Netgear AXM762 AXM762 Installation Guide

e

ProSafe 10 Gigabit Ethernet SFP+ Module AXM762

Install Your Optical Module

The 10 Gigabit small form-factor pluggable (SFP+) module provides a full-duplex 10G bps

each direction for Ethernet operation on NETGEAR managed switches.

The switch will automatically detect the AXM762, so you can simply plug it into an

available module slot.

The module can be inserted or removed while the switch is operational.

AXM762

Installing a AXM762 Module

Insert the module firmly into the slot that supports the SFP+ interface. Make sure the optical

cable you use is single mode LC to LC duplex cable.

Removing a AXM762 Module

Release the module latch by pulling down the handle bar across the module, and pull the

module out of the module slot.

Technical Specifications

Standards

IEEE 802.3ae 10GBase-LR

Wavelength

1310nm

Dimensions (HxWxD)

0.46” x 0.53” x 2.19”

(11.9 mm x 13.7 mm x 55.7 mm)

Weight

19.2g

Operating Temperature

32 -158º F (0 - 70ºC)

Storage Temperature

32 -185 ºF (0 - 85ºC)

Operative relative humidity

85% @ (25ºC)

Operating Distance

2m - 10km for 9/125 um SMF

2 - 33 m for 62.5/125 um MMF

Connectors

LC for 9um/125um single mode cable

Power Consumption

<1.5w

MTBF

4,986,536 hr (569 years)

Safety Certification

UL 1950 CSA 22.2 No. 950

Environmental Compliance

-RoHS

AXM762_IG_10July09.fm

Page 1

Monday, July 13, 2009

12:23 PM