NEC PN-L652B Operation Manual

NEC PN-L652B Manual

Get NEC PN-L652B PDF manuals and user guides View all NEC PN-L652B manuals
Add to My Manuals
Save this manual to your list of manuals

NEC PN-L652B manual content summary:

  • NEC PN-L652B | Operation Manual - Page 1
    PN-L862B PN-L752B PN-L652B LCD MONITOR OPERATION MANUAL
  • NEC PN-L652B | Operation Manual - Page 2
    IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY
  • NEC PN-L652B | Operation Manual - Page 3
    user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
  • NEC PN-L652B | Operation Manual - Page 4
    safety and many years of trouble-free operation of your service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual
  • NEC PN-L652B | Operation Manual - Page 5
    spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • (-) sides of the batteries according to the instructions in the compartment. • Do not mix old reaction control in nuclear facility, medical life support system, and missile launch control in a
  • NEC PN-L652B | Operation Manual - Page 6
    TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in service representative. Network - When you use a network, your communication data is exposed to the risks of being stolen or illegally accessed. To avoid these risks, you need to use this monitor in a secure network environment. Manual
  • NEC PN-L652B | Operation Manual - Page 7
    MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work
  • NEC PN-L652B | Operation Manual - Page 8
    DEAR SHARP CUSTOMER 4 SAFETY PRECAUTIONS 4 TIPS AND SAFETY INSTRUCTIONS 6 MOUNTING PRECAUTIONS 7 Supplied Components 9 System Requirements 9 51 Communication procedure 51 RS-232C command table 53 Troubleshooting 55 Specifications 57 Intellectual Property Rights and Other Matters
  • NEC PN-L652B | Operation Manual - Page 9
    ! Do not dispose of batteries in household waste. Follow the disposal instructions for your area. System Requirements Hardware Operating system Must have a USB of the software programs. To install the software, see the manual for each. Pen Software setup program and Touch Viewer setup program
  • NEC PN-L652B | Operation Manual - Page 10
    Part Names nFront view nRear view 21 5 22 5 4 6 7 8 9 4 10 11 3 1 2 ** 3 12 13 1415 16 17 18 19 20 1. POWER button / Power LED (See page 18.) 2. Remote control sensor (See page 15.) 3. USB port (USB 3.0 compliant) (See page 13.) 4. Speakers 5. Infrared transmitter/receiver 6.
  • NEC PN-L652B | Operation Manual - Page 11
    nRemote control unit 1 2 Part Names 1. Signal transmitter 2. Operation buttons (See page 24.) 11 E
  • NEC PN-L652B | Operation Manual - Page 12
    connecting/ disconnecting cables. Also, read the manual of the equipment to be connected. • output terminals may cause malfunctions and the other problems. • Do not use any cable that has the TOUCH PANEL terminal. 1. HDMI1 input terminal (support HDMI CEC) 2. HDMI2 input terminal 3. HDMI3 input
  • NEC PN-L652B | Operation Manual - Page 13
    device, keyboard, mouse) that you want to use in "APPLICATION" mode. Supported USB flash drives File System Capacity FAT32/NTFS (Read only) Up to 64 • To remove a USB flash drive connected to a computer, refer to the manual of the computer. Caution • Do not switch the input mode when a USB flash
  • NEC PN-L652B | Operation Manual - Page 14
    Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the power outlet. AC input terminal 2 Main power switch 1 Power cord (
  • NEC PN-L652B | Operation Manual - Page 15
    . 16.4 feet (5 m) at an angle of approx 10° from the center to the top/ bottom/right/left of the remote control sensor. 2. See the instructions in the compartment and put in the batteries (R03 or LR03 ("AAA" size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover
  • NEC PN-L652B | Operation Manual - Page 16
    Mounting a web camera It is possible to mount the PN-ZCMS1 Video-Conferencing Soundbar (optional) or a commercially available web camera. 1 3 1. Remove the screws from this monitor. 2. Attach the camera mount (supplied) with the camera mount screw (M3 x 10) (supplied) (x2). 3. Attach the web
  • NEC PN-L652B | Operation Manual - Page 17
    Attaching the wireless adapter 1 2 * Wireless adapter 1. Remove the bottom cover. 2. Attach a wireless adapter. Take note of the direction of the wireless adapter. The surface with the * mark is the front. TIPS • Store the removed cover and screws. After removing the wireless adapter, put back
  • NEC PN-L652B | Operation Manual - Page 18
    Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning power on 1. Press the
  • NEC PN-L652B | Operation Manual - Page 19
    Turning Power On/Off n Operations after first power-on When you turn on the power for the first time, the language settings screen appears. 1. Select a language, and then touch "Next". The "Date & Time Settings" screen appears. 2. Set the date and time, and then touch "Next". The power save mode
  • NEC PN-L652B | Operation Manual - Page 20
    Touch Pen Pen tip (thick) Pen tip (thin) The following software recognizes the side of the touch pen that is touching the screen, enabling the two sides to be used as different pens. • Whiteboard For details on how to use the touch pen in Whiteboard, refer to "Whiteboard" (see page 29). TIPS • In
  • NEC PN-L652B | Operation Manual - Page 21
    different. For details, check operating system Help and the application's support documentation. TIPS • On the Mac, the actions are the for using the touch pen in the Pen Software, see the Pen Software Operation Manual. • The screen may not respond correctly in the following cases: - Touch gesture
  • NEC PN-L652B | Operation Manual - Page 22
    Basic Operation About the home screen of APPLICATION mode This appears when the input mode is changed to APPLICATION. (6) (5) (2) (2) (1) (2) (3) (4) (1) Start "Whiteboard". (See page 29.) Start "Bytello Share". (See page 35.) Start "Web Browser". (See page 40.) Start "File Explorer".
