NEC X461UN-TMX4 Users Manual

NEC X461UN-TMX4 Manual

Get NEC X461UN-TMX4 PDF manuals and user guides View all NEC X461UN-TMX4 manuals
Add to My Manuals
Save this manual to your list of manuals

NEC X461UN-TMX4 manual content summary:

  • NEC X461UN-TMX4 | Users Manual - Page 1
    User's Manual MultiSync X461UN
  • NEC X461UN-TMX4 | Users Manual - Page 2
    -23 DISPLAY PROTECTION ...English-24 ADVANCED OPTION ...English-24 Remote Control Function ...English-27 Controlling the LCD monitor via RS-232C Remote Control English-29 Controlling the LCD monitor via LAN Control English-30 Features ...English-33 Troubleshooting ...English-34 Specifications
  • NEC X461UN-TMX4 | Users Manual - Page 3
    specified cables with the MultiSync X461UN (L468TP) color display so as not to in accordance with the instruction manual, may cause harmful user may find the following booklet, prepared by the Federal Communications Commission, helpful: "How to Identify and Resolve Radio-TV Interference Problems
  • NEC X461UN-TMX4 | Users Manual - Page 4
    Manufacturer We hereby certify that the color monitor MultiSync X461UN (L468TP) is in compliance with Council Directive 2006/95/EC: - EN 60950-1 Council Directive 2004/108/EC: - EN 55022 - EN 61000-3-2 - EN 61000-3-3 - EN 55024 and marked with NEC Display Solutions, Ltd. 4-13-23, Shibaura, Minato
  • NEC X461UN-TMX4 | Users Manual - Page 5
    and reflections. • Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any cleaning solution or glass cleaner! • Adjust the monitor's brightness, contrast and sharpness controls to enhance readability. • Avoid displaying fixed patterns on the monitor for long periods of
  • NEC X461UN-TMX4 | Users Manual - Page 6
    Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Power cord*1 • Video Signal Cable • Remote control cable • Setup Manual • Cable cover • Clamp x 3 • monitor. Options: • Wall mount • Tabletop Stand • Remote Control Kit (Remote control and sensor) • Over
  • NEC X461UN-TMX4 | Users Manual - Page 7
    Stand or other mounting accessory for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not
  • NEC X461UN-TMX4 | Users Manual - Page 8
    from the unit and mounting apparatus; especially when you use monitors in multiple screen. 4. Prevent Tipping When using the display with the Tabletop Stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten
  • NEC X461UN-TMX4 | Users Manual - Page 9
    within the OSD to move to previous menu. Remote control sensor and Power Indicator Receives the signal from the remote control (when using the wireless remote control). See also page 11. Glows green when the LCD monitor is in active mode*. Glows red when the LCD is in POWER OFF (ECO standby) mode
  • NEC X461UN-TMX4 | Users Manual - Page 10
    does not support analog VIDEO IN connector (Mini DIN 4 pin) To input the S-video MultiSync monitors via RS-232C daisy Chain. LAN port (RJ-45) LAN connection. See page 30. REMOTE IN/OUT Use the optional wired remote control by connecting it to your monitor. NOTE: When you use Remote IN/OUT, IR CONTROL
  • NEC X461UN-TMX4 | Users Manual - Page 11
    English Kensington Lock For security and theft prevention. Remote control sensor Receives the signal from the remote control. AMBIENT LIGHT SENSOR Detects the level of ambient light, allowing the monitor to make adjustments to various settings, resulting in a more comfortable viewing experience. Do
  • NEC X461UN-TMX4 | Users Manual - Page 12
    Remote Control (Optional) KEYPAD Press buttons to set and change passwords, change channel and set REMOTE ID. ENT button* Sets channels. DISPLAY /HD1, DVD/HD2, SCART VIDEO: VIDEO1, VIDEO2 S-VIDEO: S-VIDEO PICTURE MODE button Selects picture U.S.). GUIDE button* Enters on screen program guide (For
  • NEC X461UN-TMX4 | Users Manual - Page 13
    feature. Operating Range for the Option Remote Control Point the top of the remote control toward the sensor unit's remote control sensor in optional control kit during button operation. Use the remote control within a distance of about 7 m (23 ft.) from remote control sensor or at a horizontal and
  • NEC X461UN-TMX4 | Users Manual - Page 14
    when it was packaged, beneath the LCD monitor so as not to scratch the panel. 2. Install the remote control (Optional) batteries The remote control is powered by two 1.5V AA batteries. To install or replace batteries: NEC recommends the following battery use: • Place "AA" size batteries matching
  • NEC X461UN-TMX4 | Users Manual - Page 15
    . 9. Adjust the screen (See pages 20 and 21) Make adjustments of the screen display position when necessary. 10. Adjust the image (See page 20) Make adjustments such as "SCHEDULE SETTINGS" (See page 21). It is recommended that the "FAN CONTROL" setting (See page 24) be turned to ON also. English-13
  • NEC X461UN-TMX4 | Users Manual - Page 16
    user manual included with each separate piece of equipment. Wiring Diagram DVD player with HDMI out DVD player Stereo Amplifier Second monitor , IN3 AUDIO IN1, IN2, IN3 AUDIO IN1 Input button in remote control DVD/HD DVI HDMI DVD/HD VIDEO S-VIDEO VIDEO DVD/HD VGA DVI RGB/HV DVI • AUDIO IN 1, 2
  • NEC X461UN-TMX4 | Users Manual - Page 17
    Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer's screen image. Some video cards and a pixel clock over 162MHz may not display an image correctly. Your LCD monitor displays proper image by adjusting the factory preset timing
  • NEC X461UN-TMX4 | Users Manual - Page 18
    will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD. OFF ON Main Power Switch Power Button Using the optional
  • NEC X461UN-TMX4 | Users Manual - Page 19
    (See Troubleshooting page 34) *1 When in Eco Standby Mode RS-232C and LAN controls do not function. *2 If "OFF" is selected in POWER INDICATOR (page 23), the LED will not light when the LCD monitor is in active mode. *3 "RS-232C" is selected in EXTERNAL CONTROL. NORMAL: Displays the aspect
  • NEC X461UN-TMX4 | Users Manual - Page 20
    DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHT AMBIENT Mode The brightness of the LCD screen can be set to increase or DARK. IN BRIGHT: This is the brightness level that the monitor will go up to when the ambient light level is highest. IN DARK: This
  • NEC X461UN-TMX4 | Users Manual - Page 21
    English OSD (On-Screen-Display) Controls NOTE: Some functions may not be available depending on Key Guide Press UP or DOWN button to select sub-menu. Press SET. Press UP or DOWN, PLUS or MINUS to select the function or setting to be adjusted. Press MENU or EXIT. Remote Control Press
  • NEC X461UN-TMX4 | Users Manual - Page 22
    DICOM SIM. DICOM GSDF curve simulated for LCD type. PROGRAMMABLE A programmable gamma curve can be loaded using NEC software. MOVIE SETTINGS NOISE REDUCTION Adjusts the amount of noise reduction. Press + or - to adjust. 6*2 TV, VIDEO1, VIDEO2, S-VIDEO inputs only FILM MODE Selects Film mode
  • NEC X461UN-TMX4 | Users Manual - Page 23
    there is a problem with signal detection, this function forces the monitor to display the signal at SCART, VIDEO1, VIDEO2, S-VIDEO inputs only OFF All inputs, except TV* Selecting "OFF" will display the image in a 1 Selecting "VARIABLE" will enable to control line out level with VOLUME button.
  • NEC X461UN-TMX4 | Users Manual - Page 24
    signal is out-of range. An interval between 3 to 10 seconds for the Information OSD to appear is available. MONITOR INFORMATION Monitor Information. CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving calculation is based on the
  • NEC X461UN-TMX4 | Users Manual - Page 25
    -232C daisy chain. LOCK Prevents the monitor from being controlled by wireless remote controller. To return to normal operation, press the "DISPLAY" button on the remote controller for 5 seconds. TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 100) through
  • NEC X461UN-TMX4 | Users Manual - Page 26
    UP, DOWN, RIGHT, LEFT) at user determined intervals. You can set interval monitor switches the video source input port to the new found video source automatically. The monitor will not look for other video signals while the current video source is present. LAST DETECT When the monitor is displaying
  • NEC X461UN-TMX4 | Users Manual - Page 27
    setting based on input signal. NTSC PAL SECAM 4.43 NTSC PAL-60 SCAN MODE Some video formats may require different scanning modes in order to best display the image. HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs only OVER SCAN Image size is larger than what can be
  • NEC X461UN-TMX4 | Users Manual - Page 28
    Image Sticking, and for longer life usage of LCD, the following are recommended. 1. Fixed image should not be displayed for long period. Change fixed images after short intervals. 2. When not in use, please turn off the monitor by remote control, or use Power Management or use Schedule Functions
  • NEC X461UN-TMX4 | Users Manual - Page 29
    (see Figure 2). TO SET REMOTE CONTROL ID While holding down the REMOTE ID SET button on the remote control, use the KEYPAD to input the Monitor ID (1-100) of the display to be controlled via remote. The remote can then be used to operate the monitor having that specific Monitor ID number. When 0 is
  • NEC X461UN-TMX4 | Users Manual - Page 30
    the "DISPLAY" button on the remote control for 5 or more seconds will reset the "IR CONTROL" menu to "NORMAL" function. WIRED REMOTE CONTROL FUNCTION You can control this monitor by connecting REMOTE IN/OUT with Stereo Mini plug cable (3.5 ). MultiSync MultiSync Remote IN Remote OUT Remote IN
  • NEC X461UN-TMX4 | Users Manual - Page 31
    the control command. Instructions for the control command can be found on the CD included with the display. The file is called "External_control.pdf". 1) Interface PROTOCOL BAUD RATE DATA LENGTH PARITY BIT STOP BIT FLOW CONTROL RS-232C 9600 [bps] 8 [bits] NONE 1 [bit] NONE This LCD monitor uses
  • NEC X461UN-TMX4 | Users Manual - Page 32
    and the other information provided in your software.) Access is gained to the HTTP server function by starting display or button's response can be slowed down or operation may not be accepted depending the settings of your network. Should this happen, consult your network administrator. The LCD monitor
  • NEC X461UN-TMX4 | Users Manual - Page 33
    the host name of the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for The IP address of the monitor is required to change the network setting. The IP address will not be displayed on the Monitor's menu. Consult your
  • NEC X461UN-TMX4 | Users Manual - Page 34
    SERVER NAME Type in the SMTP server name to be connected to the monitor. Up to 60 alphanumeric characters can be used. RECIPIENT'S ADDRESS 1 to to check if your settings are correct. STATUS A reply to a test mail will be displayed. NOTE: • If you execute a test, you may not receive an Alert mail.
  • NEC X461UN-TMX4 | Users Manual - Page 35
    of this display supports HDCP. TILE MATRIX, TILE COMP: Shows one image over multiple screens with accuracy while compensating for bezel width. ZOOM: Expands image size for horizontal and vertical direction. RS-232C daisy chain: You can control the multiple monitors by controller or wireless remote
  • NEC X461UN-TMX4 | Users Manual - Page 36
    are inserted correctly. • Check if the Remote Control is pointing at the monitor's remote sensor. • Check the Remote Control Mode status. • The remote control system may not function when direct sunlight or strong illumination strikes the remote control sensor of the LCD monitor, or when there is an
  • NEC X461UN-TMX4 | Users Manual - Page 37
    Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: Design View Distance: 46" /116.8 cm diagonal 0.746 mm 1366 x 768 dots Over 16 million colors (depending on video 0.5 Vrms Control TV*2 RS-232C In: RS-232C Out: LAN: Remote IN: Remote OUT: Antenna
  • NEC X461UN-TMX4 | Users Manual - Page 38
    SYNC-GND GND DDC-SDA H-SYNC V-SYNC DDC-SCL Mini D-SUB 15P 5 10 15 2) S-VIDEO input: VIDEO Pin No 1 2 3 4 Name GND GND Y (Luminance) C (Chroma) 3) Digital connected to 1&7 9 NC This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 5) REMOTE IN 6) REMOTE OUT D-SUB 9P 5 9 1
  • NEC X461UN-TMX4 | Users Manual - Page 39
    of the product and country-specific information on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec-display.com (in Japan) or http://www.necdisplay.com (in USA). Energy Saving This monitor features an advanced
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
User’s Manual
MultiSync X461UN