Netgear DGN2200 DGN2200 User Manual - Page 21
Configuring ADSL Settings, Multiplexing Method, LLC-based, Apply - at t setup
UPC - 606449067279
View all Netgear DGN2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Wireless-N 300 Modem Router DGN2200 User Manual Configuring ADSL Settings Note: For information about how to install ADSL filters, see the Setup Manual. NETGEAR recommends that you use the Setup Wizard to automatically detect and configure your ADSL settings. This usually works fine. However, if you have technical experience and are sure of the multiplexing method and virtual circuit number for the virtual path identifier (VPI) and virtual channel identifier (VCI), you can specify those settings here. Note: NETGEAR recommends using the Setup Wizard to select the correct country to optimize detection of the ADSL settings. If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting: 1. From the main menu, select ADSL Settings.The ADSL Settings screen displays. Figure 1-6 2. In the Multiplexing Method drop-down list, select LLC-based or VC-based. 3. For the VPI, type a number between 0 and 255. The default is 8. 4. For the VCI, type a number between 32 and 65535. The default is 35. 5. Click Apply. Configuring Your Internet Connection 1-9 v1.0, March 2010