Netgear DGN2200 DGN2200 User Manual - Page 33

admin, password, Next., Using the Push Button, Push Button, Advanced Wireless Settings screen. See - advanced routing

Get Netgear DGN2200 - Wireless-N 300 Router PDF manuals and user guides
UPC - 606449067279
View all Netgear DGN2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Wireless-N 300 Modem Router DGN2200 User Manual To set up basic wireless connectivity: 1. Log in to the wireless-N modem router at its default LAN address of http://192.168.0.1 with its default user name of admin and default password of password, or using whatever LAN address and password you have set up. You can also enter either of these addresses to connect to the wireless-N modem router: http://www.routerlogin.net or http://www.routerlogin.com. 2. Select Add WPS Client (computers that will connect wirelessly to the router are clients) in the main menu. The Add WPS Client wizard screen displays. Note: If you cannot select Add WPS Client, check to see if WPS is disabled in the Advanced Wireless Settings screen. See "Using Static Routes" on page 6-15. 3. Click Next. The screen changes to allow you to select the method for adding the WPS client. 4. Select the method for adding the WPS client. A WPS client can be added using the Push Button method or the PIN method. • Using the Push Button. This is the preferred method. (See Figure 2-3 on page 2-12.) - Select the Push Button radio button and either press the WPS Push Button on the front panel of the wireless-N modem router or click the soft WPS Push Button on the screen (as shown below). - The wireless-N modem router tries to communicate with the client; you have 2 minutes to enable WPS from the client device using its WPS networking utility. : Figure 2-3 Configuring Your Wireless Network and Security Settings v1.0, March 2010 2-12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Wireless-N 300 Modem Router DGN2200 User Manual
Configuring Your Wireless Network and Security Settings
2-12
v1.0, March 2010
To set up basic wireless connectivity:
1.
Log in to the wireless-N modem router at its default LAN address of
with
its default user name of
admin
and default password of
password
, or using whatever LAN
address and password you have set up.
2.
Select Add WPS Client (computers that will connect wirelessly to the router are clients) in the
main menu. The Add WPS Client wizard screen displays.
3.
Click
Next.
The screen changes to allow you to select the method for adding the WPS client.
4.
Select the method for adding the WPS client. A WPS client can be added using the Push
Button method or the PIN method.
•
Using the Push Button
. This is the preferred method. (See
Figure 2-3 on page 2-12
.)
–
Select the
Push Button
radio button and either press the WPS Push Button on the
front panel of the wireless-N modem router or click the soft WPS Push Button on the
screen (as shown below).
–
The wireless-N modem router tries to communicate with the client; you have 2
minutes to enable WPS from the client device using its WPS networking utility.
:
You can also enter either of these addresses to connect to the wireless-N modem
router:
or
.
Note:
If you cannot select Add WPS Client, check to see if WPS is disabled in the
Advanced Wireless Settings screen. See
“Using Static Routes” on page 6-15
.
Figure 2-3