Netgear AFM735 AFM735 Install Guide

Installation Guide

e

ProSafe 100MBaseFX SFP Module AFM735

Install Your Optical Module

The 100MBaseFX SFP Module provides a full-duplex 100M bps each direction for

Ethernet operation on NETGEAR managed switches.

The switch will automatically detect the AFM735, so you can simply plug it into an

available module slot.

The module can be inserted or removed while the switch is operational.

AFM735

Installing a AFM735 Module

Insert the module firmly into the slot that supports the SFP interface. The AFM735

supports legacy 62.5/125μm OM1 multimode fiber cables up to 2km.

Removing a AFM735 Module

Release the module latch by pulling down the handle bar across the module, and pull

the module out of the module slot.

Table 1:

Technical Specifications

Standards

IEEE 802.3-2002 100BaseFX

Wave Length

1310nm

Dimensions (HxWxD)

0.48" x 2.70" x 0.54"

(12.2mm x 68.56mm x 13.70mm)

Weight

0.055 lb (25g)

Operating Temperature

23 -158º F (-5 - 70ºC)

Storage Temperature

-40 ~185 ºF (-40 ~ 85ºC)

Operative relative humidity

5 to 95% @ (25ºC)

Operating Distance

Up to 2km for the 62.5/125μm MMF

Connectors

LC

Power Consumption

<1.2W

MTBF

1,587,201 Hrs(~181 years) at 25ºC

Safety Certification

UL 60950-1,CSA C22.2 No. 60950-1-03

Environmental Compliance

RoHS

AFM735_IG_12July10.fm

Page 1

Monday, July 12, 2010

12:45 PM