NEC V321-2 MultiSync LCD5710-2-AV : WMK-3257 accessory guide
NEC V321-2 Manual
 |
UPC - 805736035513
View all NEC V321-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC V321-2 manual content summary:
- NEC V321-2 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 1
Installation and Assembly - Flat Screen Wall Mount for NEC models: NEC DISPLAY SOLUTIONS OF AMERICA, INC. ASPV32, ASPV40, E321, E421, E461, LCD3210, LCD3215, LCD4020, LCD4215, LCD4615, LCD4620, LCD5220, LCD5710, M40, M46, P401, P461, P521, P551, S401, S461, S521, SC40, SC46, V321, V421, V461, X461HB - NEC V321-2 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 2
instructions. • Make sure that the supporting surface will safely support power. Block Metal Stud Brick Other or unsure? ADDITIONAL HARDWARE REQUIRED Service for Peerless accessory kit for metal studs. (not evaluated by UL) Contact Customer Service (not evaluated by UL) Contact Customer Service - NEC V321-2 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 3
Tools Needed for Assembly • stud finder ("edge to edge" stud finder is recommended) • phillips screwdriver • drill • 1/4" bit for concrete and cinder block wall • 5/32" bit for wood stud wall • level Accessories • 4 piece Metal Stud Fastener Kit (ACC 415) (Not UL listed) Before you begin, make - NEC V321-2 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 4
surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. • Never tighten in excess - NEC V321-2 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 5
a solid part of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 anchor. • Make sure that the supporting surface will safely support the combined load of the equipment damage screws, greatly reducing their holding power. • Never tighten in excess of - NEC V321-2 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 6
LCD3215 D LCD4020 D LCD4215 D LCD4615 D LCD4620 C LCD5220 D LCD5710 D M40 D M46 ScrewSize M6x12 M6x12 M6x12 holding power and level surface that will support the weight of the screen. Place 20 socket pin screws (H). M8 screws do not require multi-washers (I) I* C fig 2.3 USING TILT - NEC V321-2 | MultiSync LCD5710-2-AV : WMK-3257 accessory guide - Page 7
Mounting and Removing Flat Panel Screen WARNING • Always use an assistant or mechanical lifting equipment to safely lift and position the flat panel screen. • Do not tighten screws with excessive force. Overtightening can cause damage to mount. Tighten screws to 40 in. • lb (4.5 N.M.) maximum
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
ISSUED: 03-26-10
SHEET #: 125-9106-3
08-04-10
Maximum UL Load Capacity: 150 Ib (68 Kg)
±²³´µ¶·¸¹º»´·¼¹½¾¶¼±·´¼¿´ºÀ²Á¶³ºÂ´¶±³Ã
Model:
WMK3257
Installation and Assembly - Flat Screen Wall
Mount for NEC models:
ASPV32, ASPV40, E321, E421, E461,
LCD3210, LCD3215, LCD4020, LCD4215,
LCD4615, LCD4620, LCD5220, LCD5710,
M40, M46, P401, P461, P521, P551, S401,
S461, S521, SC40, SC46, V321, V421, V461,
X461HB, X461UN
±
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.