  • NEC PN-L652B | Operation Manual - Page 23
    convenience into the workplace. Have a smooth meeting. Share or print information right where it's needed. For details on Synappx, see the Synappx manual. n List display of startup applications (recent app bars) When you touch on the toolbar in APPLICATION mode, a preview of the application being
  • NEC PN-L652B | Operation Manual - Page 24
    Basic Operation Using the remote control unit 11 1 12 13 2 3 14 4 15 5 16 6 17 7 18 8 19 9 20 10 5. VOLUME +/- (Volume adjustment) Press + or - to adjust the volume. 6. INFORMATION Displays monitor information. XXXXXXXX X.X.X XXXXXXXX XXXX-XXXXXX-XX-XXXX XXX.XXX.XXX.XXX XXX.XXX.
  • NEC PN-L652B | Operation Manual - Page 25
    If "HDMI CEC Link" is set to on, you can operate devices that support HDMI CEC when the input mode is HDMI1. CONTENT MENU button • When input "HDMI CEC Link" is set to on and input mode is HDMI1 - Operate devices that support HDMI CEC. • When "HDMI CEC Link" is set to off and input mode is other
  • NEC PN-L652B | Operation Manual - Page 26
    Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. Wide Displays image so it fills the entire screen. Normal Displays the image so it fills the screen without changing the aspect ratio. Dot by Dot
  • NEC PN-L652B | Operation Manual - Page 27
    Overlay board (Mark) You can draw characters or lines on the images being displayed on this monitor. Touch on the toolbar. Basic Operation Operation bar Tool Pen Brush Clean Save Close Function Draw a line. You can change the settings (color). Draws a line without hiding objects under the line.
  • NEC PN-L652B | Operation Manual - Page 28
    Basic Operation Freeze Freezes the video shown on the monitor. Either press the FREEZE button on the remote control unit, or touch on the toolbar. In the case of a still image, is displayed at the top right of the screen. Settings window Settings window: Touch to operate. Magnify any location on the
  • NEC PN-L652B | Operation Manual - Page 29
    Whiteboard • You can write letters or draw lines on the screen as a whiteboard. • You can print or save content written on the screen. • You can display an image or PDF file, and write/draw letters and lines on the image. • In this application, the data of one screen is referred to as a "sheet".
  • NEC PN-L652B | Operation Manual - Page 30
    Whiteboard n Function list Tool Draw lines. (See page 31.) Erase a line that you drew. (See page 31.) Function Pen palette 1 Pen palette 2 Pen palette 3 This appears when "Draw with pen and finger" is selected. (See page 34.) Touch to perform gesture actions (enlarging/reducing, moving a sheet
  • NEC PN-L652B | Operation Manual - Page 31
    Whiteboard Drawing The line/eraser setting is assigned to each touch pen (thin/thick) and finger. Operate with what you use to draw. 1. Touch one of "Pen palette 1" to "Pen palette 3". If the line you want to draw does not exist, touch one of "Pen palette 1" to "Pen palette 3" twice. You can change
  • NEC PN-L652B | Operation Manual - Page 32
    from the current sheet. • Depending on memory usage and other factors, it may not be possible to open a file even if it is in a supported format. 1. Touch , . 2. Touch "Insert a PDF or an image to background". 3. Select the file. Opening a file Data of this application that is saved in dedicated
  • NEC PN-L652B | Operation Manual - Page 33
    Whiteboard Saving a sheet You can save a sheet in dedicated SDSW format or PDF format. You can save the sheet to this monitor's built-in memory (internal memory) or to a USB flash drive. TIPS • When you save a sheet in SDSW format, you can open the sheet in this application and re-edit the sheet. •
  • NEC PN-L652B | Operation Manual - Page 34
    Whiteboard Settings n Drawing with your finger (Draw with pen and finger) / Drawing with only a touch pen (Draw only with pen) 1. Touch . 2. To draw with your finger: Touch "Draw with pen and finger". You can now draw with a touch pen and your finger. Touch before performing a gesture. The button
  • NEC PN-L652B | Operation Manual - Page 35
    on the toolbar. Connection code Display the user guide. n Preparing the device • You must connect to the Internet. • Access the URL specified in "User Guide", and the download and install the application. this monitor, and start the application. (This monitor does not support 9-digit codes.) 35 E
  • NEC PN-L652B | Operation Manual - Page 36
