Netgear GS308EPP User Manual

Netgear GS308EPP Manual

Get Netgear GS308EPP PDF manuals and user guides View all Netgear GS308EPP manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear GS308EPP manual content summary:

  • Netgear GS308EPP | User Manual - Page 1
    User Manual Gigabit Ethernet Plus Switches Models • GS305EP • GS305EPP • GS308EP • GS308EPP January 2021 202-12193-02 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA
  • Netgear GS308EPP | User Manual - Page 2
    Gigabit Ethernet Plus Switches Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal Si ce produit est vendu au Canada, vous
  • Netgear GS308EPP | User Manual - Page 3
    Chapter 1 Hardware Related documentation 7 Switch package contents 7 Supported switch models 7 Model GS305EP, GS305EPP, GS308EP, GS308EPP LEDs 7 Switch label 8 Safety instructions and warnings 9 Chapter 2 Install and Access the Switch in Your Network Set up the switch in your network and power
  • Netgear GS308EPP | User Manual - Page 4
    addresses 63 Manage IGMPv3 IP header validation 64 Set up a static router port for IGMP snooping 65 Change the IP address of the switch 66 Reenable the DHCP client of the switch 67 Chapter 6 Maintain and Monitor the Switch Manually check for new switch firmware and update the switch..69 4
  • Netgear GS308EPP | User Manual - Page 5
    for switches that support PoE 80 Manage the PoE ports 80 Display PoE port status 83 Power cycle the PoE ports 84 Chapter 7 Diagnostics and Troubleshooting Test cable connections 87 Resolve a subnet conflict to access the switch 87 PoE troubleshooting suggestions 88 Appendix A Factory Default
  • Netgear GS308EPP | User Manual - Page 6
    Switch package contents • Supported switch models • Model GS305EP, GS305EPP, GS308EP, GS308EPP LEDs • Switch label • Safety instructions and warnings Note: This user manual complements the installation guide that came with your switch. You can also download the installation guide by visiting netgear
  • Netgear GS308EPP | User Manual - Page 7
    guide. Supported switch models The Gigabit Ethernet Plus Switches User Manual describes the switch models listed in the following table. Table 1. Supported switch models Model GS305EP GS305EPP GS308EP GS308EPP Name 5-Port Gigabit Ethernet Plus Switch with PoE+ 5-Port Gigabit Ethernet Plus Switch
  • Netgear GS308EPP | User Manual - Page 8
    Solid green: The port is delivering PoE power. Off: The port is not delivering PoE power. Solid yellow: A PoE fault occurred. Switch label The switch label on the bottom panel of the switch shows the serial number, MAC address, and default login information of the switch. Hardware 8 User Manual
  • Netgear GS308EPP | User Manual - Page 9
    Plus Switches 5-Port Gigabit Ethernet Smart Managed Plus Switch with PoE Model/型號:GS305EP D38488 RoHS R-R-NGR-20300504 NETGEAR DEFAULT ACCESS http://192.168.0.239 password: password Input /輸入: 54V 1.25A SERIAL NUMBER MAC 272-13639-01 Made in Thailand NETGEAR,INC. Safety instructions
  • Netgear GS308EPP | User Manual - Page 10
    Gigabit Ethernet Plus Switches • Observe and follow service markings: - Do not service any product except as explained in If the product gets wet, see the appropriate section in your troubleshooting guide, or contact your trained service provider. • Do not push any objects into the openings of your
  • Netgear GS308EPP | User Manual - Page 11
    Gigabit Ethernet Plus Switches • Be sure that attached devices are power adapter: - If you were not provided with a power adapter, contact your local NETGEAR reseller. - The power adapter must be rated for the product and for the voltage and and national wiring rules. Hardware 11 User Manual
  • Netgear GS308EPP | User Manual - Page 12
    • Set up the switch in your network and power on the switch • Methods to discover or access the switch • Access the switch and discover the IP address of the switch • Set up a fixed IP address for the switch • Change the language of the device UI • Change the switch password • Register the switch 12
  • Netgear GS308EPP | User Manual - Page 13
    the switch in your network and access the device UI of the switch: • Access the switch from a Mac or Windows-based computer using the NETGEAR Switch Discovery Tool on page 14. • Set up a fixed IP address for the switch on page 15. Install and Access the Switch in 13 Your Network User Manual
  • Netgear GS308EPP | User Manual - Page 14
    or a Windows-based computer. To install the NSDT, discover the switch in your network, access the switch, and discover the switch IP address: 1. Download the NSDT by visiting netgear.com/support/product/netgear-switch-discovery-tool.aspx. Download either the Mac or Windows version. 2. Temporarily
  • Netgear GS308EPP | User Manual - Page 15
    Gigabit Ethernet Plus Switches If the NETGEAR Switch Discovery Tool switch, the tool displays the IP address. 10. To access the device UI of the switch, click the ADMIN PAGE button. The login page of the device UI opens. 11. Enter the switch password. The default password is password. The password
  • Netgear GS308EPP | User Manual - Page 16
    web browser from a computer that is connected to the same network as the switch. 2. Enter the IP address that is assigned to the switch. The login page displays. 3. Enter the switch password. The default password is password. The password is case-sensitive. The HOME page displays. The right pane (or
  • Netgear GS308EPP | User Manual - Page 17
    from your computer to an Ethernet port on the switch. 2. Change the IP address of your computer to be in the same subnet as the default IP address of the switch. The default IP address of the switch is 192.168.0.239. This means that you must change the IP address of the computer to be on the same
  • Netgear GS308EPP | User Manual - Page 18
    Ethernet Plus Switches 5. Enter the switch password. The default password is password. The password is case-sensitive. The HOME page displays. The right pane (or, depending on the size of your browser window, the middle pane) shows the IP address that is assigned to the switch. 6. Select IP Address
  • Netgear GS308EPP | User Manual - Page 19
    is connected to the same network as the switch or to the switch directly through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. The login page displays. 3. Enter the switch password. The default password is password. The password is case-sensitive. The HOME page displays
  • Netgear GS308EPP | User Manual - Page 20
    saved. Keep the new password in a secure location so that you can access the switch in the future. Register the switch Registering the switch allows you to receive email alerts and streamlines the technical support process. You can log in to your NETGEAR account at my.netgear.com to register your
  • Netgear GS308EPP | User Manual - Page 21
    3 Optimize the Switch Performance This chapter describes how you can optimize the performance of the switch. The chapter contains the following sections: • Set the quality of service mode and port rate limits • Manage individual port settings 21
  • Netgear GS308EPP | User Manual - Page 22
    Gigabit Ethernet Plus Switches Set the quality of service mode and port rate limits You can manually set the Quality of Service (QoS) modes to activity, and other problems. Use port-based quality of service and set port priorities 802.1P/DSCP is the default QoS mode on the switch, but you can also
  • Netgear GS308EPP | User Manual - Page 23
    The password is case-sensitive. The HOME page displays. 4. From the menu at the top of the page, select SWITCHING > QOS . The Quality of Service ( , Medium, High, or Critical from the individual menu for the port. The default selection is High. d. Click the APPLY button. Your settings are saved and
  • Netgear GS308EPP | User Manual - Page 24
    the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. From the menu at the top of the page, select SWITCHING > QOS . The Quality of Service (QoS) page displays. 5. If the selection from the QoS Mode menu is Port-based, do the
  • Netgear GS308EPP | User Manual - Page 25
    port. The default selection is No problems. However, you can block broadcast storms on the switch switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password
  • Netgear GS308EPP | User Manual - Page 26
    Plus Switches The Quality of Service individual menu for the port. The default selection is No Limit. d. Click the outgoing traffic, set the port speed (by default, the speed is set automatically), enable much bandwidth on the switch. Rate limiting simply means that the switch slows down all traffic
  • Netgear GS308EPP | User Manual - Page 27
    Plus Switches set the rate limit on a port too low, you might, for example, see degraded video stream quality, sluggish response times during online activity, and other problems. You also can set port rate limits (the same feature) as part of the Quality of Service configuration on the switch
  • Netgear GS308EPP | User Manual - Page 28
    that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time
  • Netgear GS308EPP | User Manual - Page 29
    that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time
