NEC X461UNV X461UNV : user's manual

NEC X461UNV Manual

Get NEC X461UNV PDF manuals and user guides
UPC - 805736036770
View all NEC X461UNV manuals
Add to My Manuals
Save this manual to your list of manuals

NEC X461UNV manual content summary:

  • NEC X461UNV | X461UNV : user's manual - Page 1
    User's Manual MultiSync X462UN MultiSync X461UNV
  • NEC X461UNV | X461UNV : user's manual - Page 2
    -28 Controlling the LCD monitor via RS-232C Remote Control English-30 Controlling the LCD monitor via LAN Control English-31 Features ...English-34 EDGE COMP Function (X462UN only) ...English-35 Troubleshooting ...English-36 Specifications - X462UN ...English-37 Specifications - X461UNV ...English
  • NEC X461UNV | X461UNV : user's manual - Page 3
    cables with the MultiSync X462UN (L468TP)/MultiSync X461UNV (L460NZ) color in accordance with the instruction manual, may cause harmful and Resolve Radio-TV Interference Problems." This booklet is available NEC is a registered trademark of NEC Corporation. OmniColor is a registered trademark of NEC
  • NEC X461UNV | X461UNV : user's manual - Page 4
    it should be read carefully in order to avoid any problems. CAUTION: Please use the power cord provided with this serviced in the country where it was purchased. Declaration Declaration of the Manufacturer We hereby certify that the color monitor MultiSync X462UN (L468TP)/MultiSync X461UNV
  • NEC X461UNV | X461UNV : user's manual - Page 5
    Refer all servicing to qualified service personnel. • not operate normally by following operating instructions. Recommended Use • For optimum reflections. • Clean the LCD monitor surface with a and sharpness controls to enhance readability the National Electrical Code (NEC), in particular Section 820.
  • NEC X461UNV | X461UNV : user's manual - Page 6
    Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Power cord*1 • Video Signal Cable • Remote control cable • Setup Manual • Cable cover • Clamp x 3 • Screw (black) for cable cover (M4 x 8) x 6 • Screw (silver) for clamp (M4 x 10) x 3 • CD-ROM • Thumbscrew for
  • NEC X461UNV | X461UNV : user's manual - Page 7
    for support. For proper installation it is strongly recommended to use a trained, NEC authorized service person. Failure to follow NEC standard is strong enough to support the weight of the unit so that the unit will be safe from harm. • Refer to the instructions included with the mounting
  • NEC X461UNV | X461UNV : user's manual - Page 8
    when you use monitors in multiple screen. 4. Prevent Tipping When using the display with the optional table top stand, fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor
  • NEC X461UNV | X461UNV : user's manual - Page 9
    within the OSD to move to previous menu. Remote control sensor and Power Indicator Receives the signal from the remote control (when using the wireless remote control). See also page 11. Glows green when the LCD monitor is in active mode*. Glows red when the LCD is in POWER OFF (ECO standby) mode
  • NEC X461UNV | X461UNV : user's manual - Page 10
    a digital RGB output. * This connector does not support analog input. VGA IN (mini D-Sub 15 pin) CONTROL (D-Sub 9 pin) IN connector: Connect RS-232C input from external equipment such as a PC in order to control RS-232C functions. OUT connector: Connect RS-232C output. To connect multiple MultiSync
  • NEC X461UNV | X461UNV : user's manual - Page 11
    by connecting it to your monitor. NOTE: When you use Remote IN/OUT, IR CONTROL in OSD menu should be NORMAL. Kensington Lock For security and theft prevention. Remote control sensor Receives the signal from the remote control. AMBIENT LIGHT SENSOR Detects the level of ambient light, allowing the
  • NEC X461UNV | X461UNV : user's manual - Page 12
    Wireless Remote Control (Optional) POWER button Switches the power on/standby. INPUT button Selects selection. VOLUME UP/DOWN button Increases or decreases audio output level. CH UP/DOWN button* GUIDE button* MUTE button Turns on/off mute function. STILL button ON/OFF button: Activates/
  • NEC X461UNV | X461UNV : user's manual - Page 13
    Refer to the option board's manual for further information. *1: The product you purchased may not have this feature. Operating Range for the Option Remote Control Point the top of the remote control toward the sensor unit's remote control sensor in optional control kit during button operation. Use
  • NEC X461UNV | X461UNV : user's manual - Page 14
    LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel. 2. Install the remote control (Optional) batteries The remote control is powered by two 1.5V AA batteries. To install or replace batteries: NEC and Maintenance" section of this manual for proper selection of AC
