Netgear GS108Tv3 Hardware Installation Guide
Netgear GS108Tv3 Manual
 |
View all Netgear GS108Tv3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS108Tv3 manual content summary:
- Netgear GS108Tv3 | Hardware Installation Guide - Page 1
Hardware Installation Guide 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Models GS108Tv3 GS110TPv3 GS110TPP March 2020 202-11991-02 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA - Netgear GS108Tv3 | Hardware Installation Guide - Page 2
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community. - Netgear GS108Tv3 | Hardware Installation Guide - Page 3
instructions and warnings 10 Chapter 2 Hardware Overview Hardware overview of model GS108Tv3 14 Model GS108Tv3: Front panel with ports and LEDs 14 Model GS108Tv3: Back panel 14 Model GS108Tv3 Reset button 21 Chapter 3 Applications Desktop switching 23 PoE overview 24 PoE and desktop switching - Netgear GS108Tv3 | Hardware Installation Guide - Page 4
GS110TPv3 37 Step 6: Connect devices to the switch 37 Step 7: Check the installation 38 Step 8: Apply power and check the LEDs 38 Step 9: Manage the switch 39 Chapter 5 Troubleshooting Troubleshooting chart 42 PoE troubleshooting suggestions 43 Additional troubleshooting suggestions 44 4 - Netgear GS108Tv3 | Hardware Installation Guide - Page 5
instructions and warnings Note: For more information about the topics that are covered in this manual, visit the support website at netgear.com/support/. Note: For technical specifications, see the data sheet at netgear.com/business/products/switches/smart/. For switch documentation, visit netgear - Netgear GS108Tv3 | Hardware Installation Guide - Page 6
descriptions This guide describes the following NETGEAR Smart Managed Pro Switches: • GS108Tv3. 8-Port Gigabit Ethernet Smart Managed Pro Switch with Cloud Management On model GS110TPP, RJ-45 ports 1 through 8 support PoE+ so that the switch can provide PoE power to PoE devices. Model GS110TPP - Netgear GS108Tv3 | Hardware Installation Guide - Page 7
-based management interface (in this guide referred to as the local browser interface). In this mode, you can change all settings of the switch. For more information about the local browser interface, see the user manual, which you can download from netgear.com/support/download/. Note: If you plan - Netgear GS108Tv3 | Hardware Installation Guide - Page 8
management, monitor the switch, analyze the switch and network usage, and, if necessary, troubleshoot the switch and the network. For more information about NETGEAR Insight, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support. By default, the management mode - Netgear GS108Tv3 | Hardware Installation Guide - Page 9
10/100/1000BASE copper uplink ports (model GS110TPP) • PoE PD support (model GS108Tv3), so that the switch can receive PoE power and you can use the switch without a power adapter. • PoE support (models GS110TPv3 and GS110TPP), so that the switch can provide PoE power to PoE devices: - 8 PoE+ (802 - Netgear GS108Tv3 | Hardware Installation Guide - Page 10
Pro Switch with Auto Uplink technology is supported on all ports. • Max LED (models GS110TPv3 and GS110TPP). • NETGEAR green power-saving features: - Energy efficiency the port link is down Safety instructions and warnings Use the following safety NETGEAR product, which might not be covered by NETGEAR - Netgear GS108Tv3 | Hardware Installation Guide - Page 11
Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management • Observe and follow service markings: - Do not service any product the system gets wet, see the appropriate section in your troubleshooting guide, or contact your trained service provider. • Do not push any objects into the - Netgear GS108Tv3 | Hardware Installation Guide - Page 12
Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports power adapter: - If you were not provided with a power adapter, contact your local NETGEAR reseller. - The power adapter must be rated for the product and for the voltage . Introduction 12 Hardware Installation Guide - Netgear GS108Tv3 | Hardware Installation Guide - Page 13
chapter describes the switch hardware features. The chapter includes the following sections: • Hardware overview of model GS108Tv3 • Hardware overview of model GS110TPv3 • Hardware overview of model GS110TPP • RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity • Multi-function Reset button 13 - Netgear GS108Tv3 | Hardware Installation Guide - Page 14
GS108Tv3 provides the following components: • Power LED (see Model GS108Tv3: LEDs on page 15). • Recessed Reset button (see Multi-function Reset that you can you use the switch without a power adapter. Model GS108Tv3: Back panel The back panel of model GS108Tv3 contains a Kensington lock slot for an - Netgear GS108Tv3 | Hardware Installation Guide - Page 15
Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management Model GS108Tv3: LEDs This section describes the LED designations of model GS108Tv3. Table 1. Model GS108Tv3 LEDs on the front 3. Model GS110TPv3 front panel Hardware Overview 15 Hardware Installation Guide - Netgear GS108Tv3 | Hardware Installation Guide - Page 16
