Netgear FS726T FS726T User Manual - Page 25
Switch> Monitor Switch> Advanced> Jumbo Frame - configuration
UPC - 606449038415
View all Netgear FS726T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Switch> Monitor Page Smart Switch Series Software Manual The Monitor feature allows you to configure any port's incoming and/or outgoing traffic to be mirrored to a pre-defined sniffer port. Sniffer Mode: • .Disable - disable port mirroring globally. • .RX - mirroring only the ingress traffic to the designated source ports. • .TX - mirroring only the egress traffic to the designated source ports. • Both - mirroring both incoming and outgoing traffic on the designated source ports. • Sniffer Port: Select one from a pull-down menu. • Source Ports: Select any number of ports to be monitored (mirrored). The ports can not be the Sniffer port Switch> Advanced> Jumbo Frame This page allows you to enable or disable the Jumbo Frame support. Jumbo Frames are not an approved standard Ethernet frame size, so you will need to ensure that all of your networking gear can support these non-standard Jumbo Frames to prevent them from being dropped. By clicking 'Help' button on this page, you can see the maximum frame size the switch can carry. Web-Based Management Interface July 2005 4-11