  • NEC X461UNV | X461UNV : user's manual - Page 15
    risk of the "Image Persistence", please adjust the following items based on the application being used: "SCREEN SAVER", "SIDE BORDER COLOR" (See page 24) "DATE & TIME", "SCHEDULE SETTINGS" (See page 21). It is recommended that the "FAN CONTROL" setting (See page 24) be turned to ON also. English-13
  • NEC X461UNV | X461UNV : user's manual - Page 16
    attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Wiring Diagram DVD IN2, IN3 AUDIO IN1, IN2, IN3 AUDIO IN1, IN2, IN3 DPORT Input button in remote control DVD/HD DVI HDMI DVD/HD VIDEO S-VIDEO VIDEO DVD/HD VGA DVI RGB/HV DISPLAYPORT
  • NEC X461UNV | X461UNV : user's manual - Page 17
    not display an image correctly. Your LCD monitor displays proper image by adjusting the Refer to your Macintosh's owner's manual for more information about your the signal to appear. • PC-DVI signals are not supported. Connecting a Computer with DisplayPort • Please use DisplayPort cable with
  • NEC X461UNV | X461UNV : user's manual - Page 18
    or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button on the front of the LCD. OFF ON Main Power Switch Power Button Using the optional
  • NEC X461UNV | X461UNV : user's manual - Page 19
    Red Blinking (See Troubleshooting page 36) *1 When in Eco Standby Mode DDC/CI control does not function shown. ZOOM Using Power Management The LCD monitor follows the VESA approved DPM Picture Size, etc. Press the DISPLAY button on the remote to bring up the Information OSD. Selecting a video
  • NEC X461UNV | X461UNV : user's manual - Page 20
    AMBIENT2 HIGHBRIGHT HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* STANDARD CINEMA AMBIENT1 AMBIENT2 HIGHBRIGHT AMBIENT Mode The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the
  • NEC X461UNV | X461UNV : user's manual - Page 21
    86.0 % Goto Adjustment Return Close Adjustment Settings Key Guide Press UP or DOWN button to select sub-menu. Press SET. Press UP or DOWN, PLUS or MINUS to select the function or setting to be adjusted. Press MENU or EXIT. Remote Control Press UP or DOWN button to select. Press INPUT
  • NEC X461UNV | X461UNV : user's manual - Page 22
    installed. A programmable gamma curve can be re-loaded using NEC optional software. MOVIE SETTINGS NOISE REDUCTION Adjusts the amount of automatically upon power on. OFF H POSITION Controls the horizontal position of the image within the Display area of the LCD. - All inputs except DVI, HDMI,
  • NEC X461UNV | X461UNV : user's manual - Page 23
    RGB/HV inputs only If there is a problem with signal detection, this function forces the monitor AUDIO LINE OUT Selecting "VARIABLE" enables control of the line out level with the VOLUME a length of time. A time between 1 to 24 hours is available. OFF SCHEDULE SETTINGS Creates a working
  • NEC X461UNV | X461UNV : user's manual - Page 24
    SCHEDULE RESET PIP Resets the following settings within the SCHEDULE menu back to factory setting: OFF TIMER, SCHEDULE SETTINGS. KEEP PIP MODE Allows the monitor to remain in "PIP" and "TEXT TICKER" mode after powering off. When Power is returned, PIP and TEXT TICKER appear without having to
  • NEC X461UNV | X461UNV : user's manual - Page 25
    being controlled by the wireless remote controller. To return to normal operation, press the "DISPLAY" button on the remote controller for is selected, LED will not light when the LCD monitor is in active mode. EXTERNAL CONTROL CONTROL Selects the control interface, RS-232C or LAN. RS-232C LAN
  • NEC X461UNV | X461UNV : user's manual - Page 26
    CONTROL NOTE: When you use this function, EXTERNAL CONTROL should be "RS-232C". This function resets FAN, BRIGHTNESS and TEMPERATURE. - FAN CONTROL Cooling fan reduces the temperature of the two way communication and control of the monitor. ENABLE , STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE
  • NEC X461UNV | X461UNV : user's manual - Page 27
    signal input is changed. This function should be chosen after all adjustment options have been made for the input. NORMAL LONG CABLE COMP Manually compensates for image degradation caused from using a long cable. EQUALIZE VGA, RGB/HV inputs only OFF POLE Adjusts frequency. 0 PEAK Adjusts
  • NEC X461UNV | X461UNV : user's manual - Page 28
    COLOR SYSTEM The selected Color System depends on the video format of the input signal. VIDEO1, VIDEO2, S-VIDEO inputs only AUTO Automatically chooses Color System setting based on input signal. NTSC PAL SECAM 4.43 NTSC PAL-60 SCAN MODE Some video formats may require different scanning