Managed Pro Switch with (2 SFP that is, not yellow) in the previous figure. • Recessed Reset button (see Multi-function Reset button on page 21). • Eight independent 10/100/1000BASE-T RJ adapter with detachable power cable that came in the switch package. The following figure shows the back panel of - Netgear GS108Tv3 | Hardware Installation Guide - Page 17
LED Solid green. The switch is powered on and operating normally. Solid yellow. The switch is booting. Off. Power is not supplied to the switch. PoE Max LED Off the switch. Model GS110TPv3 supports the NETGEAR SFP transceiver modules that are listed in the following table. Table 3. Supported SFP - Netgear GS108Tv3 | Hardware Installation Guide - Page 18
Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports ), which is off (that is, not yellow) in the previous figure. • Recessed Reset button (see Multi-function Reset button on page 21). • Eight independent 10/100/1000BASE-T RJ-45 PoE+ ports 18 Hardware Installation Guide - Netgear GS108Tv3 | Hardware Installation Guide - Page 19
for the DC power adapter with detachable power cable that came in the switch package. By default, the switch comes with a 130V power adapter that provides 54V, 2.4A. You can purchase and connect the NETGEAR optional power adapter model EPS200W, which provides 54V, 3.7A. The following figure shows - Netgear GS108Tv3 | Hardware Installation Guide - Page 20
ports support autosensing. When you insert a cable into an RJ-45 port, the switch all RJ-45 ports support Auto Uplink technology. into the switch's RJ-45 port, the switch automatically performs the port to a router, switch, or hub). • Automatically port 1 on model GS108Tv3 can function as a PoE - Netgear GS108Tv3 | Hardware Installation Guide - Page 21
and not reset. • Reset the switch to factory default settings and reset the registration status. All settings are erased, the switch restarts with factory default settings, and the NETGEAR registration status is reset. You must reregister the switch with NETGEAR. To restart or reset the switch using - Netgear GS108Tv3 | Hardware Installation Guide - Page 22
device for PoE and non-PoE devices or with 10 Mbps, 100 Mbps, and 1 Gbps Ethernet and fiber hubs, routers, access points, and other switches. This chapter includes the following sections: • Desktop switching • PoE overview • PoE and desktop switching • Hi-power PoE for surveillance and security 22 - Netgear GS108Tv3 | Hardware Installation Guide - Page 23
use NETGEAR Insight to discover and manage the switch. On model GS108Tv3, port 1 is a PoE PD port that can receive PoE power from a PoE switch so that you can use model GS108Tv3 without a power adapter. On model GS110TPv3, you can also make a 1 Gbps fiber connection to a router that supports fiber - Netgear GS108Tv3 | Hardware Installation Guide - Page 24
NETGEAR Insight app to discover and manage the switch. 6 PoE switch, which can provide PoE power to 12 Smart TV model GS108Tv3. PoE overview Models GS110TPv3 and GS110TPP supports switch is also compatible with PoE (IEEE 802.3af). Note: Model GS110TPP supports NETGEAR switch, supported switch - Netgear GS108Tv3 | Hardware Installation Guide - Page 25
.0W 12.95W-25.5W For more information about PoE, see the installation guide and user manual, both of which you can download from netgear.com/support/download/. PoE and desktop switching Models GS110TPv3 and GS110TPP support both PoE and non-PoE equipment. The following figure shows an example of - Netgear GS108Tv3 | Hardware Installation Guide - Page 26
switch. 5 Smartphone, which allows you use NETGEAR 11 Desktop Insight to discover and manage the switch. 6 PoE WiFi access point 11 Desktop Hi-power PoE for surveillance and security Models GS110TPv3 and GS110TPP support 8) to the switch. You must connect one LAN port on the switch to a LAN - Netgear GS108Tv3 | Hardware Installation Guide - Page 27
Insight to discover and manage the switch. 6 Laptop, which, as an Insight Premium or Insight Pro subscriber, allows you to use the NETGEAR Insight Cloud portal to manage the switch. 7 PoE+ Pan-tilt-zoom (PTZ) cameras 8 ReadyNAS storage system Applications 27 Hardware Installation Guide - Netgear GS108Tv3 | Hardware Installation Guide - Page 28
involves the steps described in the following sections: • Step 1: Prepare the site • Step 2: Protect against electrostatic discharge • Step 3: Unpack the switch • Step 4: Install the switch • Optional Step 5: Install SFP transceiver modules (model GS110TPv3) • Step 6: Connect devices to the - Netgear GS108Tv3 | Hardware Installation Guide - Page 29
switch to attach the switch to a wall. Pole (or other surface) installations. Use an off-the-shelf 75 mm (model GS108Tv3 air inlets on the sides of the switch. Keep at least 2 inches (5.08 centimeters) you install the switch must provide adequate airflow. Operating conditions. Keep the switch at least 6 - Netgear GS108Tv3 | Hardware Installation Guide - Page 30
components inside your switch. To prevent static unpainted metal surface on the switch. You can also take 3: Unpack the switch Check the contents of the boxes present before installing the switch. To check the following items: • Model GS108Tv3: - Switch model GS108Tv3 - DC power adapter - Netgear GS108Tv3 | Hardware Installation Guide - Page 31
