx.x.xx 4 1 Input mode 2 Resolution 3 SDR / HDR information - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 37
Setting the Aspect Ratio Press the SIZE button of the remote control to change the Aspect Ratio setting between Normal, 1:1, Full, and Zoom. N OTE: This setting cannot be changed when [Media Player] is selected for the Input mode. Video signal 4444000099996666 Normal 1:1 Full Zoom The aspect - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 38
OSD (On-Screen Display) Controls The monitor features an OSD (On-Screen Display) function that allows the user to easily adjust the screen. By operating the menu displayed at the top of the screen, you will be able to adjust the brightness and the other screen settings. OSD screen structure The - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 39
more details on the content of the menu, see "OSD Controls List" (page 68). Video settings: Select one of the default picture modes, manually adjust the color settings, adjust the aspect ratio, and adjust the other settings related to the image. Audio settings: Adjust the volume, balance, equalizer - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 40
Using the Media Player Menu The Media Player plays image, video, and music files located on a USB storage device connected to the USB Type-A port of the monitor (page 19). To open the Media Player menu, press the INPUT button of the remote control and select [Media Player]. N OTE: Connect the - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 41
USB mass storage devices. • Do not use a USB hub. • Do not use a multi-partition USB storage device. • The USB Type-A port of the monitor supports 5 V / 500 mA. When using a USB device of more than 500 mA, we recommend using the AC adapter supplied with the USB device. • When connecting a USB - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 42
not play smoothly with a combination of max bit rate of video and audio. Max resolution (H x V) of image 15,360 x 8,640 pixels Max channel No. 2 ch Supported audio codec LPCM, MP3, AAC LPCM, MP3, AAC LPCM, MP3, AAC WMA 9, WMA 10 Pro N OTE: • Sometimes, it may not be possible to play a video - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 43
Chapter 5 Advanced Operation This Chapter Includes: > "Creating a Power Schedule" on page 41 > "Using Picture Modes" on page 42 > "Setting Security and Locking the Monitor Controls" on page 43 > "Locking the Button Controls" on page 44 40 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 44
Creating a Power Schedule The schedule function allows the monitor to automatically switch between power on and standby mode at different times. To program the schedule: 1. Enter the [SCHEDULE] menu in the OSD menu. a. Use the p/q buttons of the remote control to select [Current Time settings]. b - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 45
Using Picture Modes There are different picture modes available. They have been configured for different applications as described in the "Picture Mode Types" table below. To change picture modes: In the OSD menu, go the [Video] -> [Picture Mode], or press the MODE button of the remote control to - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 46
Setting Security and Locking the Monitor Controls Under normal operation, the monitor can be controlled by any person using the remote control or the monitor control panel. You can prevent unauthorized use and changes to the monitor settings by enabling the security and lock settings. The security - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 47
Locking the Button Controls The lock settings prevent the monitor from responding to button presses on the remote control or monitor control panel. When locking the button controls, some buttons can be configured to remain unlocked. Locking the Control Panel Buttons The [Key Lock Settings] prevent - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 48
Locking the Remote Control Buttons The [IR Lock Settings] prevent the monitor from being controlled using the remote control. HDMI1 Setup Input Labels Key Lock Settings IR Lock Settings LED Indicator Mute Settings ROTATE 180° Thermal Management Signal Information Off Mode 1 Mode 2 1. In the OSD - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 49
Chapter 6 External Control This Chapter Includes: > "Controlling the Monitor via RS-232C" on page 47 > "Controlling the Monitor via LAN" on page 48 > "HTTP Browser" on page 50 > "Commands" on page 52 Connecting an external device There are two options to connect an external device to control the - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 50
the monitor via commands sent from a computer connected with an RS-232C cable, use the control commands. Instructions for the control commands can be found in "Commands" in "External Control" in this manual. Computer RS-232C RS-232C Cable N OTE: • If your computer is equipped only with a 25-pin - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 51
Controlling the Monitor via LAN Connect the monitor to the network The monitor is equipped with a LAN port (RJ-45). Connecting the monitor to a network allows you to control the monitor from a computer via a network. To use a LAN connection, you are required to assign an IP address to the monitor ( - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 52
