NEC S521 S521 : user's manual
NEC S521 Manual
 |
UPC - 805736033199
View all NEC S521 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC S521 manual content summary:
- NEC S521 | S521 : user's manual - Page 1
User's Manual MultiSync S521 - NEC S521 | S521 : user's manual - Page 2
OPTION ...English-24 Remote Control Function ...English-27 Controlling the LCD monitor via RS-232C Remote Control English-29 Controlling the LCD monitor via LAN Control English-30 Features ...English-33 Troubleshooting ...English-34 Specifications ...English-35 Pin Assignment ...English-36 - NEC S521 | S521 : user's manual - Page 3
Tel. No.: NEC Display Solutions of America, Inc. 500 Park attached specified cables with the MultiSync S521 (L529NE) colour monitor so as used in accordance with the instructions, may cause harmful interference to Identify and Resolve Radio-TV Interference Problems." This booklet is available from - NEC S521 | S521 : user's manual - Page 4
. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE to avoid any problems. CAUTION: Please operating the MultiSync LCD monitor with its be serviced in the country where that the color monitor MultiSync S521 (L529NE) is in compliance - NEC S521 | S521 : user's manual - Page 5
servicing to qualified service operating instructions. TV* • Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC ), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. Cleaning the LCD - NEC S521 | S521 : user's manual - Page 6
Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Power cord*1 • Video Signal Cable • Wireless Remote Control and AA Batteries • Cable cover • Setup Manual • Clamp x 3 • Screw (M4 x 10) x 9 • CD-ROM • Thumbscrew for optional stand x 2*2 Video Signal Cable ( - NEC S521 | S521 : user's manual - Page 7
Force: 470 - 635N•cm) NEC recommends mounting of bracket and washer support the weight of the unit so that the unit will be safe from harm. • Refer to the instructions problems that may occur with the mounting apparatus. If a problem is detected, please refer to qualified personnel for service - NEC S521 | S521 : user's manual - Page 8
attaching accessories. VESA Mounting Interface b. Prevent Tipping When using the display with the optional table top stand, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor - NEC S521 | S521 : user's manual - Page 9
[DVD/HD1], [DVD/HD2], [SCART], [VIDEO1], [VIDEO2], [S-VIDEO] or [TV]*). These are available input only, shown as their factory preset name. PLUS button Acts "POWER INDICATOR" (see page 23), LED will not light when the LCD monitor is in active mode. AMBIENT LIGHT SENSOR Detects the level of ambient - NEC S521 | S521 : user's manual - Page 10
computer or HDTV device having a digital RGB output. * This connector does not support analog input. VGA IN (mini D-Sub 15 pin) To input analog RGB signals the audio signal from the AUDIO IN 1, 2, 3, DPORT, HDMI, and TV jack to an external device (stereo receiver, amplifier, etc.). EXTERNAL CONTROL (D- - NEC S521 | S521 : user's manual - Page 11
English Kensington Lock For security and theft prevention. EXTERNAL SPEAKER TERMINAL To output the audio signal from AUDIO 1, 2, 3, DPORT, HDMI and TV jack. Note: This speaker terminal is for 15W + 15W (8 ohm) speaker. Option board slot Slot for board accessories. Please contact your supplier for - NEC S521 | S521 : user's manual - Page 12
" mode moves left or right. SET button Makes selection. VOLUME UP/DOWN button Increases or decreases audio output level. CH UP/DOWN button* GUIDE button* MUTE button Turns on/off mute function. STILL button ON/OFF button: Activates/deactivates still picture mode. STILL CAPTURE button: Captures - NEC S521 | S521 : user's manual - Page 13
[IN2], [IN3], [HDMI], [DPORT], [TV]*1, [OPTION]*1. button Activates closed captioning. Note: board you use. Refer to the option board's manual for further information. *1: The product you purchased the top of the remote control toward the LCD monitor's remote sensor during button operation. Use the - NEC S521 | S521 : user's manual - Page 14
LCD monitor so as not to scratch the panel. 2. Install the remote control batteries The remote control is powered by two 1.5V AA batteries. To install or replace batteries: NEC before making connections. • Refer to your equipment user manual for further information. NOTE: Do not connect/disconnect - NEC S521 | S521 : user's manual - Page 15
English 5. Attach the cable cover • Use six of the M4 x 10 screws (included) to attach the cable cover. 6. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer first. 7. Operate the attached external equipment Display the - NEC S521 | S521 : user's manual - Page 16
the sound. Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram DVD player with HDMI out DVD player Stereo Amplifier Second monitor* Computer (Analog - NEC S521 | S521 : user's manual - Page 17
may not display an image correctly. Your LCD monitor displays proper image by adjusting the to your Macintosh's owner's manual for more information about your for the signal to appear. • PC-DVI signals are not supported. Connecting a Computer with DisplayPort • Please use DisplayPort cable with - NEC S521 | S521 : user's manual - Page 18
Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while up the monitor using the remote control or the Power Button on the front of the LCD. OFF ON Main Power Switch Power Button Using the remote control English-16 - NEC S521 | S521 : user's manual - Page 19
Diagnosis (Detecting failure) Red Blinking (See Troubleshooting page 34) *1 When in Eco INDICATOR (page 23), the LED will not light when the LCD monitor is in active mode. *3 "RS-232C" is selected DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* FULL WIDE ZOOM NORMAL Aspect ratio Unchanged view*6 - NEC S521 | S521 : user's manual - Page 20
