Netgear FSM726E FSM726E Hardware Installation Guide

Netgear FSM726E - ProSafe Switch Manual

Get Netgear FSM726E - ProSafe Switch PDF manuals and user guides
UPC - 606449063820
View all Netgear FSM726E manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear FSM726E manual content summary:

  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 1
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134 USA 202-10452-02 November 2008
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 2
    Support information card. E-mail: [email protected] North American NETGEAR website: http://www.netgear.com Trademarks NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR NETGEAR ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726E instructions.
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 3
    with the instructions, may cause the NETGEAR ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726E is shielded user may be required to take appropriate measures. Customer Support Refer to the Support Information Card that shipped with your ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726E
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 4
    that you can access at the universal resource locator (URL) http://www.netgear.com. A direct connection to the Internet and a Web browser such as Publication Part Number: Publication Version Number FSM726E November 2008 switch chassis Managed Layer 2 Switch Business English 202-10452-02 1.0 4
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 5
    2-5 Connecting to Power and Checking the LEDs 2-5 SFP Modules ...2-6 Connecting Equipment to the Switch 2-6 RJ-45 Ports ...2-6 Connecting a Console to the Switch 2-7 Chapter 3  Troubleshooting Troubleshooting Chart 3-1 Additional Troubleshooting Suggestions 3-2 v v1.0, November 2008
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 6
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide Appendix A  Factory Default Settings and Technical Specifications Factory Default Settings A-1 Technical Specifications A-2 vi v1.0, November 2008
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 7
    About This Manual The NETGEAR® ProSafe® Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide describes how to install, configure and troubleshoot the ProSafe 24Port Ethernet L2 Managed Switch Model FSM726E. The information in this manual is intended for readers
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 8
    FSM726E Hardware Installation Guide • Scope. This manual is written for the Managed Layer 2 Switch according to these specifications: Product Version Manual Publication Date ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726E November 2008 Note: Product updates are available on the NETGEAR
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 9
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide • Click the PDF of This Chapter link at the top left corner of any page in the chapter you want to print. The PDF version of the chapter you were viewing opens in a browser window. • Click the print icon in the
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 10
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide 4 v1.0, November 2008
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 11
    powerful management features that you can use to eliminate bottlenecks, boost performance, and increase productivity. This guide describes the ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726E. The switch can be free-standing, or rack-mounted in a wiring closet or an equipment room. For
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 12
    with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide The following table describes the LEDs on the front panel of the switch. Table 1. LED Descriptions for FSM726E LED PWR (Power) FAN 10/100 (port 1 to 24)  (1 LED per port) SFP ports (100/1000 Mbps) 10/100/1000M ports (1 LED per
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 13
    Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide Rear Panel The rear panel has a console port and a standard AC power receptacle for the supplied power cord. Console port Power receptacle Figure 2 Safety Instructions , or contact your trained service provider: - The power
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 14
    Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide service provider or local power company. • To help avoid damaging your system, be sure that the voltage selection switch Korea and Taiwan - 100 V, 50 Hz in eastern Japan and 100 V, 60 Hz in Do not use adapter plugs or remove the
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 15
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide • Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. • Always follow your local and national wiring rules. •
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 16
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide 1-6 Introduction v1.0, November 2008
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 17
    the Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, the Administration Manual for the 7200 Series Layer-2 Switches, and this Hardware Installation Guide • Warranty and Support Card If you ordered SFP modules with your switch, they are provided in a separate package. If
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 18
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide Protecting Against Electrostatic Discharge Warning Note: If any item is found missing or damaged, contact your local NETGEAR reseller for replacement. 5. Inspect the products and accessories for damage. Report
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 19
    FSM726E Hardware Installation Guide Installation Install the equipment in the following sequence, as presented in this chapter: 1. Select a Location. See "Selecting a Location. 2. Install the Switch. See "Installing the Switch for the switch are shown in Appendix A, "Factory Default Settings and
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 20
    with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide Table 2-1. Site Requirements for Switch Location (continued) Requirements Cabling Route the cable to avoid sources of electrical noise such as radio transmitters, broadcast amplifiers, power lines, and fluorescent lighting fixtures
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 21
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide 3. Tighten the screws with a No. 1 the AC power adapter cable to the rear of the switch, and the other end to a grounded three-pronged AC outlet. 2. Check the Power LED on the front panel of the switch. The LED
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 22
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide SFP Modules The module bay accommodates Note: Ethernet specifications limit the cable length between the switch and the attached device to 328 feet (100 meters). 2-6 Hardware Installation v1.0, November 2008
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 23
    with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide Connecting a Console to the Switch After you install the switch and apply power, you can connect to it with a terminal or workstation. You can use the Command Line Interface (CLI) to identify the IP address. To use a console, you
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 24
    Gigabit Ethernet Ports FSM726E Hardware Installation Guide After you connect a console to the switch, you will need to configure the switch. The following documents are provided for this purpose: • Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches: Gives detailed examples
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 25
    , causes, and solutions of possible problems. Table 3-1. Troubleshooting Problem Cause Solution Power LED is off. No power is received Link LED is off or intermittent. Port connection is not working. Check the power cord connections for the switch at the switch and at the connected device
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 26
    2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide Additional Troubleshooting Suggestions If the suggestions in Table 3-1 do not resolve your problem, refer to the troubleshooting suggestions in this section. • Network Adapter Cards  Make sure that the network adapter cards
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 27
    the ProSafe 24-Port Ethernet L2 Managed Switch Model FSM726E. Table A-1. Default Configuration Settings Features Port speed Port duplex Flow control (half duplex) Flow control (full duplex) Broadcast storm control Gigabit port type Management IP configuration Password protection User name Password
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 28
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide Table A-1. Default Configuration Settings (continued) Features Port mirroring Traffic prioritization ACL GVRP GMRP MAC address aging SNMP community VLAN Ingress filtering Default Setting Disabled Disabled
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 29
    2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide Table A-2. Technical Specifications (continued) Feature (continued) Power consumption Dimensions (W x D x H) Weight Management Environment Electromagnetic emissions and immunity Safety Description 15 W maximum 100-240
  • Netgear FSM726E | FSM726E Hardware Installation Guide - Page 30
    Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide A-4 Factory Default Settings and Technical Specifications v1.0, November 2008
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
202-10452-02
November 2008
NETGEAR
, Inc.
350 E. Plumeria Drive
San Jose, CA 95134 USA
Managed Layer 2 Switch
with 2 Gigabit Ethernet
Ports FSM726E Hardware
Installation Guide