Enable TCP connection in a web browser Command access is disabled by default. Access the display in a web browser and select Enabled in TCP. 1. Check the IP address of the monitor. Press the INFORMATION button twice and check the IP address on INFORMATION 2. INFORMATION2 RS-232C/LAN %)$1$-*&/5 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 53
HTTP Browser Overview Connect the monitor with a commercially-available LAN cable to configure the LAN settings using the HTTP server function. This monitor uses "JavaScript" and "Cookies" and the browser should be set to accept these functions. Refer to the help files for the Web browser to change - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 54
DNS: Obtains the network settings from the DHCP server on the network but the DNS is set manually. N OTE: Consult your network administrator if you have any trouble with the connection. IP ADDRESS Set the IP address for the monitor connected to the network when [Off] is selected for [DHCP - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 55
, providing remote control of the monitor from a connected device. For the commands, refer to "RS-232C Command List" on page 82 of this manual. Controlling the Monitor with a computer (RS-232C) You can control this monitor from a computer via RS-232C (COM port) on the computer. Communication - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 56
other appropriate applications. Set the TCP connection to enable in a web browser. (see page 49) Read the manual for the terminal software for detailed instructions. Communication conditions Set the LAN communication settings on the computer to match the monitor's communication settings as follows - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 57
Chapter 7 Troubleshooting This Chapter Includes: > "When a problem occurs with the monitor" on page 55 > "Nothing is displayed" on page 55 > "The image is not displayed correctly" on page 56 > "An instruction or caution screen is displayed" on page 57 > "Others (when connected to a computer)" on - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 58
When a problem occurs with the monitor In such a case, refer to the connected computer or video device is turned on. The LCD panel needs to be replaced. Please contact an authorized SHARP servicing dealer or service center for assistance. P.8 P.18 P.35 P.70 P.23 P.20, P.30 P.22 P.23 * If there is - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 59
not displayed correctly. The image is not displayed correctly (problems not mentioned above) or the video is interrupted momentarily. service center for assistance. ● If the video is interrupted when an HDMI signal with the 3840 x 2160 or 4096 x 2160 resolution is input, use an HDMI cable supporting - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 60
An instruction or caution screen of the monitor since P.73 operation guaranteed temperature. this problem may cause a malfunction. Warning!! The internal temperature is on the reinstallation procedure, refer to the computer manual or the support service for the computer. Others (remote control, - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 61
colors are abnormal. Check that the external device (video player, etc.) is correctly connected and operates properly. For more information, see the manual of the external device. The power management function of the monitor may be functioning. Check that the external device is operating (playing - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 62
Chapter 8 Specifications This Chapter Includes: > "Compatible Signal List" on page 60 > "PN-HE751" on page 62 > "PN-HE651" on page 63 > "PN-HC861" on page 64 > "PN-HC751" on page 65 > "PN-HC651" on page 66 59 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 63
Compatible Signal List Resolution 640 x 480p 720 x 480i 720 x 480p 720 x 576i 720 x 576p 1280 x 720p 1280 x 720p 1920 x 1080i 1920 x 1080p 3840 x 2160p 4096 x 2160p Refresh rate (Hz) 60 60 60 50 50 50 60 50 60 24 25 30 50 60 24 25 30 50 60 24 25 30 50 60 HDMI video ● ● ● 60 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 64
Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 720 1280 x 800 1280 x 960 1280 x 1024 1400 x 1050 1440 x 900 1600 x 1200 1680 x 1050 1920 x 1080 3840 x 2160 1366 x 768 1920 x 1440 2560 x 1600 Refresh rate (Hz) 70 60 56 60 60 60 60 60 60 75 60 (RB*) 60 60 60 60 30 60 60 60 60 * RB: - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 65
PN-HE751 Size (display size) 75"/1,892.74 mm diagonal Type of LCD Active Matrix Color TFT LCD Viewable Size 1,649.664 x 927.936 mm Resolution 3,840 x 2,160 Pixel Pitch 0.43 mm (H) x 0.43 mm (V) Color Brightness Over 1073 million colors 600 cd/m2 (Max.) Frequency Horizontal Vertical 31 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 66
PN-HE651 Size (display size) 65"/1,638.96 mm diagonal Type of LCD Active Matrix Color TFT LCD Viewable Size 1,428.48 x 803.52 mm Resolution 3840 x 2160 Pixel Pitch 0.372 mm (H) x 0.372 mm (V) Color Brightness Over 1073 million colors 600 cd/m2 (Max.) Frequency Horizontal Vertical 31 - - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 67
PN-HC861 Size (display size) 86"/2,174.27 mm diagonal Type of LCD Active Matrix Color TFT LCD Viewable Size 1,895.04 x 1,065.96 mm Resolution 3840 x 2160 Pixel Pitch 0.4935 mm (H) x 0.4935 mm (V) Color Brightness Over 1073 million colors 450 cd/m2 (Max.) Frequency Horizontal Vertical - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 68