  • NEC X461UNV | X461UNV : user's manual - Page 29
    all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying remote control, or use Power Management or use Schedule Functions. 3. Lower environmental temperatures prolong the lifespan of the monitor. When Protective surface (glass, acrylic) is installed over the LCD surface, the LCD
  • NEC X461UNV | X461UNV : user's manual - Page 30
    to 100 individual MultiSync monitors. For example: if there are many monitors being used in the same area, a remote control in normal mode would send signals to every monitor at the same time (see Figure 1). Using the remote in REMOTE CONTROL ID mode will only operate one specific monitor within the
  • NEC X461UNV | X461UNV : user's manual - Page 31
    " menu to "NORMAL" function. WIRED REMOTE CONTROL FUNCTION You can control this monitor by connecting REMOTE IN/OUT with Stereo Mini plug cable (3.5 ). MultiSync MultiSync Remote IN Remote OUT Remote IN IN OUT Remote control cable Remote control cable NOTE: Turn off the main power switch
  • NEC X461UNV | X461UNV : user's manual - Page 32
    Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. NOTE: When you use this function, EXTERNAL CONTROL should be "RS-232C" (See page 23). Functions that can be controlled by a personal computer are: •
  • NEC X461UNV | X461UNV : user's manual - Page 33
    Controlling the LCD monitor via LAN Control Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. NOTE: When you use this function, EXTERNAL CONTROL network administrator. The LCD monitor may not respond
  • NEC X461UNV | X461UNV : user's manual - Page 34
    host name using a compatible browser. Example 1: When the host name of the monitor has been set to "pd.nec.co.jp", access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address or the entry column of the URL. Example 2: When the IP address
  • NEC X461UNV | X461UNV : user's manual - Page 35
    , check if the Recipient's Address is correct. TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu. For Control command diagram, please see file "External_Control.pdf" on the CD-ROM. English-33
  • NEC X461UNV | X461UNV : user's manual - Page 36
    supports HDCP. TILE MATRIX, TILE COMP: Shows one image over multiple screens with accuracy while compensating for bezel width. ZOOM: Expands image size for horizontal and vertical direction. RS-232C daisy chain: You can control the multiple monitors by controller or wireless remote controller
  • NEC X461UNV | X461UNV : user's manual - Page 37
    English EDGE COMP Function (X462UN only) EDGE COMP function (Page 26) adjusts the brightness difference between the center and the edge of the screen. Adjust the brightness in accordance with your monitor. BRIGHTNESS: Reduces the brightness in the center of the screen to allow for better
  • NEC X461UNV | X461UNV : user's manual - Page 38
    failure might have occurred, please contact your nearest authorized NEC DISPLAY SOLUTIONS service facility. • If the monitor is powered off by supports an audio signal through DisplayPort. If unsure, contact the computer manufacturer. Remote Control is not available • Check the Remote Control's
  • NEC X461UNV | X461UNV : user's manual - Page 39
    Specifications - X462UN Product Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: Design View Distance: 46 Control RS-232C In: RS-232C Out: LAN: Remote IN: Remote : 0 - 3000 m Storage Environment Dimension Temperature: Humidity: -20 - 60°C
  • NEC X461UNV | X461UNV : user's manual - Page 40
    Specifications - X461UNV Product Specifications LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: Design View Distance: 46 Control RS-232C In: RS-232C Out: LAN: Remote IN: Remote : 0 - 3000 m Storage Environment Dimension Temperature: Humidity: -20 - 60°C
  • NEC X461UNV | X461UNV : user's manual - Page 41
    1) RS-232C input/output Pin No Name 1 connected to 7&8 2 RXD 1 3 TXD 4 connected to 6 6 5 GND 6 connected to 4 7 connected to 1&8 8 connected to 1&7 9 NC This LCD monitor uses RXD, TXD and GND lines for RS-232C control. 2) REMOTE IN D-SUB 9P 5 9 3) REMOTE OUT English-39
  • NEC X461UNV | X461UNV : user's manual - Page 42
    specific information on recycling facilities can be found on our following websites: http://www.nec-display-solutions.com/greencompany/ (in Europe), http://www.nec Normal Operation Approx. 200 W (X462UN) Approx. 125 W (X461UNV) Green Energy Saving Mode Less than 2 W Amber Blinking Power Off
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
User’s Manual
MultiSync X462UN
MultiSync X461UNV