NEC V484-Mpi OLP-484 Installation Guide
NEC V484-Mpi Manual
 |
View all NEC V484-Mpi manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC V484-Mpi manual content summary:
- NEC V484-Mpi | OLP-484 Installation Guide - Page 1
80 Point Touch Overlay Installation Guide for the OLP-484 1.0 Contents Guide Purpose Notes and Warnings Equipment Dimensional Drawings screen 3.6 Contact NEC Display Solutions support if you have any questions or require additional installation guidance support. 500 Park Boulevard, Suite 1100 - NEC V484-Mpi | OLP-484 Installation Guide - Page 2
80-Point Touch Overlay Installation Guide for the OLP-484 4.0 Equipment (1) P484/V484 PCAP Overlay NEC Display Solutions of America, Inc. Rev 1.4 (1) Spare #6-32 Philips flathead machine screw 5.0 Dimensional Drawings (1) PCAP Grounding Kit www.necdisplay.com OLP-484 2 - NEC V484-Mpi | OLP-484 Installation Guide - Page 3
80 Point Touch Overlay Installation Guide for the OLP-484 NEC Display Solutions of America, Inc. Rev 1.4 6.0 Installation Procedure 6.1 Remove the overlay from the packaging. Place the overlay face down on a - NEC V484-Mpi | OLP-484 Installation Guide - Page 4
NEC Display Solutions of America, Inc. 80-Point Touch Overlay Installation Guide for the OLP-484 Rev 1.4 6.6 With the help from at least one partner, gently install the overlay on the monitor. 6.6.1 Hook the top bracket of - NEC V484-Mpi | OLP-484 Installation Guide - Page 5
NEC Display Solutions of America, Inc. 80 Point Touch Overlay Installation Guide for the OLP-484 Rev 1.4 6.10 Return the monitor clamp brackets to their original positions. 6.11 Replace the two (2) #6-32 flathead screws to secure the - NEC V484-Mpi | OLP-484 Installation Guide - Page 6
80-Point Touch Overlay Installation Guide for the OLP-484 NEC Display Solutions of America, Inc. Rev 1.4 may result in random "false touches" or total touch system lock-up/failure. 7.2 Grounding Instructions When a monitor with 80-point overlay is installed in an enclosure or kiosk, the following - NEC V484-Mpi | OLP-484 Installation Guide - Page 7
80 Point Touch Overlay Installation Guide for the OLP-484 NEC Display Solutions of America, Inc. Rev 1.4 7.2.3 Using a #2 Philips screwdriver, remove the factory screw in the top right corner of the - NEC V484-Mpi | OLP-484 Installation Guide - Page 8
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
1
NEC Display Solutions of America, Inc.
www.necdisplay.com
OLP-484
80 Point Touch Overlay
Installation Guide for the OLP-484
Rev 1.4
1.0
Contents
Guide Purpose
Page 1
Notes and Warnings
Page 1
Equipment
Page 2
Dimensional Drawings
Page 2
Installation Procedure
Page 3
Grounding Provisions
Page 6
2.0
Purpose
2.1
This procedure describes the steps to install the PCAP touch overlay onto the P484/V484 display.
3.0
Notes and Warnings
3.1
Prior to installing the overlay, remove the NEC badge from the bottom edge of the monitor.
3.2
The overlay contains tempered glass.
Use caution when handling.
3.3
The overlay has an integrated USB cable located along the top edge of the overlay.
Ensure the
cable is not pinched, crushed, or damaged during installation.
3.4
Installation requires two persons at all times to ensure the touch frame does not bend or torque.
3.5
Once the touch screen is installed, do not lift the monitor by grasping or holding the touch screen
3.6
Contact NEC Display Solutions support if you have any questions or require additional installation
guidance support.
500 Park Boulevard, Suite 1100
Itasca, IL 60143
Phone:
(800) 632-4662