NEC UN492VS-TMX4P Installation Instructions
NEC UN492VS-TMX4P Manual
 |
View all NEC UN492VS-TMX4P manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC UN492VS-TMX4P manual content summary:
- NEC UN492VS-TMX4P | Installation Instructions - Page 1
Inc. Rev 1.1 Parts List o (4) UN492S , UN492VS Displays o (4) Onsite Service Warranties (ONSITEMN-3Y-17) o (4) Peerless Pullout Wall Mounts (DS-VW775) that this video wall solution is anchored to must be strong enough to support the displays and the installation must be in accordance with any local - NEC UN492VS-TMX4P | Installation Instructions - Page 2
QIG-TMX4P-492SVS UN492S-TMX4P, UN492VS-TMX4P NEC Display Solutions of America, Inc. Rev 1.1 1. For mounting information, please refer to Installation Instructions provided by Peerless Industries, Inc. inside the box of the DS-VW775. 2. Connect the NEC display using the provided DisplayPort cables. - NEC UN492VS-TMX4P | Installation Instructions - Page 3
-TMX4P-492SVS UN492S-TMX4P, UN492VS-TMX4P NEC Display Solutions of America, Inc. Rev 1.1 4. Apply the OverFrame bezel kit to the video wall. Please follow instructions provided with kit. KT-49UN-OF is utilized with the UN492S/VS displays and KT-46UN-OF3 Overframe Kit 5. Screw the IR Receiver (KT - NEC UN492VS-TMX4P | Installation Instructions - Page 4
NEC Display Solutions of America, Inc. QIG-TMX4P-492SVS UN492S-TMX4P, UN492VS-TMX4P Rev 1.1 Note that LAN power is OFF out of the box so this will need to be changed for each display within the wall. 7. Go into the Multi-DSP menu of the display 1 which will be where you first started the LAN - NEC UN492VS-TMX4P | Installation Instructions - Page 5
NEC Display Solutions of America, Inc. QIG-TMX4P-492SVS UN492S-TMX4P, UN492VS-TMX4P Rev 1.1 addresses if no DNS is detected and the IP Setting within the IP Address Setting in the External Control menu is set to AUTO. Note that this is the setting out of the box. 8. If display 1 is connected to - NEC UN492VS-TMX4P | Installation Instructions - Page 6
QIG-TMX4P-492SVS UN492S-TMX4P, UN492VS-TMX4P NEC Display Solutions of America, Inc. Rev 1.1 9. Ensure that video source is connected to the DisplayPort1 (Daisy Chain In) or the HDMI1 (Daisy Chain In) interface of display 1. Note that the DisplayPort (Daisy Chain Out) on each display can be used to - NEC UN492VS-TMX4P | Installation Instructions - Page 7
NEC Display Solutions of America, Inc. QIG-TMX4P-492SVS UN492S-TMX4P, UN492VS-TMX4P Rev 1.1 fills the entirety of the wall. Activating Auto Tile Matrix changes the Tile Matrix, Tile Matrix Mem, Input Signal, Video Out Setting and DisplayPort in the Terminal Settings menu. Note that there is a - NEC UN492VS-TMX4P | Installation Instructions - Page 8
QIG-TMX4P-492SVS UN492S-TMX4P, UN492VS-TMX4P NEC Display Solutions of America, Inc. Rev 1.1 If you are experiencing issues with this setup, please call our Technical Support number at (800) 632-4662 8
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
NEC Display Solutions of America, Inc.
QIG-TMX4P-492SVS
UN492S-TMX4P, UN492VS-TMX4P
Rev 1.1
Parts List
o
(4) UN492S , UN492VS Displays
o
(4) Onsite Service Warranties (ONSITEMN-3Y-17)
o
(4) Peerless Pullout Wall Mounts (DS-VW775)
o
(1) Peerless Wall Mount Spacer (DS-VWRS091)
o
(1) 25ft Cat5e Patch Cable
o
(1) IR/Remote Control Kit (KT-RC3)
o
(2) Overframe Bezel Kits (KT-49UN-OF)
o
(1) SurgeX 4-Port Power Conditioner
o
(1) Display Wall Calibrator Kit (KT-LFD-CC2)
NOTES:
o
Any walls that this video wall solution is anchored to must be strong enough to support the displays and the
installation must be in accordance with any local building codes.
All mounting apparatuses must make secure
contact to wooden studs.
o
Please read entire document before starting installation