NEC PN-HY501 PN-HS and PN-HY Series Operation Manual
NEC PN-HY501 Manual
 |
View all NEC PN-HY501 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC PN-HY501 manual content summary:
- NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 1
PN-HS551 PN-HS501 PN-HS431 PN-HY551 PN-HY501 PN-HY431 LCD MONITOR OPERATION MANUAL - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 3
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 4
safety and many years of trouble-free operation of your service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 5
spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • sides of the batteries according to the instructions in the compartment. • Do not mix reaction control in nuclear facility, medical life support system, and missile launch control in a weapon - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 6
TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor attempt to repair the power cord if it is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - M icrosoft and Windows are either registered trademarks or trademarks of Microsoft - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 7
MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 8
RS-232C command table 29 Controlling the Monitor with a computer (LAN)...........31 Command-based control 31 Troubleshooting 32 Specifications 33 Mounting Precautions (For SHARP dealers and service engineers 37 Supplied Components If any component should be missing, please contact your dealer - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 9
Part Names nFront view 1 nRear view 19 18 19 12 13 14 15 16 2 1. LCD panel 2. Power LED (See page 15.) / Remote control sensor (See page 14.) 3. AC input terminal (See page 12.) 4. Main power switch (See page 15.) 5. RS-232C input terminal (See page 11.) 6. IR output terminal (See page 11.) - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 10
disconnecting cables. Also, read the manual of the equipment to be connected. may cause malfunctions and the other problems. • Do not use any cable Turn off the power of the monitor when removing a USB flash drive. Supported USB flash drives File System FAT32 NTFS Capacity Up to 32 GB.* Up - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 11
8. RS-232C input terminal • You can control the monitor from a computer by connecting a commercially available RS-232 straight cable between this terminal and the computer. 9. LAN terminal • You can control the monitor from a computer on a network by connecting a commercially available LAN cable - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 12
Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the power outlet. AC input terminal Main power switch 2 1 3 For power - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 13
Attaching the USB flash drive cover 1. Insert the USB flash drive into the USB port. USB port 2. A ttach the USB flash drive cover and secure with the provided screws (x2). Screw TIPS • If the USB flash drive cover will be attached, use a USB flash drive with dimensions no greater than 1-15/16 - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 14
an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. Remote control sensor 2. See the instructions in the compartment and put in the batteries (R03 or LR03 ("AAA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 15
Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning on the main power - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 16
Turning Power On/Off nPower save mode When the monitor is turned on for the first time after being shipped from the factory, the power save mode setting screen will be displayed. Set it to YES or NO. YES POWER SAVE MODE is set to ON. Standby state is standby mode. Current consumption is reduced - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 17
Basic Operation 11 1 12 13 2 3 14 4 15 5 16 6 17 7 18 8 19 9 20 10 1. HDMI Switch the input mode to HDMI1, HDMI2 or HDMI3. 2. Numeric input buttons These buttons are used for setting such as LAN setting. 3. MUTE Turns off the volume temporarily. Press the MUTE button again to - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 18
Basic Operation 16. BRIGHT +/- (Brightness adjustment) Press + or - to adjust the brightness. 17. INPUT (Input mode selection) The menu is displayed. Press the or button to select the input mode, and press the ENTER button to enter. * You can change the input mode by pressing the INPUT button of - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 19
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE Displays image so it fills the entire screen. ZOOM NORMAL The image is enlarged to fill the entire screen without changing the aspect ratio. The - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 20
flash drive connected to the monitor. You can also play Music file during Photo file display. For information on USB flash drive, see page 10. n Supported formats The types of files that can be played are as follows. The operation of formats not indicated in the table is not guaranteed. Photo - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 21
Using Media Player Operations during play When playback starts, you can display the operation bar in the bottom of the screen by pressing the CONTENT MENU button. You can perform the actions below while the operation bar is displayed. Play / Pause Play the current file./ Pause the playing file. - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 22
