NEC X431BT X431BT : install guide

NEC X431BT Manual

NEC X431BT manual content summary:

  • NEC X431BT | X431BT : install guide - Page 1
    X431BT Installation Guide 43" LCD Display Contents Product Description and Notes Tilt Angle and Rotation Ventilation Requirements Display Dimensions Front, Top & Right Side Rear & Bottom Dimensions with Wall Mount Kit (WMK-3257) Input Panels Control Codes NEC Display Solutions of America, Inc. Rev
  • NEC X431BT | X431BT : install guide - Page 2
    X431BT Installation Guide 43" LCD Display Ventilation Requirements Dimensions below are minimum required for proper ventilation. NEC Display Solutions of America, Inc. Rev 1.1 o o o o into the design. Contact NEC for design review and recommendations. www.necdisplay.com X431BT Page 2 of 6
  • NEC X431BT | X431BT : install guide - Page 3
    X431BT Installation Guide 43" LCD Display Display dimensions NEC Display Solutions of America, Inc. Rev 1.1 www.necdisplay.com X431BT Page 3 of 6
  • NEC X431BT | X431BT : install guide - Page 4
    X431BT Installation Guide 43" LCD Display Display dimensions (cont.) NEC Display Solutions of America, Inc. Rev 1.1 Serial Rating Label MUTE INPUT EXIT + - ? ? A C IN OFF ON www.necdisplay.com X431BT Page 4 of 6
  • NEC X431BT | X431BT : install guide - Page 5
    X431BT Installation Guide 43" LCD Display Dimensions with Wall Mount Kit (WMK-3257) NEC Display Solutions of America, Inc. Rev 1.1 Serial Rating Label Input Panel Bottom: www.necdisplay.com X431BT Page 5 of 6
  • NEC X431BT | X431BT : install guide - Page 6
    X431BT Installation Guide 43" LCD Display Control Codes Function POWER ON OFF INPUT SWITCH VGA (15pin HD) RGBHV DVI FULL WIDE ZOOM AUTO SETUP EXECUTE FILM MODE OFF AUTO NEC Display Solutions of America, Inc. Rev 1.1 Code Data 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

NEC Display Solutions of America, Inc.
X431BT Installation Guide
43” LCD Display
Rev 1.1
www.necdisplay.com
X431BT
Page 1 of 6
Contents
Product Description and Notes
Page 1
Tilt Angle and Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top & Right Side
Page 3
Rear & Bottom
Page 4
Dimensions with Wall Mount Kit (WMK-3257)
Page 5
Input Panels
Page 5
Control Codes
Page 6
Product Description
Type:
LCD Display
Screen Surface:
Anti-Reflective
Resolution:
1920 x 480
Dimensions without stand:
43.2”(W) x 11.8”(H) x 7.5”(D)
Aspect Ratio:
36:9
Weight without stand:
43.2 lbs
FCC:
Class A
Power Consumption:
105 W (typ)
BTU’s:
358.28 BTU/hour
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted either landscape or portrait orientation.
Only rotate the monitor in the clockwise direction to obtain portrait orientation.