NEC S401 S401 : user's manual
NEC S401 Manual
 |
UPC - 805736032222
View all NEC S401 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC S401 manual content summary:
- NEC S401 | S401 : user's manual - Page 1
User's Manual MultiSync S401 MultiSync S461 - NEC S401 | S401 : user's manual - Page 2
DISPLAY PROTECTION ...English-24 ADVANCED OPTION ...English-24 Remote Control Function ...English-27 Controlling the LCD monitor via RS-232C Remote Control English-29 Controlling the LCD monitor via LAN Control English-30 Features ...English-33 Troubleshooting ...English-34 Specifications - S401 - NEC S401 | S401 : user's manual - Page 3
Tel. No.: NEC Display Solutions of America, Inc. 500 Park Boulevard attached specified cables with the MultiSync S401 (L408N5)/MultiSync S461 (L468N6) in accordance with the instructions, may cause harmful interference to Identify and Resolve Radio-TV Interference Problems." This booklet is available - NEC S401 | S401 : user's manual - Page 4
COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION S401 (L408N5)/MultiSync S461 (L468N6) are in compliance with Council Directive 2006/95/EC: - EN 60950-1 Council Directive 2004/108/EC: - EN 55022 - EN 61000-3-2 - EN 61000-3-3 - EN 55024 and marked with NEC Display - NEC S401 | S401 : user's manual - Page 5
instructions. displaying TV* • Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. Cleaning the LCD Panel • When the liquid crystal panel - NEC S401 | S401 : user's manual - Page 6
Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Power cord*1 • Video Signal Cable • Wireless Remote Control and AA Batteries • Cable cover • Setup Manual • Clamp x 3 • Screw (M4 x 10) x 9 • CD-ROM • Thumbscrew for optional stand x 2*2 Video Signal Cable ( - NEC S401 | S401 : user's manual - Page 7
for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC instructions included with the mounting equipment for detailed information. LED Indicator Mounting location • The ceiling and wall must be strong enough to support - NEC S401 | S401 : user's manual - Page 8
avoid tipping monitor when attaching accessories. VESA Mounting Interface b. Prevent Tipping When using the display with the optional table top stand, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the - NEC S401 | S401 : user's manual - Page 9
Control Panel POWER /HD1], [DVD/HD2], [SCART], [VIDEO1], [VIDEO2], [S-VIDEO] or [TV]*). These are available input only, shown as their factory preset name. PLUS button selected in "POWER INDICATOR" (see page 23), LED will not light when the LCD monitor is in active mode. AMBIENT LIGHT SENSOR Detects - NEC S401 | S401 : user's manual - Page 10
Panel computer or HDTV device having a digital RGB output. * This connector does not support analog input. VGA IN (mini D-Sub 15 pin) To input analog RGB signals the audio signal from the AUDIO IN 1, 2, 3, DPORT, HDMI, and TV jack to an external device (stereo receiver, amplifier, etc.). EXTERNAL CONTROL - NEC S401 | S401 : user's manual - Page 11
English Kensington Lock For security and theft prevention. EXTERNAL SPEAKER TERMINAL To output the audio signal from AUDIO 1, 2, 3, DPORT, HDMI and TV jack. Note: This speaker terminal is for 15W + 15W (8 ohm) speaker. Option board slot Slot for board accessories. Please contact your supplier for - NEC S401 | S401 : user's manual - Page 12
to set and change passwords, change channel and set REMOTE ID. ENT button* DISPLAY button Turns on/off the information OSD. See page 18. MENU button Turns button Increases or decreases audio output level. CH UP/DOWN button* GUIDE button* MUTE button Turns on/off mute function. STILL button ON - NEC S401 | S401 : user's manual - Page 13
[IN2], [IN3], [HDMI], [DPORT], [TV]*1, [OPTION]*1. button Activates closed captioning. Note: board you use. Refer to the option board's manual for further information. *1: The product you purchased the top of the remote control toward the LCD monitor's remote sensor during button operation. Use the - NEC S401 | S401 : user's manual - Page 14
