Netgear DG834v3 DG834v3 Setup Manual

Netgear DG834v3 - ADSL Modem Router Manual

Get Netgear DG834v3 - ADSL Modem Router PDF manuals and user guides View all Netgear DG834v3 manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear DG834v3 manual content summary:

  • Netgear DG834v3 | DG834v3 Setup Manual - Page 1
    ADSL Modem Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10026-01 2006-2
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 2
    , Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 3
    Wizard Setup ...1-4 Manual Setup ...1-5 Understanding ADSL Microfilters 1-5 Computers Set to DHCP 1-6 Manually Setting Up Your ADSL Modem Router 1-6 Chapter 2 Troubleshooting Basic Functioning ...2-1 Power LED Not On 2-2 Test LED Never Turns On or Test LED Stays On 2-2 LAN or ADSL Internet Port
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 4
    Testing the Path from Your Computer to a Remote Device 2-8 Restoring the Default Configuration and Password 2-9 Using the Reset Button 2-9 Appendix A Technical Specifications Appendix B Related Documents 2 v1.1, 2006-2
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 5
    • ADSL Modem Router • AC power adapter (varies by region) • Category 5 (Cat 5) Ethernet cable • Telephone cable with RJ-11 connector • Microfilters (quantity and type vary by region) • Resource CD, including: - The Smart Wizard Installation Assistant - This manual • Warranty and Support Information
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 6
    ADSL Modem Router Setup Manual The Router's Front Panel The ADSL modem router front panel shown below contains status LEDs. 1 2 to the router. Power is not supplied to the router. The system is initializing. The system is ready and running. Indicates ADSL training. The Internet port has detected
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 7
    , the rear panel contains the following elements: 1. RJ-11 ADSL port for connecting the router to an ADSL line 2. Four Local Ethernet RJ-45 LAN ports for connecting the router to the local computers 3. AC power adapter outlet 4. Factory Default Reset push button What You Need Before You Begin You
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 8
    parameters to connect your router to the Internet: • Virtual Path Identifier (VPI)/Virtual Channel Indentifier (VCI) parameters • Multiplexing Method • Host and Domain Names • ISP Login Name and Password • ISP Domain Name Server (DNS) Addresses • Fixed or Static IP Address Your ISP should have
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 9
    ADSL Modem Router Setup Manual 1. Locate the ADSL settings information your Internet service provider gave you. 2. Insert the NETGEAR CD into a Windows PC. The CD will automatically start and detect the language you are using on your PC. Note: If the CD does not automatically start, browse
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 10
    the case. The NETGEAR Smart Wizard CD automatically takes care of this requirement. For manual setup, refer to the documentation that came with your computer. Manually Setting Up Your ADSL Modem Router There are four steps to setting up your ADSL modem router: 1-6 Connecting the Router to the
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 11
    Setup Manual 1. Install ADSL filters on the phone lines. 2. Connect the router to the ADSL line. 3. Log in to the router. 4. Connect to the Internet. Follow the steps below to connect your router to your network. Before you begin, locate the ADSL configuration information from your Internet Service
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 12
    !$3, 0HONE ADSL Modem Router Setup Manual b. Two-Line Filter Example. Insert the two-line filter into the phone outlet and connect the phone to the phone line , connect the one-line filter to the splitter, and connect the phone to the filter. 1-8 Connecting the Router to the Internet v1.1, 2006-2
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 13
    ADSL Modem Router Setup Manual 2. Connect the ADSL modem router to the ADSL filter. a. Using the included phone cable with RJ-11 jacks, connect the ADSL port (B) of the ADSL modem router to the ADSL port (C) of the two-line filter. C B Figure 1-7 Warning: Improperly connecting a filter to your ADSL
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 14
    Modem Router Setup Manual b. Connect the Ethernet cable (D) from a ADSL modem router LAN port to the Ethernet adapter in your computer. D Figure 1-8 c. Connect the power adapter to the router and plug it in to a power outlet. Verify the following: The power light is lit after turning on the router
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 15
    ADSL Modem Router Setup Manual a. Type http://192.168.0.1 in the address field of a browser such as Internet Explorer or Netscape® Navigator. Figure 1-9 This login window opens: Figure 1-10 Enter admin for the user name and password for the password, both in lower case letters. b. After logging in,
