NEC V421-2 V421-2 : install guide

NEC Display Solutions of America, Inc.

V421-2 Installation Guide

42” LCD Display

Rev 1.0

www.necdisplay.com

V421-2

Page 1 of 9

Contents

Product Description and Notes

Page 1

Tilt Angle and Rotation

Page 1

Ventilation Requirements

Page 2

Display Dimensions

Front, Top & Right Side

Page 3

Rear & Bottom

Page 4

Display Dimensions w/Included Speakers

Page 5

Table Top Stand Dimensions

Page 6

Optional Wall Mount Dimensions (WMK-3257)

Page 7

Input Panel

Page 8

Control Codes

Page 9

Product Description

Type:

LCD Display

Screen Surface:

Anti-Reflective

Resolution:

1920 x 1080

Dimensions without stand: 40.3”(W) x 26.2”(H) x 5.2”(D)

Aspect Ratio:

16:9

Dimensions with stand:

40.3”(W) x 25.6”(H) x 13.0”(D)

FCC:

Class B

Weight without stand:

45.2 lbs

Power Consumption:

160W (max)

Weight with stand:

49.2 lbs

BTU’s:

545.94 BTU/hour

NOTES:

•

This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not

intended to be a step-by step procedure for installation.

•

Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local

building codes. All mounts should make secure contact to wood studs.

•

4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally

to fill the screen using the menus (see “Aspect Modes” in menus and user manual).

•

Distances are in inches, for millimeters multiply by 25.4.

•

Distances may vary ±5%.

Tilt Angle and Rotation

Below are the maximum angles that the monitor can be tilted in the landscape position only.