LCD monitor so as not to scratch the panel. 2. Install the remote control batteries The remote control is powered by two 1.5V AA batteries. To install or replace batteries: NEC before making connections. • Refer to your equipment user manual for further information. NOTE: Do not connect/disconnect - NEC S401 | S401 : user's manual - Page 15
source. 8. Adjust the sound Make volume adjustments when required. 9. Adjust the screen (See pages 20 and 21) Make adjustments of the screen display position when necessary. 10. Adjust the image (See page 20) Make adjustments such as brightness or contrast when required. 11. Recommended Adjustments - NEC S401 | S401 : user's manual - Page 16
the sound. Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram DVD player with HDMI out DVD player Stereo Amplifier Second monitor* Computer (Analog - NEC S401 | S401 : user's manual - Page 17
162MHz may not display an image correctly. Your LCD monitor displays proper image by adjusting to your Macintosh's owner's manual for more information about your the signal to appear. • PC-DVI signals are not supported. Connecting a Computer with DisplayPort • Please use DisplayPort cable with - NEC S401 | S401 : user's manual - Page 18
Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while up the monitor using the remote control or the Power Button on the front of the LCD. OFF ON Main Power Switch Power Button Using the remote control English-16 - NEC S401 | S401 : user's manual - Page 19
failure) Red Blinking (See Troubleshooting page 34) *1 When in selected in POWER INDICATOR (page 23), the LED will not light when the LCD monitor is in active mode. *3 " LCD monitor follows the VESA approved DPM Display SCART, VIDEO1, VIDEO2, S-VIDEO, TV* FULL WIDE ZOOM NORMAL Aspect ratio - NEC S401 | S401 : user's manual - Page 20
: Monitor ID, Input Source, Picture Size, etc. Press the DISPLAY button on the remote to bring up the Information OSD. ID number DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHT AMBIENT Mode The brightness of the LCD screen can be set to increase or decrease - NEC S401 | S401 : user's manual - Page 21
English OSD (On-Screen-Display) Controls NOTE: Some FOR SAVING THE ENVIRONMENT. CARBON FOOTPRINT 86.0 % Goto Adjustment Return Close Adjustment Settings Key Guide Press UP or DOWN button to select sub-menu. Press SET. Press UP or DOWN button to select. Control Panel OSD screen English-19 - NEC S401 | S401 : user's manual - Page 22
: The sRGB picture mode is standard and cannot be changed. Gamma correction is handled by the LCD panel. NATIVE*2 (except sRGB setting) 2.2 Typical display gamma for use with a PC. 2.4 Good for video (TV, DVD, etc.) S GAMMA Special gamma for certain types of movies. Raises the dark parts and - NEC S401 | S401 : user's manual - Page 23
HV inputs only If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. HD2, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only OFF All inputs, except TV* Selecting "OFF" will display the image in a 1 by 1 pixel format. (If the input - NEC S401 | S401 : user's manual - Page 24
choices are 10-240 seconds. Determines the location where the OSD appears on the screen. Selects whether the information OSD is displayed or not. The information OSD will be displayed when the input signal or source changes. The information OSD will also give a warning when there is no-signal or the - NEC S401 | S401 : user's manual - Page 25
ON or OFF the LED located at the front of the monitor. If "OFF" is selected, LED will not light when the LCD monitor is in active this item, copy to all input teminals. Default is off. MULTI DISPLAY RESET Resets "MULTI DISPLAY" options back to factory settings. English-23 TYPE2 LANDSCAPE OFF - 1 - NEC S401 | S401 : user's manual - Page 26
DISPLAY PROTECTION menu back to factory setting: - RESET POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR, AUTO BRIGHTNESS, DDC/CI. ADVANCED OPTION INPUT DETECT All inputs except for TV input. NORMAL LONG CABLE COMP Manually compensates for image degradation caused from - NEC S401 | S401 : user's manual - Page 27
Some video formats may require different scanning modes in order to best display the image. HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only OVER SCAN Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the image will - NEC S401 | S401 : user's manual - Page 28
