Netgear DGN2200v3 DGN2200v3 User Manual - Page 90

Universal Plug and Play, Private, Active, Apply

Get Netgear DGN2200v3 PDF manuals and user guides View all Netgear DGN2200v3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

N300 Wireless ADSL2+ Modem Router DGN2200v3 2. Click Add to open the following screen. 3. Fill in the fields: • In the Route Name field, enter a route name for this static route. This name is for identification purpose only. • Select Private if you want to limit access to the LAN only. The static route will not be reported in RIP. • Select Active to make this route effective. • Enter the destination IP address of the final destination. • Enter the IP subnet mask for this destination. If the destination is a single host, type 255.255.255.255. • Enter the gateway IP address, which has to be a router on the same LAN segment as the modem router. • In the Metric field, enter a number between 2 and 15 as the metric value. This represents the number of routers between your network and the destination. Usually, a setting of 2 or 3 works. 4. Click Apply to save your changes. The Static Routes table is updated to show the new entry. Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network. Advanced Settings 90

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Advanced Settings
90
N300 Wireless ADSL2+ Modem Router DGN2200v3
2.
Click
Add
to open the following screen.
3.
Fill in the fields:
•
In the Route Name field, enter a route name for this static route. This name is for
identification purpose only.
•
Select
Private
if you want to limit access to the LAN only. The static route will not be
reported in RIP.
•
Select
Active
to make this route effective.
•
Enter the destination IP address of the final destination.
•
Enter the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255
.
•
Enter the gateway IP address, which has to be a router on the same LAN segment as
the modem router.
•
In the Metric field, enter a number between 2 and 15 as the metric value. This
represents the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works.
4.
Click
Apply
to save your changes. The Static Routes table is updated to show the new
entry.
Universal Plug and Play
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.