Netgear DG632 Installation Guide

If software usually logs you in to the Internet, do not run it.

The Internet Explorer Tools Internet Options Connections page should be set to

“Never dial a connection.”

g.

Install a filter on each phone device that shares the phone line with your router.

Note:

Use one-line filters for connecting additional phones.

2

2

Log in to the DG632

Note:

Your computer needs to be configured for DHCP. For help with this, see the

Reference Manual or tutorials on the

ADSL Modem Router Resource CD.

a.

Connect to the router by typing

http://192.168.0.1

in the address field of

Internet Explorer or Netscape

®

Navigator.

b.

When prompted, enter

admin

for the user name and

password

for the password,

both in lower case letters. After logging in, you will see the menu below.

If you do not see the menu above, click the

Setup Wizard

link on the upper left

of the main menu.

Start Here

Follow these instructions to set up your ADSL Modem Router.

Before you begin, locate the ADSL configuration information from your Internet Service

Provider (ISP). Also, if you purchased the DG632 in a country where a microfilter is not

included, you must acquire one.

1

1

Connect the DG632 to the ADSL Line

ADSL signals degrade phone sound quality. Microfilters block such problems and are

required for each phone or fax. There are two types: one-line microfilters; and two-

line microfilters which include a built-in splitter. Sharing a phone outlet with two

devices requires a splitter.

The procedure below illustrates using a two-line combo

microfilter/splitter. You can accomplish the same result

using a one-line microfilter with a separate phone line

splitter.

a.

Insert the filter into the phone outlet and connect

the phone to the phone connector

(A)

.

b.

Turn off your computer.

c.

Connect the ADSL port

(B)

of the DG632 to the ADSL connector of the

two-line filter.

Note

: Improperly connecting a filter to your DG632 will block ADSL signals

and prevent connecting to the Internet.

d.

Connect the Ethernet cable

(C)

from a LAN port of your DG632 to the

Ethernet adapter in your computer.

e.

Plug in the router and verify the following:

The power light is lit after applying power to the router.

The ADSL link light is solid green, indicating a link has been

established to the ADSL network.

f.

Now, turn on your computer and verify the following:

The local lights are lit for any connected computers.

ADSL Modem Router

DG632

Installation Guide

Phone

DSL

Line

Phone

Phone

DSL

Line

Two-Line Combo

Microfilter/Splitter

One-Line Microfilter

Splitter

Phone

DSL

Line

DG632 ADSL Modem Router

B

A

Phone

DSL

Line

DG632 ADSL

Modem Router

C

Netgear DG632 Installation Guide

Netgear DG632 - ADSL Modem Router Manual

Netgear DG632 manual content summary: