Netgear CSM4532 Product Data Sheet

Netgear CSM4532 Manual

Get Netgear CSM4532 PDF manuals and user guides View all Netgear CSM4532 manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear CSM4532 manual content summary:

  • Netgear CSM4532 | Product Data Sheet - Page 1
    out, low latency performance, and continuous serviceability in sensible applications • The M4500 switches offer 1+1 power and 4+2 NETGEAR M4500 series is covered under NETGEAR ProSAFE Limited Lifetime Hardware Warranty* • 90 days of Technical Support via phone and email, Lifetime Technical Support
  • Netgear CSM4532 | Product Data Sheet - Page 2
    100GE-Enabled Managed Switches Hardware at a Glance Data Sheet M4500 series Model name M4500-32C M4500-48XF8C FormFactor Switching Fabric 25GBASE-X SFP28 ports FRONT 100GBASE-X QSFP28 ports Full width 1-unit 1U rack mount 6.4 Tbps 32 ports 1x100G; 1x50G; 1x40G; 4x25G; 4x10G
  • Netgear CSM4532 | Product Data Sheet - Page 3
    Glance TABLE SIZE Model name MAC ARP/ NDP Routing / Switching Capacity Throughput Application Route Scaling Packet Buffer Latency M4500-32C 32K MAC 8K ARP 2.5K NDP 6.4 Tbps Line-rate M4500-48XF8C 32K MAC 8K ARP 2.5K NDP 4 Tbps Line-rate 2 Bpps 2 Bpps Static routes: 256 128 Mb IPv4
  • Netgear CSM4532 | Product Data Sheet - Page 4
    works! Then use the M4500-32C switch to aggregate the edge mirroring implementation • Service port for out NETGEAR Warranty • M4500 series is backed by a NETGEAR ProSAFE® Limited Lifetime Hardware Warranty* • Lifetime Next Business Day Hardware Replacement • ProSUPPORT 24x7 Advanced Technical Support
  • Netgear CSM4532 | Product Data Sheet - Page 5
    with identical MSTP settings. The MSTP standard lets administrators assign VLAN traffic to unique paths. • M4500 supports IEEE 802.1Q-2005, which is a version of corrected problems associated with the previous version. It provides for faster transition-to-forwarding, and incorporates new features
  • Netgear CSM4532 | Product Data Sheet - Page 6
    (MTU) size is configurable per-port (max 9K). • M4500 supports auto-detection between crossed and straight-through cables. Media-Dependent shut down, the port is put into a diagnostic-disabled state. The user must manually re-enable the interface for it to be operational. When configured to send a
  • Netgear CSM4532 | Product Data Sheet - Page 7
    switch supports L2 DHCP relay configuration on individual ports, Port-channels and VLANs. • Multicast service is a limited broadcast service that Plus is pre-configured on default VLAN 1 out of the box in all M4500 and M4300 models (M4300: starting 12.0.8.x release). • IGMP Plus can be configured
  • Netgear CSM4532 | Product Data Sheet - Page 8
    restores link to port A. The link action command option determines whether link A will come up/go down, depending upon the state of link B. • M4500 supports IPv6 Router Advertisement Guard (RA-Guard) to protect against attacks via rogue Router Advertisements in accordance with RFC 6105. RA Guard
  • Netgear CSM4532 | Product Data Sheet - Page 9
    manually defined or learned on that port. When a frame is seen on a locked port, and the frame source MAC address is not tied to that port, the protection mechanism is invoked. • The switch has a Remote Authentication Dial In User Service (RADIUS) client and can support network. M4500 supports the
  • Netgear CSM4532 | Product Data Sheet - Page 10
    in the access list. • The QoS Differentiated Services (DiffServ) feature allows traffic to be classified NMS) to manage and monitor the system through SNMP. M4500 supports SNMP v1/v2c/v3 over the UDP/IP transport the switch. This release addresses this problem by using digital signatures to verify
  • Netgear CSM4532 | Product Data Sheet - Page 11
    M4500 series Log Messages System Time Management Source IP Address Configuration Multiple Linux Routing Tables Open Network Install Environment Support time and date through NTP (Network Time Protocol) service of Linux server, or you can set the reenabled. You can manually reenable the interface, or
  • Netgear CSM4532 | Product Data Sheet - Page 12
    Support for BGP communities. • Support for IPv6. • IPv6 Transport and Prefix list • Support for BGP peer templates to simplify neighbor configuration. • M4500 supports preferences. A separate table shows the routes that have been manually configured. • VRRP provides hosts with redundant routers in
  • Netgear CSM4532 | Product Data Sheet - Page 13
    Switches Data Sheet M4500 series VRF Lite broadcasts. PIM-SSM does not use shared trees. • PIM-SM support IPv6 routes. • MLD is used by IPv6 systems (listeners and layer-3 boundary. For the traffic from a VXLAN to use services on physical devices in a distant network, the traffic must pass
  • Netgear CSM4532 | Product Data Sheet - Page 14
    20 22 24 26 28 30 32 CONSOLE 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 M4500-32C M4500-32C M4500-32C USB ID CARD M4500-32C USB ID CARD Data Sheet M4500 series M4500-48XF8C 2x100G USB CONSOLE OOB PSU1 FAN PSU2 SYS PWR BMC intel 49 51 ATOM insideTM 12 34 56 78
  • Netgear CSM4532 | Product Data Sheet - Page 15
    : CSM4532-100PRS • Warranty: Lifetime ProSAFE Hardware Warranty • The M4500-32C provides 32-port QSFP28 (100G, 50G and 40G) • QSFP28 services for AV over IP (certified SDVoE-ready) • Enhanced IGMP Plus for plug & play L2 Multicast between M4300/M4500 switches • Line-rate spine and leaf with M4500
  • Netgear CSM4532 | Product Data Sheet - Page 16
    • RJ45 RS232 console port and USB storage port • L2/L3/L4 rich services for AV over IP (certified SDVoE-ready) • Enhanced IGMP Plus for plug & play L2 Multicast between M4300/M4500 switches • Line-rate spine and leaf with M4500-32C (32-port QSFP28) • Static and dynamic routing with VRRP, OSPF, BGP
  • Netgear CSM4532 | Product Data Sheet - Page 17
    • Warranty: 5 years Data Sheet M4500 series • Modular PSU for M4500-32C and M4500-48XF8C • C14 connector • Spare unit (M4500 switches ship with two PSUs already • Warranty: 5 years • Fits into M4500 models SFP28 interfaces • 1 port Gigabit RJ45 • Supports only 1000Mbps full-duplex mode • Up to
  • Netgear CSM4532 | Product Data Sheet - Page 18
    -LR4 long reach single mode LC duplex connector up to 10km (6.2 miles) AXLM762-10000S (1 unit) 10 Gigabit SFP+ • Fits into M4500 models SFP28 interfaces Gigabit SFP • Fits into M4500 models SFP28 interfaces AXM763 10GBase-LRM long reach multimode 802.3aq - LC duplex connector up to 220m (722 ft
  • Netgear CSM4532 | Product Data Sheet - Page 19
    (3.3 ft) ACC761 100G QSFP28 Cu (passive) QSFP28 connectors ACC761-10000S (1 unit) 40 Gigabit DAC • Fits into M4500 models QSFP28 interfaces 10 Gigabit DAC • Fits into M4500 models SFP28 interfaces AXLC761 40G QSFP+ Cu (passive) QSFP+ connectors AXLC761-10000S (1 unit) 1 meter (3.3 ft) AXC761
  • Netgear CSM4532 | Product Data Sheet - Page 20
    All models Performance Summary Switching fabric M4500-32C M4500-48XF8C Throughput All models - 32 48 8 Console ports Serial RS232 RJ45 (front) PSU Slots Included PSU 2 2 x APS750W front-to-back Fan Slots Included Fans 6 6 x AFT402 front-to-back Service port (Out-of-band Ethernet
  • Netgear CSM4532 | Product Data Sheet - Page 21
    IPv6 Number of IP routing interfaces (port or VLAN) Jumbo frame support Acoustic Noise (ANSI-S10.12) M4500-32C M4500-48XF8C Heat Dissipation (BTU) M4500-32C M4500-48XF8C Mean Time Between Failures (MTBF) M4500-32C M4500-48XF8C M4500 series 64-byte frames 0.13µs 0.129µs 64-byte frames 0.417µs 0.129
  • Netgear CSM4532 | Product Data Sheet - Page 22
    Multicast DLF (unknown unicast) IGMP Snooping v1/v2/v3 MLD Snooping v1/v2 IGMPv1/v2 and MLDv1/v2 querier support IGMP Immediate Leave IGMP Plus for automatic multicast across M4300 / M4500 (Spine and Leaf) at Layer 2 (Removing the need for L3 PIM routing) 32K-2 Yes (Total: 64) Yes (Total: 64
  • Netgear CSM4532 | Product Data Sheet - Page 23
    Yes Yes Yes 32 13 64 28 Yes No Yes Yes No Yes (5 Sessions) Yes No Yes Yes Yes Yes No Yes Yes Data Sheet M4500 series
  • Netgear CSM4532 | Product Data Sheet - Page 24
    Email Alerting CLI Scheduler Auto Install ONIE support Fluentd Support Energy Efficient Ethernet (EEE) BMC Features Error-Disable Recovery Ansible Support ONIE In-band FW Upgrade In-Service Software Upgrade (ISSU) v1 v2c v3 v2 Yes Yes Yes No No No No No No Yes Yes Yes Yes Data Sheet M4500 series
  • Netgear CSM4532 | Product Data Sheet - Page 25
    Manual Configuration DHCPv6 SNMP over IPv6 HTTP over IPv6 SSH over IPv6 IPv6 Telnet Support IPv6 DNS Resolver IPv6 RADIUS Support IPv6 TACACS+ Support IPv6 Syslog Support IPv6 TFTP Support w/ MLAG Master-Backup Mode Page 25 of 29 Data Sheet M4500 series Yes Yes Yes No Yes Yes Yes Yes Yes No Yes
  • Netgear CSM4532 | Product Data Sheet - Page 26