RGB/HV, DPORT STANDARD sRGB AMBIENT1 AMBIENT2 HIGHBRIGHT HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHT AMBIENT Mode The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room - NEC S521 | S521 : user's manual - Page 21
PICTURE MODE Select 70 50 50 50 50 50 THANK YOU FOR SAVING THE ENVIRONMENT. CARBON FOOTPRINT 86.0 % Goto Adjustment Return Close Adjustment Settings Key Guide Press UP or DOWN button to select sub-menu. Press SET. Press UP or DOWN, PLUS or MINUS to select the function or setting to - NEC S521 | S521 : user's manual - Page 22
DICOM SIM. DICOM GSDF curve simulated for LCD type. PROGRAMMABLE A programmable gamma curve can be loaded using NEC optional software. MOVIE SETTINGS NOISE HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only AUTO*2 ADAPTIVE CONTRAST Sets the level of adjustment for dynamic - NEC S521 | S521 : user's manual - Page 23
only INPUT RESOLUTION VGA, RGB/HV inputs only If there is a problem with signal detection, this function forces the monitor to display the DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only OFF All inputs, except TV* Selecting "OFF" will display the image in a 1 by 1 pixel format. (If - NEC S521 | S521 : user's manual - Page 24
SCHEDULE RESET PIP Resets the following settings within the SCHEDULE menu back to factory setting: OFF TIMER, SCHEDULE SETTINGS. KEEP PIP MODE Allows the monitor to remain in "PIP" and "TEXT TICKER" mode after powering off. When Power is returned, PIP and TEXT TICKER appear without having to - NEC S521 | S521 : user's manual - Page 25
. POWER INDICATOR Turns ON or OFF the LED located at the front of the monitor. If "OFF" is selected, LED will not light when the LCD monitor is in active mode. EXTERNAL CONTROL CONTROL Selects the control interface, RS-232C or LAN. LAN RESET Resets the LAN settings. SETTING COPY In - NEC S521 | S521 : user's manual - Page 26
AUTO BRIGHTNESS, DDC/CI. ADVANCED OPTION INPUT DETECT All inputs except for TV* Selects the method of input detection the monitor uses when more than options have been made for the input. NORMAL LONG CABLE COMP Manually compensates for image degradation caused from using a long cable. EQUALIZE - NEC S521 | S521 : user's manual - Page 27
Some video formats may require different scanning modes in order to best display the image. HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only OVER SCAN Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the image will - NEC S521 | S521 : user's manual - Page 28
hour to erase the image. As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver Recommendations To prevent Image Sticking, and for longer life usage of LCD, the following are recommended. 1. Fixed image should not be displayed - NEC S521 | S521 : user's manual - Page 29
the MONITOR ID number is shown in white on the display, the MONITOR ID number and the REMOTE CONTROL ID are not the same. This LCD monitor can be controlled via personal computer or wireless remote control using an RS-232C connection. MONITOR ID and IR CONTROL Using one PC or - NEC S521 | S521 : user's manual - Page 30
3. Press the "DISPLAY" button on the remote control while aiming at the "PRIMARY" monitor. The Information OSD will be shown at top left side of the screen. Monitor ID: Displays the ID number of the current monitor within the daisy chain. Target ID: Displays the ID number of the monitor that to be - NEC S521 | S521 : user's manual - Page 31
by a personal computer are: • Power ON or OFF • Switching between input signals Connection LCD Monitor + PC MultiSync MultiSync PC (Out) IN OUT RS-232C (IN) RS-232C ( that are daisy-chained together please use the control command. Instructions for the control command can be found on the CD - NEC S521 | S521 : user's manual - Page 32
can be slowed down or operation may not be accepted depending the settings of your network. Should this happen, consult your network administrator. The LCD monitor may not respond if its buttons are repeatedly pressed in rapid intervals. Should this happen, wait a moment and repeat. If you still can - NEC S521 | S521 : user's manual - Page 33
of the computer being used. Example 1: When the host name of the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: When the IP address - NEC S521 | S521 : user's manual - Page 34
Alert Mail Setting http:// - NEC S521 | S521 : user's manual - Page 35
with size and weight limitations. Color the color printout (with sRGB supporting operating system and sRGB printer). Interface: Allows users to connect their LCD monitor to any VESA standard (FDMIv1 using any third party compliant device. NEC recommends using mounting interface that comply with - NEC S521 | S521 : user's manual - Page 36
supported mode has been selected on the display card or system being used. (Please consult display card or system manual nearest authorized NEC DISPLAY SOLUTIONS service facility. sensor of the LCD monitor, or when TV • Check antenna/cable connection. Use new cable if necessary. Interference in TV - NEC S521 | S521 : user's manual - Page 37
Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: Design View Distance: 52" / x (Temp - 40°C) regarding over 40°C Dimension 1256 (W) x 752 (H) x 138.5 (D) mm / 49.4 (W) x 29.6 (H) x 5.5 (D) inches Weight 36.0 Kg (79.4 lbs) VESA compatible - NEC S521 | S521 : user's manual - Page 38
1) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 1 3 TXD 4 connected to 6 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 2) REMOTE IN D-SUB 9P 5 9 3) REMOTE OUT English-36 - NEC S521 | S521 : user's manual - Page 39
guidance of your local authority, or ask the shop where you purchased the product, or if applicable, follow any agreements made between yourself and NEC. The mark on electrical and electronic products only applies to the current European Union Member States. Outside the European Union If you wish to
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
 |
 |
User’s Manual
MultiSync S521