50 50 50 50 30 1 Name of the menu 2 An item being selected (highlighted) TIPS • Items that cannot be selected appear in gray. (e.g. Function not supported by the current input signal) E 22 - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 23
Menu Items Menu item details The menu will differ depending on the input mode. nPICTURE COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. (See page 17 for details.) ADVANCED SIZE This is the same setting as when SIZE button - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 24
the HDMI CEC function. If the device connected to the HDMI input terminal supports CEC, the input mode of the monitor changes to HDMI when playback starts the HDMI input terminal. MODE1 ...... Normally used. This will support most common color spaces and other encoding signals. MODE2 ...... Use - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 25
Menu Items SCREEN AUTO (D-SUB) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing the ENTER button performs adjustment. Use this automatic adjustment when you use the D-SUB to display a computer screen for the first time or when you change the setting of the computer. (See page - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 26
Menu Items MONITOR BUTTONS LOCK You can disable the monitor buttons. To disable MONITOR BUTTONS LOCK, press the FUNCTION button and then press the , , and buttons in this sequence. REMOTE CONTROL LOCK You can disable the remote control unit buttons. UNLOCKED Enable the remote control unit - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 27
screen. TIPS • If the screen cannot be adjusted properly with one automatic adjustment, repeat the automatic adjustment two or three times. Try manual adjustment if necessary. nScreen display for adjustment Before making adjustments in the SCREEN menu or PICTURE menu, display an image to brighten - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 28
Controlling the Monitor with a computer (RS-232C) You can control this monitor from a computer via RS-232C (COM port) on the computer. TIPS • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C. (See page 24.) • You cannot use RS-232C and LAN control simultaneously. Computer - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 29
Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 28.) W When the "Parameter" is set in the parameter field (see page 28), the command functions as described under "Control/ - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 30
Controlling the Monitor with a computer (RS-232C) Others Function VOLUME MUTE AUDIO Temperature sensor Temperature acquisition Check the resolution Command Direction VOLM WR MUTE WR DSTA R Parameter 0-31 0-1 ERRT R PXCK R Reply Control/Response contents * 0-31 - 0-1 0: OFF, 1: ON 0 - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 31
can control the monitor using RS-232C commands (see page 29) via terminal software and other appropriate applications. Read the manual for the terminal software for detailed instructions. (1) Connect the computer to the monitor. 1. Specify the IP address and data port number (10008) and connect the - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 32
If you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no the HDMI input terminal does not appear properly. • Does the HDMI cable support 4K, and is it HDMI standard compliant? The monitor will not work with - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 33
Specifications nProduct Specifications Model PN-HS551 PN-HY551 PN-HS501 PN-HY501 PN-HS431 PN-HY431 LCD component 55" Class [54-5/8 inch (138.783 cm) diagonal] TFT LCD 50" Class [49-1/2 inch (125.730 cm) diagonal] TFT LCD 43" Class [42-1/2 inch (107.986 cm) diagonal] TFT LCD Max. resolution - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 34
Specifications nDimensional Drawings Note that the values shown are approximate values. [PN-HS551/PN-HY551] 2-1/2 [63.5] 48-7/8 [1241.8] Screw holes for mounting brackets 7-7/8 [200] 7-7/8 [200] 9/16 [13.9] 9/16 [13.9] Unit: inch [mm] 9/16 [13.9] 7-7/8 [200] 28-1/16 [712.6] 7-7/8 [200] - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 35
it has been configured to detect plug-and-play monitors. There are several types of DDC, depending on the communication method used. This monitor supports DDC2B. nCompatible signal timing (PC) Screen resolution VESA 640 × 480 800 × 600 848 × 480 1024 × 768 1280 × 800 1280 × 960 1280 × 1024 Wide - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 36
Specifications nCompatible signal timing (AV) Screen resolution 4096 × 2160p 3840 × 2160p 1920 × 1080p 1920 × 1080i 1280 × 720p 720 × 576p 720 × 480p 640 × 480p(VGA) 720(1440) × 576i 720(1440) × 480i Frequency 24Hz 25Hz 30Hz 50Hz 59.94Hz 60Hz 24Hz 25Hz 30Hz 50Hz 59.94Hz 60Hz 24Hz 50Hz 59.94Hz - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 37
Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. • Be sure to use a wall-mount bracket - NEC PN-HY501 | PN-HS and PN-HY Series Operation Manual - Page 38
PN-HS551-HS501-HS431-HY551-HY501-HY431 Mu EN21L(1)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
PN-HS551
PN-HS501
PN-HS431
PN-HY551
PN-HY501
PN-HY431
LCD MONITOR
OPERATION MANUAL