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 16
    . From the bottom of the Setup menu, click Test. If the NETGEAR Web site does not appear within one minute, refer to Chapter 2, "Troubleshooting". Your ADSL modem router is now configured to provide Internet access for your network. Your ADSL modem router automatically connects to the Internet when
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 17
    This chapter gives information about troubleshooting your ADSL modem router. After each problem description, instructions are provided to help you diagnose and solve the problem. For the common problems listed, go to the section indicated. • Is the router on? Go to "Basic Functioning
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 18
    the router's configuration to factory defaults. This will set the router's IP address to 192.168.0.1. This procedure is explained in "Using the Reset Button" on page 2-9. If the error persists, you might have a hardware problem and should contact technical support. 2-2 Troubleshooting v1.1, 2006
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 19
    and reboot your computer. • If your router's IP address was changed and you do not know the current IP address, clear the router's configuration to factory defaults. This will set the router's IP address to 192.168.0.1. This procedure is explained in "Using the Reset Button" on page 2-9. • Make sure
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 20
    ADSL Modem Router Setup Manual • Make sure you are using the correct login information. The factory default login name is admin and the password is password. Make sure that CAPS LOCK is off when entering this information. If the router does not save changes you have made in the Web Configuration
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 21
    your ADSL modem router has not obtained an IP address from your ISP. If your router is unable to obtain an IP address from the ISP, the problem may be one of the following: • Your ISP may require a Multiplexing Method or Virtual Path Identifier/Virtual Channel Identifier parameter. Troubleshooting
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 22
    the Service Name, User Name and Password. See "Troubleshooting PPPoE or PPPoA", below. • Your ISP may check for your computer's host name. Assign the computer Host Name of your ISP account to the ADSL modem router in the browser-based Setup Wizard. • Your ISP only allows one Ethernet MAC address to
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 23
    or Password. There also may be a provisioning problem with your ISP. Note: Unless you connect manually, the ADSL modem router will not authenticate using PPPoE or PPPoA until data is transmitted to the network. Troubleshooting Internet Browsing If your ADSL modem router can obtain an IP address but
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 24
    ADSL Modem Router Setup Manual 1. From the Windows toolbar, click the Start button and select Run. 2. In the field provided, type Ping followed by the IP address of the router, as in this example: ping 192.168.0.1 3. Click OK. You should see a message like this one: Pinging with 32
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 25
    the administration password or IP address, you must use the Default Reset button on the rear panel of the router. 1. Press and hold the Reset button until the Test LED turns on (about 10 seconds). 2. Release the Default Reset button and wait for the router to reboot. Troubleshooting 2-9 v1
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 26
    ADSL Modem Router Setup Manual 2-10 v1.1, 2006-2 Troubleshooting
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 27
    specifications for the ADSL modem router. Network Protocol and Standards Compatibility Data and Routing Protocols: Power Adapter North America: UK, Australia: Europe: Japan: All regions (output): Physical Dimensions: Weight: Environmental Operating temperature: Operating humidity: TCP/IP
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 28
    ADSL Modem Router Setup Manual A-2 Technical Specifications v1.1, 2006-2
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 29
    of the technologies used in your NETGEAR product. Document Link Internet Networking and TCP/IP Addressing http://documentation.netgear.com/reference/enu/tcpip/index.htm Wireless Communications http://documentation.netgear.com/reference/enu/wireless/index.htm Preparing a Computer for Network
  • Netgear DG834v3 | DG834v3 Setup Manual - Page 30
    ADSL Modem Router Setup Manual B-2 Related Documents v1.1, 2006-2
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
208-10026-01
2006-2
NETGEAR
, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
ADSL Modem Router
Setup Manual