    connection of this monitor. Permissions Mode Sets whether or not to confirm on this monitor when the device transmits a screen. Support Chromecast device Support iOS device Support Miracast device* Turn ON to use. Device Name Changes the name of this monitor displayed on the device that transmits or
  • NEC PN-L652B | Operation Manual - Page 37
    PDF Viewer Starts when a PDF file is opened on an application such as "File Explorer", etc. (3) (2) (1) (1) Displays the PDF. Zoom-in or zoom-out the display by pinching. Magnify the display by double-tap. : Displays the current page / total number of pages. : Performs printing. (2) Close /
  • NEC PN-L652B | Operation Manual - Page 38
    File Explorer Manages the files and folders in the internal storage and the USB flash drive connected to the monitor. You can also display or play back the files. 1. On the home screen of APPLICATION mode, touch "File Explorer". Select the device to display. n Creating a new folder 1. Touch "Create
  • NEC PN-L652B | Operation Manual - Page 39
    be played are as follows. Image files Extension Max. resolution *.bmp *.jpg (*.jpeg) 3840x2160 *.png • Progressive JPEG files are not supported. Music files Extension Audio coding *.mp3 MPEG1/2 layer3 Sample rate 8kHz - 48kHz Bit rate 8kbps - 320kbps Video files Extension *.mkv *.mp4
  • NEC PN-L652B | Operation Manual - Page 40
    Web Browser Browses the home page. 1. On the home screen of APPLICATION mode, touch "Web Browser". Exiting Close the Web Browser from the recent app bar. TIPS • If a large-sized website is displayed, the Web Browser may close. Caution • Take proper care when browsing websites. In a malicious website
  • NEC PN-L652B | Operation Manual - Page 41
    Updating the Software (Update) Update applications that are factory-installed in APPLICATION mode. (A network environment that allows access to the internet is required.) On the home screen of APPLICATION mode, touch "All Apps", and then touch "Updater". When you use Updater, a password is required.
  • NEC PN-L652B | Operation Manual - Page 42
    Common Settings Menu Displaying the menu screen Adjusts the images and sound. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. n Example of operation 1. On the home screen of APPLICATION mode, select "Common Settings". Or
  • NEC PN-L652B | Operation Manual - Page 43
    Common Settings Menu n Screen H Position (D-SUB) Adjust the horizontal position of the image. V Position (D-SUB) Adjust the vertical position of the image. Clock (D-SUB) Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. When
  • NEC PN-L652B | Operation Manual - Page 44
    screen. TIPS • If the screen cannot be adjusted properly with one automatic adjustment, repeat the automatic adjustment two or three times. Try manual adjustment if necessary. nScreen display for adjustment Before making adjustments in the Screen menu or Picture menu, display an image to brighten
  • NEC PN-L652B | Operation Manual - Page 45
    Administrator Settings Menu Displaying the menu screen Makes settings for this monitor. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. Touch to operate. 1. On the home screen of APPLICATION mode, touch "Administrator
  • NEC PN-L652B | Operation Manual - Page 46
    Administrator Settings Menu Menu item details n Setup Monitor Lock Admin Password Sets whether or not a password is necessary when using "Administrator Settings", "FUNCTION", and "Updater". Power Save Mode When set to off, startup time from standby state is reduced. Note, however, that more power
  • NEC PN-L652B | Operation Manual - Page 47
    Modes "HDMI Modes" settings change how the content displayed is processed and decoded using the HDMI input terminal. Mode1 Normally used. This will support most common color spaces and other encoding signals. Mode2 Used when proper display cannot be performed in "Mode1", such as when a device that
  • NEC PN-L652B | Operation Manual - Page 48
    Administrator Settings Menu Language & Keyboard Language Sets the display language for the screen. Virtual Keyboard Selects the keyboard to display on the screen. Physical Keyboard Displays information about the physical keyboard used. Current Keyboard Sets the language for the physical keyboard
  • NEC PN-L652B | Operation Manual - Page 49
    nSchedule You can set the time to switch the monitor on and off. Set this function with "Startup & Shutdown" in the System menu. (See page 48.) Administrator Settings Menu 1. To turn the power ON at the specified time, touch "Add Power On Schedule". To turn the power OFF at the specified time,
  • NEC PN-L652B | Operation Manual - Page 50
    Reset/Functional Restriction Setting (FUNCTION Menu) You can reset the settings to the factory default settings or restrict operations. When you use FUNCTION menu, a password is required. (Factory setting) (See page 45.) Perform the operation from the remote control unit. 1. Press the FUNCTION
  • NEC PN-L652B | Operation Manual - Page 51
    Controlling the Monitor with a computer (RS-232C) You can control this monitor from a computer via RS-232C (COM port) on the computer. Computer connection Connect with RS-232 straight cable between the computer's COM port (RS-232C connector) and the RS-232C input terminal on the monitor. Computer
  • NEC PN-L652B | Operation Manual - Page 52
    Controlling the Monitor with a computer (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. When a command has not been executed E R R Return code (0DH, 0AH) TIPS • "ERR" is returned when
  • NEC PN-L652B | Operation Manual - Page 53
    Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 51.) W When the "Parameter" is set in the parameter field (see page 51), the command functions as described under "Control/
  • NEC PN-L652B | Operation Manual - Page 54
    Controlling the Monitor with a computer (RS-232C) Function menu Function Monitor Lock Remote Control Lock All Reset Command Direction Parameter Reply Control/Response contents * ALCM WR 0-3 0-3 0: Off, 1: Power Button & Touch, 2: Power Button, 3: Touch ALCR WR 0-2 0-2 0: Off, 1: All, 2:
  • NEC PN-L652B | Operation Manual - Page 55
    you are experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is HDMI1 input terminal? HDMI2 input terminal and HDMI3 input terminal are not supported. • When the input mode is APPLICATION, these buttons operate the application
  • NEC PN-L652B | Operation Manual - Page 56
    Troubleshooting The response of the touch panel is brightness of the backlight decreases automatically in order to prevent high-temperaturerelated problems. When this occurs, "TEMPERATURE" is displayed on the screen and Bluetooth headset cannot be used. This monitor does not support HSP/HFP. E 56
  • NEC PN-L652B | Operation Manual - Page 57
    x 1 10 BASE-T/100 BASE-TX/1000 BASE-T Android 9.0 Arm Cortex-A73 processor (Quad-Core) 4GB 32GB IEEE802.11ax/ac/n/a/g/b compliant 5.0 compliant Supported protocols: A2DP, AVRCP, GATT, HID 20 V, 3.25 A (power supplied when expanding the functions with an optional part) 10 W + 10 W Infrared
  • NEC PN-L652B | Operation Manual - Page 58
    Specifications nDimensional Drawings Note that the values shown are approximate values. [PN-L862B] 77-1/16 [1957] Screw holes for mounting brackets 31-1/2 [800] Unit: inch [mm] 11-3/8 [288.8] 9/16 [14.6] 23-5/8 [600] 45-5/8 [1159.5] 9/16 [14.6] 9/16 [14.6] 10-11/16 [270.8] 1-11/16 [43.5]
  • NEC PN-L652B | Operation Manual - Page 59
    Specifications nCompatible signal timing (PC) Screen resolution Hsync Vsync Dot frequency VESA Wide US TEXT 640 × 480 800 × 600 1024 × 768 1280 × 960 1280 × 1024 1360 × 768 1440 × 900 1680 × 1050 1280 × 720 1920 × 1080 3840 × 2160 4096 × 2160 720 × 400 31.5kHz 37.9kHz 48.4kHz 60.0kHz 64.0kHz
  • NEC PN-L652B | Operation Manual - Page 60
    Yes Yes Yes Yes Yes Yes Yes Yes Yes nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect plug-and-play monitors.
  • NEC PN-L652B | Operation Manual - Page 61
    Specifications nChannels that can be used in wireless LAN Standard IEEE802.11ax/n/g/b IEEE802.11ax/ac/n/a Channel 1-11ch 36/40/44/48ch 52/56/60/64ch 100/104/108/112/116ch 132/136/140ch 149/153/157/161ch 165ch Frequency band (center frequency) 2412-2462MHz 5180-5240MHz 5260-5320MHz 5500-5580MHz
  • NEC PN-L652B | Operation Manual - Page 62
    source software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website: https://jp.sharp/business/lcd-display/support/download/source_e.html We are unable to answer any questions about the source code for the open source software. The source code for
  • NEC PN-L652B | Operation Manual - Page 63
    Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people. (PN-L652B: at least 2 people.) • Be sure
  • NEC PN-L652B | Operation Manual - Page 64
    PN-L862B-L752B-L652B Mu EN22B(3)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
PN-L862B
PN-L752B
PN-L652B
LCD MONITOR
OPERATION MANUAL