NEC V554-T Installation Guide
NEC V554-T Manual
 |
View all NEC V554-T manuals
Add to My Manuals
Save this manual to your list of manuals |
NEC V554-T manual content summary:
- NEC V554-T | Installation Guide - Page 1
V554/P554 Installation Guide 55" LCD Display NEC . • Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any using the menus (see "Aspect Modes" in menus and user manual). • Distances are in inches, for millimeters multiply by 25 - NEC V554-T | Installation Guide - Page 2
V554/P554 Installation Guide 55" LCD Display NEC Display Solutions of America, Inc. Rev 1.0 Ventilation Recommendations: Dimensions below are recommended for proper ventilation when the unit is in a recessed area. NOTE: The ventilation - NEC V554-T | Installation Guide - Page 3
V554/P554 Installation Guide 55" LCD Display Display dimensions: NEC Display Solutions of America, Inc. Rev 1.0 www.necdisplay.com V554/P554 Page 3 of 10 - NEC V554-T | Installation Guide - Page 4
V554/P554 Installation Guide 55" LCD Display Display dimensions (cont.): NEC Display Solutions of America, Inc. Rev 1.0 www.necdisplay.com V554/P554 Page 4 of 10 - NEC V554-T | Installation Guide - Page 5
Guide 55" LCD Display Display Dimensions (with ST-401 stand): NEC Display Solutions of America, Inc. Rev 1.0 NOTE: The ST-401 optional stand attaches to the VESA hole pattern on the back of the display and can be set so the display is either 30mm or 50mm from the tabletop www.necdisplay.com V554 - NEC V554-T | Installation Guide - Page 6
V554/P554 Installation Guide 55" LCD Display Optional Table Top Stand Dimensions (ST-401): NEC Display Solutions of America, Inc. Rev 1.0 NOTE: The Pole of the ST-401 stand connects directly to the VESA hole pattern on the back of the display. www.necdisplay.com V554/P554 Page 6 of 10 - NEC V554-T | Installation Guide - Page 7
V554/P554 Installation Guide 55" LCD Display NEC Display Solutions of America, Inc. Rev 1.0 Dimensions of Optional Wall Mount Kit (WMK-4655S): www.necdisplay.com V554/P554 Page 7 of 10 - NEC V554-T | Installation Guide - Page 8
V554/P554 Installation Guide 55" LCD Display NEC Display Solutions of America, Inc. Rev 1.0 Compute Module Integration: • Door on the back of the display can be opened by loosening captive screws. • Separate IO Board is necessary to accompany RPi Compute Module in unit www.necdisplay.com V554/ - NEC V554-T | Installation Guide - Page 9
V554/P554 Installation Guide 55" LCD Display Control Codes: NEC Display Solutions of America, Inc. Rev 1.0 NOTE: Contact your NEC rep for codes not listed. Cable Connection: Communication Protocol: Interface: Communication System: Baud Rate: Data Length: Parity: Stop Bit Communication Code: RS- - NEC V554-T | Installation Guide - Page 10
V554/P554 Installation Guide 55" LCD Display Input Panel (Bottom) NEC Display Solutions of America, Inc. Rev 1.0 Input Panel (Side - Rotated) Browser Control Information and control can be on the same subnet as display that is being communicated with www.necdisplay.com V554/P554 Page 10 of 10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
NEC Display Solutions of America, Inc.
V554/P554 Installation Guide
55” LCD Display
Rev 1.0
www.necdisplay.com
V554/P554
Page 1 of 10
Contents:
Product Description and Notes
Page 1
Tilt Angle and Rotation
Page 1
Ventilation Recommendations
Page 2
Display Dimensions
Page 3-4
Display Dimensions with stand
Page 5
Optional Table Top Stand Dimensions
Page 6
Dimensions of Optional Wall Mount (WMK-3255S)
Page 7
Compute Module Integration
Page 8
Control Codes
Page 9
Input Terminals
Page 10
Browser Control
Page 10
Product Description
V554
P554
Display Resolution
1920 x 1080 at 60Hz
Maximum Supported Resolution
3840 x 2160 at 30Hz
Power Consumption (Typical)
110W
125W
Power Consumption (Max Brightness)
150W
175W
Power Consumption (Overall Max)*
300W
320W
BTU's (Typical)
375.33 BTU/hr
426.52 BTU/hr
BTU’s (Max Brightness)
511.82 BTU/hr
597.12 BTU/hr
BTU’s (Overall Max)*
1023.64 BTU/hr
1091.89 BTU/hr
Net Dimensions
49.0 x 28.1 x 2.5 in. / 1244.0 x 714.8 x 62.9mm
Net Weight
54.2lbs. / 24.6kg
*Overall Max refers to when the unit is at max brightness and the following features are also active: OPS Slot, External Speaker, Raspberry Pi
Compute Module Slot
NOTES:
•
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
•
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
•
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
•
Distances are in inches, for millimeters multiply by 25.4.
Tilt Angle and Rotation
Monitor may be angled and rotated from normal landscape and portrait orientation to both face up and face down positioning.
Rotate
only clockwise for portrait orientation.