to erase the image. As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at persistence. For long life use as Public Display Image Sticking of LCD Panel When an LCD panel is operated continuously for long hours, a trace - NEC S401 | S401 : user's manual - Page 29
their respective MONITOR ID number in red. If the MONITOR ID number is shown in white on the display, the MONITOR ID number and the REMOTE CONTROL ID are not the same. This LCD monitor can be controlled via personal computer or wireless remote control using an RS-232C connection. MONITOR ID - NEC S401 | S401 : user's manual - Page 30
the "PRIMARY" monitor. The "MENU OSD" will appear on the selected target monitor. NOTE: If the "ID No." mode select OSD is showing, press the "DISPLAY" button on the remote control while pointing at the "PRIMARY" monitor to clear this OSD. HINT: If you lost control due to the incorrect setting - NEC S401 | S401 : user's manual - Page 31
by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC MultiSync MultiSync PC (Out) IN OUT RS-232C (IN) RS-232C ( the control command. Instructions for the control command can be found on the CD included with the display. The file is - NEC S401 | S401 : user's manual - Page 32
+F5 keys to refresh your web browser (or clear the cache). The display or button's response can be slowed down or operation may not be accepted of your network. Should this happen, consult your network administrator. The LCD monitor may not respond if its buttons are repeatedly pressed in rapid - NEC S401 | S401 : user's manual - Page 33
, it is possible that items that have actually been set will not be displayed depending on the effectiveness of the cache, and the contents set from the the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address - NEC S401 | S401 : user's manual - Page 34
the above settings. EXECUTE Click this button to send a test mail to check if your settings are correct. STATUS A reply to a test mail will be displayed. NOTE: • If you execute a test, you may not receive an Alert mail. Should this happen, check if the network settings are correct. • If you - NEC S401 | S401 : user's manual - Page 35
FDMIv1) Mounting Interface: Allows users to connect their LCD monitor to any VESA standard (FDMIv1) third an arm using any third party compliant device. NEC recommends using mounting interface that comply with TÜV-GS and P&D. The DVI interface of this display supports HDCP. TILE MATRIX, TILE COMP: - NEC S401 | S401 : user's manual - Page 36
to see that the power indicator option in the OSD is set to ON. RED LED on monitor is blinking • A certain failure might have occurred, please contact your nearest authorized NEC DISPLAY SOLUTIONS service facility. • If the monitor is powered off by the inside temperature being higher than the - NEC S401 | S401 : user's manual - Page 37
English Specifications - S401 Product Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: Design View Distance: 40" /101.6 cm diagonal 0.461 mm 1920 x 1080 Over 16 million colors (depending on video card used) 450 cd/m2 (typ) 4000:1 89° (typ) @ - NEC S401 | S401 : user's manual - Page 38
LCD 40°C Dimension 1112.8 (W) x 655.8 (H) x 140.7 (D) mm / 43.8 (W) x 25.8 (H) x 5.5 (D) inches Weight 28.0 Kg (61.7 lbs) VESA compatible arm mounting interface 300 mm x 300 mm (M6, 4 Holes) Power Management VESA DPM Plug & Play VESA DDC2B, DDC/CI, DisplayPort Accessories Setup manual - NEC S401 | S401 : user's manual - Page 39
1) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 1 3 TXD 4 connected to 6 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 2) REMOTE IN D-SUB 9P 5 9 3) REMOTE OUT English-37 - NEC S401 | S401 : user's manual - Page 40
Display Power Management Signalling (DPMS) Standard signal is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode. Mode Power consumption LED colour Normal Operation Approx. 175 W (S401 made between yourself and NEC. The mark on electrical
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
User’s Manual
MultiSync S401
MultiSync S461