NEC V323-3 User Manual English

NEC V323-3 Manual

Get NEC V323-3 PDF manuals and user guides View all NEC V323-3 manuals
Add to My Manuals
Save this manual to your list of manuals

NEC V323-3 manual content summary:

  • NEC V323-3 | User Manual English - Page 1
    Large Format Display User's Manual MultiSync V323-3 MODEL: V323-3 Please find your model name in the label on the rear side of monitor.
  • NEC V323-3 | User Manual English - Page 2
    English-28 Controlling the LCD monitor via RS-232C Remote Control English-30 Controlling the LCD monitor via LAN Control English-32 Connecting to a Network...English-32 Network Setting by Using an HTTP Browser English-32 Features...English-37 Troubleshooting...English-38 Specifications...English
  • NEC V323-3 | User Manual English - Page 3
    (630) 467-3000 Type of Product: Display Monitor Equipment Classification: Class B Peripheral Model: MultiSync V323-3 (V323-3) Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. DisplayPort and DisplayPort Compliance Logo are trademarks
  • NEC V323-3 | User Manual English - Page 4
    (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns user that uninsulated voltage within , please contact NEC. For all other cases, please use the power cord with the plug style that matches the power socket where the monitor is located.
  • NEC V323-3 | User Manual English - Page 5
    MULTI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts wobbling. • If the monitor does not operate normally by following operating instructions. Recommended Use • For disturbing reflections from the screen. Cleaning the LCD Panel • When the liquid crystal panel is
  • NEC V323-3 | User Manual English - Page 6
    Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Power cord*1 • Video Signal Cable • Wireless Remote Control and AA Batteries*2 • Setup Manual • CD-ROM • Clamp x 1 • Screw with washer (M4 x 10) x 1 • Wall Mount adapter x 4 • Wall Mount adapter screw x 4 Video
  • NEC V323-3 | User Manual English - Page 7
    to insure that it is strong enough to support the weight of the unit so that the unit will be safe from harm. • Refer to the instructions included with the mounting equipment for detailed information. • Make sure there is no gap between the monitor and the bracket. • When used in a video wall
  • NEC V323-3 | User Manual English - Page 8
    place the protective sheet on the table underneath the LCD. The protective sheet was wrapped around the LCD in the original packaging. Make sure there is nothing on the table that can damage the monitor. When using mounting accessories other than NEC compliant and approved, they must comply with the
  • NEC V323-3 | User Manual English - Page 9
    done by two or more people. To install, follow those instructions included with the stand or mounting apparatus. Use only those devices LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor
  • NEC V323-3 | User Manual English - Page 10
    also page 11. Glows green when the LCD monitor is in active mode*. Glows red when the LCD is in POWER OFF mode. Glows amber when the monitor is in Power Save Mode. Green and for more than 3 seconds. To resume user mode, press both and and hold simultaneously for more than 3 seconds. English-8
  • NEC V323-3 | User Manual English - Page 11
    32. D RS-232C (D-Sub 9 pin) IN connector: Connect RS-232C input from external equipment such as a computer in order to control RS-232C functions. OUT connector: Connect RS-232C output. To connect multiple MultiSync monitors output. * This connector does not support analog input. OUT connector: To
  • NEC V323-3 | User Manual English - Page 12
    left or right. N SET button Makes selection. O VOLUME UP/DOWN button Increases or decreases audio output level. P CH UP/DOWN button*2 Q GUIDE button*2 R MUTE button Turns on/off mute function. S STILL button ON/OFF button: Activates/deactivates still picture mode. STILL CAPTURE button: Captures
  • NEC V323-3 | User Manual English - Page 13
    's action depends on which option board you use. Refer to the option board's manual for further information. Operating Range for the Remote Control Points the top of the remote control toward the LCD monitor's remote sensor during button operation. Uses the remote control within a distance of about
  • NEC V323-3 | User Manual English - Page 14
    Refer to your equipment user manual for further information. NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as to the LCD monitor by attaching the screw and clamp. NOTE: Please refer to the "Important Information" section of this manual for proper
  • NEC V323-3 | User Manual English - Page 15