PN-HC751 Size (display size) 75"/1,892.74 mm diagonal Type of LCD Active Matrix Color TFT LCD Viewable Size 1,649.664 x 927.936 mm Resolution 3840 x 2160 Pixel Pitch 0.43 mm (H) x 0.43 mm (V) Color Brightness Over 1073 million colors 450 cd/m2 (Max.) Frequency Horizontal Vertical 31 - - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 69
PN-HC651 Size (display size) 65"/1,638.96 mm diagonal Type of LCD Active Matrix Color TFT LCD Viewable Size 1428.48 x 803.52 mm Resolution 3840 x 2160 Pixel Pitch 0.372 mm (H) x 0.372 mm (V) Color Brightness Over 1073 million colors 450 cd/m2 (Max.) Frequency Horizontal Vertical 31 - - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 70
Appendix A Trademark and Software License Microsoft and Windows are trademarks of the Microsoft group of companies. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 71
Appendix B OSD Controls List This Chapter Includes: > "Video Settings" on page 69 > "Audio Settings" on page 71 > "Setup" on page 72 > "Control Settings" on page 74 > "Media Player" on page 75 > "Schedule" on page 76 68 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 72
. Menu used to adjust detailed video settings. Select the aspect ratio of the screen image. For more information, see "Setting the Aspect Ratio" in this manual. Maximizes the size without changing the aspect ratio. Shows the image in a 1 by 1 pixel format. (If the input resolution is higher than the - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 73
Video Gamma Native 2.2 2.4 Color Enhance HDR Mode Backlight / Brightness Contrast Video Black Level Sharpness Color Tint Reset Video Settings Adjusts the brightness of gray and other intermediate colors. (SDR) Gamma correction is handled by the LCD panel. Typical monitor gamma for use with a - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 74
Audio Settings Audio Sound Mode Standard Music Movie Custom Balance Surround Internal Speakers Auto Off On Audio Input Audio Delay Reset Audio Settings Set pre-configured audio settings suitable for various environments where the monitor may be used, or customize settings to your preference. - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 75
Mode cannot be used simultaneously. The input terminal is changed manually. If the signal is lost in the input terminal being not set in [Search terminal]. This function makes it possible to control a device supporting HDMI CEC connected to the HDMI terminal. When set to On, HDMI CEC is enabled - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 76
Setup VGA Options Auto Adjust Clock Phase H.Position V.Position H.Resolution V.Resolution Reset VGA Options Other settings Input Labels Key Lock Settings IR Lock Settings LED Indicator Mute Settings ROTATE 180° Thermal Management Signal Information Monitor Information Factory Reset Enabled when a - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 77
. On: Obtains the network settings from the DHCP server on the network. Off: Sets fixed networks settings. Manual DNS: Obtain the network settings from the DHCP server on the network but the DNS is set manually. Set the IP address of the monitor when [DHCP] is set to [Off]. Set the subnet - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 78
simultaneously. Select [Execute] before removing the USB device. Sets whether to display a caution window (On) or not (Off) when a file with a format or a codec not supported by the monitor is played. 75 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 79
Schedule Schedule Sleep Timer Current Time settings Schedule settings Sets the time until the monitor turns off automatically. Off, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes, 120 minutes, 180 minutes, 240 minutes can be selected. Sets the current time. N OTE: • If the monitor - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 80
Appendix C Others This Chapter Includes: > "RS-232C command table" on page 78 > "Intellectual Property Rights and Other Matters" on page 80 77 - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 81
RS-232C command table How to read the command table Command: Command field Direction: W When the "Parameter" is set in the parameter field, the command functions as described under "Control/ Response Contents". R The returned value indicated under "Reply" can be obtained by setting "????" or - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 82
SETUP menu Function TIME SETTING User name Password SENSOR SETTING Model Serial no. Key Lock Settings IR Lock Settings ALL RESET Others Function VOLUME MUTE AUDIO Temperature sensor Temperature acquisition Check the resolution Command DATE USER Direction WR WR PASS WR STDR WR INF1 R SRNO R ALCM - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 83
Intellectual Property Rights and Other Matters Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. This product makes use of - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 84
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 85
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 86
T he limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. T his document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL - NEC PN-HE751 | PN-HC/HE Series Operation Manual - Page 87
PN-HE751-HE651-HC861-HC751-HC651 Mu EN22C(1)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
 |
 |
OPERATION MANUAL
LCD MONITOR
MODEL:
PN-HE751
PN-HE651
PN-HC861
PN-HC751
PN-HC651