Netgear GS108 User Guide
Netgear GS108 - Gigabit Ethernet Switch Manual
 |
UPC - 606449025163
View all Netgear GS108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS108 manual content summary:
- Netgear GS108 | User Guide - Page 1
notices of product and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR (For US & Canada only) For other countries see your Support Information card. E-mail: [email protected] Website: www.NETGEAR.com © 2002 by NETGEAR, Inc. All rights reserved. NETGEAR and Auto Uplink are - Netgear GS108 | User Guide - Page 2
8-Port Switch 10/100/1000 Mbps Gigabit Ethernet GS108 Installation Guide - Netgear GS108 | User Guide - Page 3
file servers and routers) at blazing Gigabit Ethernet speeds. The GS108 Gigabit Ethernet Switch enables you to build a small network that gives you 10, 100, or 1000 Mbps access to other devices on the network. It provides a full, dedicated 1000 (or 100, or 10 Mbps) connection between two devices. If - Netgear GS108 | User Guide - Page 4
8-Port 10/100/1000 Mbps Gigabit Ethernet Switch Wall-mount hardware Installation guide, warranty/registration card and support information card Power adapter When you open the box, verify that you received everything. The package includes: • 8-Port Gigabit Ethernet Switch GS108 • AC power adapter - Netgear GS108 | User Guide - Page 5
be at least 2 inches (5 cm) of clear space on all sides of the switch. • Well ventilated (especially if it is in a closet). Also, you'll need one Category 5 (Cat 5) Ethernet cable with RJ-45 connectors for each device you want to connect to the switch. Each Ethernet cable must be less than 328 feet - Netgear GS108 | User Guide - Page 6
/100/1000 Mbps Gigabit Switch GS108 10M: On=Link, Blink=Act 1 2 3 4 5 6 7 8 1000M 100M On=Link, Blink=Act Link LED for each Pwr Green=FDX, Yellow=Collision 1 2 3 4 5 6 7 8 connected and Model GS108 8-Port 10/100/1000 Mbps Gigabit Ethernet Switch powered device should light and flash - Netgear GS108 | User Guide - Page 7
socket is controlled by a light switch, make sure the switch is in the on position. • Make sure you are using the NETGEAR power adapter supplied with your switch. The Port number light is not lit for a connected device or stays on continuously There's a hardware connection problem. • Make sure the - Netgear GS108 | User Guide - Page 8
of the Manufacturer/Importer It is hereby certified that the NETGEAR Model GS108 Gigabit Ethernet Switch has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test transmitters) in accordance with
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Technical Support
Please refer to the Support Information card that shipped with your product.
By registering your product at www.NETGEAR.com/register, we can provide you with faster
expert technical support and timely notices of product and software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only)
For other countries see your Support Information card.
E-mail: [email protected]
Website: www.NETGEAR.com
© 2002 by NETGEAR, Inc. All rights reserved.
NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. in the United States and/or
other countries.
Other brand and product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice.
M-GS108NA-0