    English 5. Cable Information CAUTION: Use the provided specified cables with this product so as not to interfere with radio and television reception. For DVI and mini D-Sub 15-pin, please use a shielded signal cable with ferrite core. For D-Sub 9-Pin, HDMI and DisplayPort, please use a shielded
  • NEC V323-3 | User Manual English - Page 16
    loss of the monitor image. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each
  • NEC V323-3 | User Manual English - Page 17
    to display your computer's screen image. Some display cards with a pixel clock over 162MHz may not display an image correctly. Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically. Resolution 640 x 480 800 x 600
  • NEC V323-3 | User Manual English - Page 18
    Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button. OFF
  • NEC V323-3 | User Manual English - Page 19
    and Amber blink alternately SETTINGS" enabled Diagnosis (Detecting failure) Red Blinking (See Troubleshooting page 38) *1 If "OFF" is selected in POWER INDICATOR (page 24), the LED will not light when the LCD monitor is in active mode. *2 Without any option, with factory settings, VGA input
  • NEC V323-3 | User Manual English - Page 20
    bring up the Information OSD. 1 ID number assigned to current monitor*1 2 ID number assigned monitor to be controlled via RS-232C*2 3 Input Name 4 Audio STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHT AMBIENT Mode The backlight of the LCD screen can be set to increase or decrease depending on the
  • NEC V323-3 | User Manual English - Page 21
    Sub Menu PICTURE MODE Select 70 50 50 50 50 50 THANK YOU FOR SAVING THE ENVIRONMENT. CARBON FOOTPRINT 86.0 % Goto Adjustment Return Close Key Guide Adjustment Settings Press UP or DOWN button to select sub-menu. Press SET. Press UP or DOWN, PLUS or MINUS to select the function or
  • NEC V323-3 | User Manual English - Page 22
    the dark parts and lowers the light parts of the image (S-Curve). DICOM SIM. DICOM GSDF curve simulated for LCD type. PROGRAMMABLE A programmable gamma curve can be loaded using NEC optional software. MOVIE SETTINGS NOISE REDUCTION Adjusts the amount of noise reduction. Press + or - to adjust
  • NEC V323-3 | User Manual English - Page 23
    only V RESOLUTION Adjusts the vertical size of the image. - VGA input only INPUT RESOLUTION VGA input only If there is a problem with signal detection, this function forces the monitor to display the signal at the desired resolution. After selection, execute "AUTO SETUP" if required. If no
  • NEC V323-3 | User Manual English - Page 24
    . RESET Resets the following settings within the SCHEDULE menu back to factory setting: OFF TIMER and SCHEDULE SETTINGS. PIP* KEEP PIP MODE Allows the monitor to remain in "PIP" and "TEXT TICKER" mode after powering off. When Power is returned, PIP and TEXT TICKER appear without having to enter
  • NEC V323-3 | User Manual English - Page 25
    is a function intended only to the wireless remote control buttons. This function does not lock out access to all buttons at the back of the monitor. To return to normal operation, press the "DISPLAY" button on the remote control for 5 seconds. UNLOCK MODE SELECT Selects the mode UNLOCK, ALL LOCK
  • NEC V323-3 | User Manual English - Page 26
    set between 0 and 50 seconds. 0 Sec. POWER INDICATOR Turns ON or OFF the LED located at the front of the monitor. ON If "OFF" is selected, LED will not light when the LCD monitor is in active mode. EXTERNAL CONTROL CONTROL Selects the control interface, RS-232C or LAN. RS-232C LAN RESET
  • NEC V323-3 | User Manual English - Page 27
    expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) at user determined intervals. You can set interval time and zooming ratio. This function . When HDMI, DVD/HD, SCART, VIDEO or S-VIDEO input signal is present the monitor will change and keep to the HDMI, DVD/HD, SCART, VIDEO or S-VIDEO input
  • NEC V323-3 | User Manual English - Page 28
    save mode. Note: Monitor power is not automatically "ON" when connected PC is ON. START UP PC When ON is selected, connected PC start-up. FORCE QUIT When ON is selected, it performs force-quit PC. Please use this function only when the operating system cannot be shut down manually. 120Hz (not
  • NEC V323-3 | User Manual English - Page 29
    previous image remains visible on the screen. Unlike CRT monitors, LCD monitors' image persistence is not permanent, but constant images being monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image. As with all personal display devices, NEC
  • NEC V323-3 | User Manual English - Page 30