    IBP Functional Description Uplink sets Port Groups VLAN Port Groups Service LAN & VLAN EHM Functional Description EHM Data Center Functional /MLD PIM-SM/SSM DVMRP IPv6 multicast (PIM-SM/SSM) PBR ECMP support Number of VRFs Static OSPF BFD PBR Number of sessions Static Route OSPFv2 BGP4 M4500 series
  • Netgear CSM4532 | Product Data Sheet - Page 27
    128 32 Yes Yes Yes (128) No No No No No Yes Yes Yes No No Yes MIBs can be dowloaded here: http://www.netgear.com/support/product/m4500-32c.aspx Speed, Link, Activity Power, System, PSU 1, PSU 2, Fan Width: 17.32 inches (44 cm); Height: 1U - 1.7 inches (4.32 cm); Depth: 20 inches (50
  • Netgear CSM4532 | Product Data Sheet - Page 28
    Power cord(s) Two mounting ears and screws for rack mounting (front) One set of rail kits for rack mounting (back) Installation guide Optional Modules and Accessories APS750W PSU for M4500-32C and M4500-48FX8C (front to back), only for spare, no power cord APS750W-10000S AFT402 Fan tray for
  • Netgear CSM4532 | Product Data Sheet - Page 29
    Day hardware replacement* ProSupport Service Packs Installation contracts for: PSB0304-10000S Supplemental support contracts for: PMB0314-10000S PMB0334-10000S PMB0354-10000S Ordering Information M4500-32C Americas Europe Asia Pacific China M4500-48XF8C Americas Europe
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
Highlights
A 10G to 100G solution
• The M4500-32C offers 32-port QSFP28
preconfigured for 100G and can support
40G QSFP+ and 50G QSFP28 optics or DAC
cables
• The M4500-48XF8C offers 48-port SFP28
preconfigured for 10G with 8-port 100G
QSFP28 uplinks, and the SFP28 ports can
support 10G and 25G
For Pro AV installations
• Installers opting to use M4500 switches in
their installation will find that it is already
preconfigured out of the box
•True AV and multicast Zero Touch network
configuration: Connect AV-over-IP
encoders and decoders, and power on the
switch. It just works!
Intelligent IGMP Plus
• IGMP Plus multicast allows for scalable
Pro AV installations at Layer 2 without
the PIM (Protocol Independent Multicast)
complexity
• IGMP Plus is default on VLAN 1 out of the
box and can be configured on another VLAN
for automatic IGMP across M4500 and
M4300 switches on that VLAN
Higher availability
• Meet the requirements of high
performance, high availability, fast
scale out, low latency performance,
and continuous serviceability in sensible
applications
• The M4500 switches offer 1+1 power and
4+2 fan redundancy, an x86 Intel Atom®
Processor C3558 with 8GB DDR3/ECC
RAM and 128GB SSD storage
Industry standard management
• The M4500 switches come with an industry
standard command line interface (CLI), SSH,
SNMP, sFlow, and MLAG
• An out of band 1 Gigabit Ethernet port
facilitates management, with simplified
macro-commands for AV-over-IP
configuration
Industry leading warranty
• NETGEAR M4500 series is covered under
NETGEAR ProSAFE Limited Lifetime
Hardware Warranty*
• 90 days of Technical Support via phone and
email, Lifetime Technical Support through
online chat and Lifetime Next Business Day
hardware replacement
Page 2-3
Models at a glance
Page 4
Product brief
Page 5-13
Features highlights
Page 14
Target Application (SDVoE)
Page 15-19
Components and modules
Page 20-29
Tech specs and ordering information
100GE-Enabled Managed Switches
Data Sheet
M4500 series
Page 1 of 29
The trend of moving matrix switching into the Ethernet network is accelerating
and AV over IP already delivers capabilities far beyond that of a traditional
matrix switch. Historically it has been simple to design AV over IP systems of up
to 96 I/Os using a single switch and Layer-2 Multicast IGMP. However, larger
installations required data center-class 100G Ethernet switches with more
complex Layer-3 multicast routing techniques, adding complexity and cost to
the Ethernet infrastructure.
As networked AV systems become ever larger, a
new class of switches has come to market. They combine the configurability of
a matrix switch with the power and scalability of Ethernet to support hundreds
of AV over IP endpoints, at a price point dramatically cheaper than comparable
matrix switches. Introducing two new 100GE enabled switches for ProAV,
the M4500 series. Removing the need for Layer-3 PIM routing, these new
switches offer IGMP Plus and greatly simplify system architectures with the
same well-known Layer-2 techniques across the entire AV over IP network.
Installers opting to use M4500 switches in their installation will find that it is
already preconfigured out of the box.