Netgear GC110P Hardware Installation Guide
Netgear GC110P Manual
 |
View all Netgear GC110P manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GC110P manual content summary:
- Netgear GC110P | Hardware Installation Guide - Page 1
Hardware Installation Guide Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports (and PoE on Model GC110P Only) Models GC110 and GC110P April 2020 202-11953-02 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA - Netgear GC110P | Hardware Installation Guide - Page 2
accéder à ce document en français canadien à https://www.netgear.com/support/download/. (If this product is sold in Canada, you can access this document in Canadian French at https://www.netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity - Netgear GC110P | Hardware Installation Guide - Page 3
8 Safety instructions and warnings 9 Chapter 2 Hardware Overview Hardware description 13 Front panel 13 Back panel 13 LEDs 15 Switch hardware interfaces 16 RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity..16 SFP ports for fiber connectivity 16 Multi-function Reset button 17 - Netgear GC110P | Hardware Installation Guide - Page 4
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports Step 9: Manage the switch 34 Chapter 5 Troubleshooting Troubleshooting chart 36 PoE troubleshooting suggestions 37 Additional troubleshooting suggestions 37 4 - Netgear GC110P | Hardware Installation Guide - Page 5
: • Overview • Features • Safety instructions and warnings Note: For more information about the topics that are covered in this manual, visit the support website at netgear.com/support. Note: For technical specifications on the Models GC110 and GC110P, visit https://www.netgear.com/GC110 and see the - Netgear GC110P | Hardware Installation Guide - Page 6
knowledge base articles at netgear.com/support. • Insight Cloud portal. Using the NETGEAR Insight Cloud portal, you can set up the switch in the network, perform advanced remote management, monitor the switch, analyze the switch and network usage, and, if necessary, troubleshoot the switch and the - Netgear GC110P | Hardware Installation Guide - Page 7
manual, which you can download from netgear.com/support/download. Note: The switch is designed for management by NETGEAR Insight: You can use the NETGEAR or tablet. By default, the local browser UI is disabled and you cannot use it while the switch is managed by NETGEAR Insight. You can install Guide - Netgear GC110P | Hardware Installation Guide - Page 8
ports. • PoE on copper ports (model GC110P): - Eight ports PoE (IEEE 802.3af) IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX - IEEE 802.1Q VLAN tagging - IEEE 802.3x Full-duplex flow control - IEEE - IEEE 802.1ab LLDP - IEEE 802.1p Class of Service (QoS) - IEEE 802.1D Spanning Tree Protocol (STP) Guide - Netgear GC110P | Hardware Installation Guide - Page 9
is supported on GC110P only) - Per-port link and activity LED for SFP fiber ports • NETGEAR green power-saving features: - Energy efficiency mode that fully conforms to the IEEE 802.3az standard - Per-port automatic change to a lower power mode when the port link is down Safety instructions - Netgear GC110P | Hardware Installation Guide - Page 10
system components, and never operate the product in a wet environment. If the system gets wet, see the appropriate section in your troubleshooting guide, or contact your trained service provider. • Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by - Netgear GC110P | Hardware Installation Guide - Page 11
device uses a power adapter: - If you were not provided with a power adapter, contact your local NETGEAR reseller. - The power adapter must be rated for the product and for the voltage and current marked on follow your local and national wiring rules. Introduction 11 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 12
2 Hardware Overview This chapter describes the switch hardware features. The chapter includes the following sections: • Hardware description • Switch hardware interfaces 12 - Netgear GC110P | Hardware Installation Guide - Page 13
GC110P provides eight 10/100/1000BASE-T RJ-45 PoE ports and two dedicated Gigabit SFP fiber ports. Both models require DC power and come with an external power adapter. The following figures show the back panels. Figure 2. Back panel model GC110 Hardware Overview 13 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 14
Max or Fault LED (see LEDs on page 15) for model GC110P only. Recessed multi-function Reset button (see Multi-function Reset button on page 17). Model GC110. Eight independent 10/100/1000BASE-T RJ-45 ports, each with a an optional security cable. Hardware Overview 14 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 15
up to be managed by the NETGEAR Insight app. Off. The switch to the switch. PoE Max/Fault LED Model GC110P only Off. Sufficient (more than 7W of) status for Ethernet ports 1 to 8 for model GC110P only Off. The port is not delivering PoE up to be managed by the NETGEAR Insight app. Off. The switch - Netgear GC110P | Hardware Installation Guide - Page 16
connectivity All RJ-45 copper ports support autosensing. When you insert a cable duplex) of the attached device. All ports support a Category 5e (Cat 5e) cable (or all RJ-45 ports support Auto Uplink technology. This ports on model GC110P support Power over Ethernet switch supports the NETGEAR SFP - Netgear GC110P | Hardware Installation Guide - Page 17
4. Supported SFP NETGEAR Insight app to remove the switch from your network, press the Reset button for at least five seconds. The switch restarts and returns to its factory default settings. During this process, the Power LED lights amber. Hardware Overview 17 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 18
is designed to provide flexibility in configuring network connections. The switch can be used as your only network traffic-distribution device for PoE (on model GC110P) and non-PoE devices or with 10 Mbps, 100 Mbps, and 1 Gbps Ethernet and fiber hubs, routers, and switches. This chapter includes the - Netgear GC110P | Hardware Installation Guide - Page 19