power cable (varies by region) - Wall-mount kit - Four rubber footpads - Installation guide 5. If any item is missing or damaged, contact your local NETGEAR reseller for replacement. Step 4: Install the switch You can install the switch on a flat surface or attach it to a wall. You can also use any - Netgear GS108Tv3 | Hardware Installation Guide - Page 32
GS108Tv3 horizontally to a wall: 1. Locate the two holes on the bottom panel of the switch and anchors are in the switch package. 4. Insert the anchors switch. 5. Line up the holes on the bottom panel of the switch with the screws in the wall and mount the switch to the wall. You can mount the switch - Netgear GS108Tv3 | Hardware Installation Guide - Page 33
GS108Tv3 vertically to a wall: 1. Locate the two holes on the bottom panel of the switch and anchors are in the switch package. 4. Insert the anchors switch. 5. Line up the holes on the bottom panel of the switch with the screws in the wall and mount the switch to the wall. You can mount the switch - Netgear GS108Tv3 | Hardware Installation Guide - Page 34
switch provides two VESA mount holes that allow you to mount the switch to a wall. The switch panel of the switch. Figure 11. switch. 2. Mark the two mounting holes on the wall where you want to mount the switch . The screws and anchors are in the switch package. 4. Insert the anchors into the wall - Netgear GS108Tv3 | Hardware Installation Guide - Page 35
mounting holes on the wall where you want to mount the switch. The two mounting holes must be at a precise horizontal distance of 2.95 in. (75 mm) from each other. 3. Drill holes into the wall for two anchors in which you will insert M4 x L25 mm screws. Installation 35 Hardware Installation Guide - Netgear GS108Tv3 | Hardware Installation Guide - Page 36
figure on the right). Both figures show the top panel of the switch, with the VESA holes at the bottom shown transparently. Mount the switch to a pole or another surface You can use an off-the-shelf 75 mm (model GS108Tv3) or 100 mm (model GS110TPv3 or model GS110TPP) VESA standard mount to - Netgear GS108Tv3 | Hardware Installation Guide - Page 37
: Contact your NETGEAR sales office to switch and the attached device to 328 feet (100 meters). For distances up to 328 feet with traffic at 1 Gbps speed, use a Cat 5e or higher-rated cable. Model GS108Tv3 can function as a PoE powered device (PD) device but does not provide PoE power. It supports - Netgear GS108Tv3 | Hardware Installation Guide - Page 38
EPS200W, after the switch starts for the first time with the new power adapter, log in to the local browser interface, and select the new power adapter. For more information, see the user manual, which you can download from netgear.com/support/download. Installation 38 Hardware Installation Guide - Netgear GS108Tv3 | Hardware Installation Guide - Page 39
the switch IP address in your network, see the user manual, which you can download from netgear.com/support/download/. For more information about NETGEAR Insight, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support. For very basic setup and management - Netgear GS108Tv3 | Hardware Installation Guide - Page 40
SFP or 2 Copper Ports and) Cloud Management Note: By default, the DHCP client of the switch is enabled. If the switch cannot get an IP address from a DHCP server, the switch's default IP address is 192.168.0.239 and the default subnet mask is 255.255.255.0. Installation 40 Hardware Installation - Netgear GS108Tv3 | Hardware Installation Guide - Page 41
5 Troubleshooting This chapter provides information about troubleshooting the switch. The chapter includes the following sections: • Troubleshooting chart • PoE troubleshooting suggestions • Additional troubleshooting suggestions 41 - Netgear GS108Tv3 | Hardware Installation Guide - Page 42
Switch with (2 SFP or 2 Copper Ports and) Cloud Management Troubleshooting chart The following table lists symptoms, possible causes, and possible solutions for problems that might occur. Table 7. Troubleshooting equipment was accidentally disconnected. Model GS108Tv3. The left and right port LEDs - Netgear GS108Tv3 | Hardware Installation Guide - Page 43
Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management PoE troubleshooting suggestions Here are some tips for correcting PoE problems that might occur switch permits. Restart the switch to see if the condition resolves itself. Troubleshooting 43 Hardware Installation Guide - Netgear GS108Tv3 | Hardware Installation Guide - Page 44
the integrity of the switch by resetting it. To reset the switch, disconnect the DC power from the switch and then reconnect the DC power. If the problem continues, contact NETGEAR technical support. For more information, visit the support website at netgear.com/support/. • Autonegotiation. The RJ
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
Hardware Installation Guide
8-Port Gigabit (PoE+) Ethernet
Smart Managed Pro Switch with
(2 SFP or 2 Copper Ports and)
Cloud Management
Models
GS108Tv3
GS110TPv3
GS110TPP
NETGEAR, Inc.
350 E. Plumeria Drive
March 2020
San Jose, CA 95134, USA
202-11991-02