    is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. For example: if there are many monitors being used in the same area, a remote control in normal mode would send signals to every
  • NEC V323-3 | User Manual English - Page 31
    . NOTE: If the "ID No." mode select OSD is showing, press the "DISPLAY" button on the remote control while pointing at the "PRIMARY" monitor to clear this OSD. HINT: If you lost control due to the incorrect setting of "IR CONTROL", pressing the "DISPLAY" button on the remote control
  • NEC V323-3 | User Manual English - Page 32
    Switching between input signals. • Sound Mute ON or OFF. Connection LCD Monitor + computer MultiSync MultiSync Computer (Out) RS-232C (IN) RS-232C (OUT) RS . To control monitor or multiple monitors that are daisy-chained together, please use the control command. Instructions for the control
  • NEC V323-3 | User Manual English - Page 33
    diagram For other commands, please see "External_Control.pdf" file on the CD-ROM. Function (Monitor ID = 1) Power ON Power OFF Input Source Select DisplayPort Input Source Select DVI Input Source Mute OFF Code Data 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0d 01 30 41 30 41 30 43
  • NEC V323-3 | User Manual English - Page 34
    LCD monitor monitor to a network allows for monitor control from a computer via the network. To perform the monitor of the monitor can be monitor and entering the following URL. Network Setting http://
  • NEC V323-3 | User Manual English - Page 35
    the display via that host name using a compatible browser. Example 1: When the host name of the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: When
  • NEC V323-3 | User Manual English - Page 36
    used in the authentication of the e-mail. User Name This sets the user name for logging into the authentication server when Make sure to execute "the reboot" from the "reboot screen" or to turn the monitor off and then back on to enable the changing, after clicking [Apply]. NOTE: • If
  • NEC V323-3 | User Manual English - Page 37
    -FAN CONTROL) or please contact your supplier. Please check "No picture" in "Troubleshooting". Please contact your supplier. Sample: The following examples are content of Alert Mail that informs the temperature anomaly of monitor. Sample: The following examples are content of test mail by browser
  • NEC V323-3 | User Manual English - Page 38
    the left side of HOME. CRESTRON ROOMVIEW compatibility The monitor supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network side of HOME. PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forget your password. However, if you forget your
  • NEC V323-3 | User Manual English - Page 39
    Allows you to connect your LCD monitor to any VESA standard (FDMIv1) third party mounting arm or bracket. NEC recommends using mounting interface that connectors such as DFP and P&D. The DVI interface of this display supports HDCP. TILE MATRIX, TILE COMP: Shows one image over multiple screens
  • NEC V323-3 | User Manual English - Page 40
    monitor is blinking • A certain failure might have occurred, please contact your nearest authorized NEC DISPLAY SOLUTIONS service facility. • If the monitor supported mode has been selected on the display card or system being used. (Please consult display card or system manual to the LCD monitor is
  • NEC V323-3 | User Manual English - Page 41
    Specifications LCD Module HDMI Connector Digital Audio PCM 32, 44.1, 48 KHz (16/20/24bit) DisplayPort Connector Digital Audio PCM 32, 44.1, 48 KHz DPM Power supply for Slot 2 type OPTION 16 V/3.6 A Accessories Setup manual, Power Cord, Video Signal cable, Remote Control, AA Battery x 2,
  • NEC V323-3 | User Manual English - Page 42
    Mini D-SUB 15P 1 5 6 10 11 15 2) RS-232C input/output Pin No 1 2 3 4 5 6 7 8 9 Name NC RXD TXD NC GND NC NC NC NC D-SUB 9P 1 6 This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 3) REMOTE IN 5 9 English-40
  • NEC V323-3 | User Manual English - Page 43
    can be found on our following websites: https://www.nec-display-solutions.com/p/greenvision/en/greenvision.xhtml (in Europe), https://www.nec-display.com (in Japan) or https://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced energy saving capability. When a Display Power
  • NEC V323-3 | User Manual English - Page 44
    carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords. When you dispose of such be disposed improperly. The battery shall be separated to collect by local service. English-42
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
MultiSync V323-3
Please find your model name in the label on the rear side of monitor.
Large Format Display
User’s Manual
MODEL: V323-3