equipment for surveillance and security PoE overview Model GC110P supports eight Power over Ethernet (PoE) ports. The higher-priority, lower-numbered PoE ports are supported first. Although a device is listed as Internet modem. In such a setup, you must connect one port on the switch - Netgear GC110P | Hardware Installation Guide - Page 20
and security purposes. In a small office or home office network, the blue network icon represents a router that is connected to an Internet modem. In such a setup, you must connect one port on the switch to a LAN port on the router. Applications 20 Hardware Installation - Netgear GC110P | Hardware Installation Guide - Page 21
2 Gbps bidirectional throughput. In a small office or home office network, the blue network icon represents a router that is connected to an Internet modem. In such a setup, you must connect one port on the switch to a LAN port on the router. Applications 21 Hardware Installation - Netgear GC110P | Hardware Installation Guide - Page 22
6. Sample desktop switching Line Color Purple Black Connection Internet router or gateway Network devices such as a server, computers, workstations, and a ReadyNAS Applications 22 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 23
4 Installation This chapter describes the installation procedures for the switch. Switch installation involves the steps described in the following sections: • Step 1: Prepare the site • Step 2: Protect against electrostatic discharge • Step 3: Unpack the switch • Step 4: Install the switch • - Netgear GC110P | Hardware Installation Guide - Page 24
you touch any of the electronic components. You can do so by periodically touching an unpainted metal surface on the switch. Installation 24 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 25
pads, and an antistatic grounding strap. Step 3: Unpack the switch The following figures show the package contents. Figure 7. Switch package contents model GC110 Letter a b c d e f Description GC110 switch Power cord Category 5e (Cat 5e) flat Ethernet cable Wall-mounting screws Installation - Netgear GC110P | Hardware Installation Guide - Page 26
GC110P Letter a b c d e f Description GC110P switch Power cord with adapter Category 5e (Cat 5e) flat Ethernet cable Wall-mounting screws Installation guide of the correct model • For model GC110, a DC power adapter localized to the country of sale. For model GC110P, a DC power adapter with a - Netgear GC110P | Hardware Installation Guide - Page 27
Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports • Wall-mounting screws • Installation guide • Rubber footpads for tabletop installation 5. If any item is missing or damaged, contact your local NETGEAR reseller for replacement Step 4: Install the switch You can install the switch on a flat - Netgear GC110P | Hardware Installation Guide - Page 28
holes on the bottom panel of the switch with the screws in the wall and mount the switch to the wall. Installation 28 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 29
the left). You can also mount the switch with the back panel facing right (the cables will be on the right). Installation 29 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 30
holes on the bottom panel of the switch with the screws in the wall and mount the switch to the wall. Installation 30 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 31
the switch to a pole or another surface. The bottom panel of the switch provides four mount holes that are VESA-compliant. Installation 31 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 32
one of the SFP ports of the switch. Note: Contact your NETGEAR reseller to purchase these modules. If you do not want to install to connect devices to the switch's RJ-45 ports. The switch supports Auto Uplink technology, which allows you to attach devices using either straight Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 33
not light, check to see that the DC power adapter is plugged in correctly and that the power source is good. Installation 33 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 34
more information about managing the switch, see the installation guide that came with the switch, the NETGEAR knowledge base articles at netgear.com/support, and the user manual, which you can download from netgear.com/support/download. Note: The switch's default IP address is 192.168.0.239 and its - Netgear GC110P | Hardware Installation Guide - Page 35
5 Troubleshooting This chapter provides information about troubleshooting the switch. The chapter includes the following sections: • Troubleshooting chart • PoE troubleshooting suggestions • Additional troubleshooting suggestions 35 - Netgear GC110P | Hardware Installation Guide - Page 36
Troubleshooting chart The following table lists symptoms, possible causes, and possible solutions for problems that might occur. Table 6. Troubleshooting is not yet discovered and activated through the NETGEAR Insight app. Make sure that the switch is Troubleshooting 36 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 37
. • Switch integrity. If necessary, verify the integrity of the switch by resetting it. To reset the switch, disconnect the DC power adapter from the switch and then reconnect the DC power adapter again. If the problem continues, contact NETGEAR Troubleshooting 37 Hardware Installation Guide - Netgear GC110P | Hardware Installation Guide - Page 38
does not support autonegotiation, the switch determines only the speed correctly, and the duplex mode defaults to half-duplex. The Gigabit Ethernet ports negotiate speed, duplex mode, and flow control if the attached device supports autonegotiation. Troubleshooting 38 Hardware Installation Guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
Hardware Installation Guide
Insight Managed 8-Port Gigabit Ethernet
Smart Cloud Switch with 2 SFP Fiber Ports
(and PoE on Model GC110P Only)
Models GC110 and GC110P
NETGEAR, Inc.
350 E. Plumeria Drive
April 2020
San Jose, CA 95134, USA
202-11953-02