Netgear DGN2200 DGN2200 User Manual - Page 99
Repeater with Wireless Client Association, Remote MAC Address - wireless repeater
UPC - 606449067279
View all Netgear DGN2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Wireless-N 300 Modem Router DGN2200 User Manual Repeater with Wireless Client Association In the repeater mode with wireless client association, the DGN2200 wireless-N modem router sends all traffic to a remote AP. For the repeater mode, you must enter the MAC address of the remote "parent" access point. Alternatively, you can configure the DGN2200 wireless-N modem router as the parent by entering the address of a "child" access point. Note that the following restrictions apply: • You do not have the option of disabling client associations with this DGN2200 wireless-N modem router. • You cannot configure a sequence of parent/child APs. You are limited to only one parent AP, although if the DGN2200 wireless-N modem router is the parent AP, it can connect with up to four child APs. The following figure shows an example of a Repeater mode configuration. Wireless PC associated with AP 1 DGN2200 Wireless PC associated with AP2 Internet 192.168.0.1 PCs AP 1 (parent AP in repeater mode) Figure 6-18 AP 2 in repeater mode AP 3 in repeater mode Wireless PC associated with AP 3 To set up a repeater with wireless client association: 1. Configure the operating mode of the devices. • Configure AP 1 (the DGN2200 wireless-N modem router in Figure 6-18) on with the MAC address of AP 2 and AP 3 in the first two Remote MAC Address fields. • Configure AP 2 with the MAC address of AP 1 in the Remote MAC Address field. • Configure AP 3 with the MAC address of AP 1 in the Remote MAC Address field. 6-24 v1.0, March 2010 Advanced Configuration