  • Netgear GS308EPP | User Manual - Page 30
    . 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The default password is password. The password is case
  • Netgear GS308EPP | User Manual - Page 31
    Plus Switches switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password the switch is Port-based (the default setting), Switch 31 Performance User Manual
  • Netgear GS308EPP | User Manual - Page 32
    how you can use VLANs to segment traffic on the switch. The chapter contains the following sections: • VLAN overview • Activate the Basic Port-Based VLAN mode and assign VLANs • Manage advanced port-based VLANs • Manage basic 802.1Q VLANs • Manage advanced 802.1Q VLANs • Deactivate a port-based or
  • Netgear GS308EPP | User Manual - Page 33
    port or you do need a voice VLAN, use the advanced 802.1Q VLAN configuration. The switch supports the following 802.1Q VLAN modes: - Basic 802.1Q VLAN. In a basic 802.1Q VLAN configuration, VLAN 1 is added to the switch and all ports (1 through 5 for the GS305EP or GS305EPP, and 1 through 8 for the
  • Netgear GS308EPP | User Manual - Page 34
    The following table provides an overview of VLAN features that are supported on the switch. Table 3. Supported VLAN modes for the GS305EP and GS305EPP VLAN Feature Total number of VLANs Egress tagging Multiple VLANs on a single port Voice VLAN Basic Port-Based VLAN 5 No No No Advanced Port-Based
  • Netgear GS308EPP | User Manual - Page 35
    Gigabit Ethernet Plus Switches Table 4. Supported VLAN modes for the GS308EP and GS308EPP (Continued) VLAN Feature Multiple VLANs on a single port Voice VLAN Basic Port-Based VLAN No No Advanced Port-Based VLAN Yes No Basic 802.1Q VLAN Advanced 802.1Q VLAN Yes (trunk port only) Yes No Yes
  • Netgear GS308EPP | User Manual - Page 36
    the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. Use VLANS for Traffic 36 Segmentation User Manual
  • Netgear GS308EPP | User Manual - Page 37
    configuration lets you create VLANs and assign ports on the switch to a VLAN. The number of VLANs is limited to the number of ports on the switch. In an advanced port-based VLAN configuration, one port can be a member of multiple VLANs. By default, all ports are members of VLAN 1, but you can change
  • Netgear GS308EPP | User Manual - Page 38
    based VLAN: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is
  • Netgear GS308EPP | User Manual - Page 39
    a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. Use VLANS for Traffic 39 Segmentation User Manual
  • Netgear GS308EPP | User Manual - Page 40
    on the switch. When you activate the Basic 802.1Q VLAN mode, VLAN 1 is added to the switch and all ports function in access mode (rather than trunk mode) as untagged members of VLAN 1. This is the default VLAN in the Basic 802.1Q VLAN mode. Use VLANS for Traffic 40 Segmentation User Manual
  • Netgear GS308EPP | User Manual - Page 41
    .1Q VLAN mode: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password
  • Netgear GS308EPP | User Manual - Page 42
    Ethernet Plus Switches To create a basic 802.1Q VLAN and assign ports as members: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login
  • Netgear GS308EPP | User Manual - Page 43
    Gigabit Ethernet Plus Switches 7. For a port that functions in access mode, to add a VLAN by using the VLAN menu for the individual port, do the following: a. From the VLAN menu for the individual port, select Add VLAN. The BASIC 802.1Q VLAN pop-up window opens. b. In the VLAN Name field, enter a
  • Netgear GS308EPP | User Manual - Page 44
    a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. Use VLANS for Traffic 44 Segmentation User Manual
  • Netgear GS308EPP | User Manual - Page 45
    the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. From the menu at the top of the page, select SWITCHING. The QOS page displays. 5. From the menu on the left, select VLAN. The VLAN page displays. By default, the Port Configuration tab is selected and the
  • Netgear GS308EPP | User Manual - Page 46
    .1Q VLAN: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is
  • Netgear GS308EPP | User Manual - Page 47
    default VLAN: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password
  • Netgear GS308EPP | User Manual - Page 48
    Gigabit Ethernet Plus Switches 8. To change the port tagging for the default VLAN (VLAN 1), do the following: a. In the table, click 1 or Default (you can click anywhere in the row for VLAN 1). b. Click the EDIT button. c. Select the port tags and whether ports are members of the VLAN through a
  • Netgear GS308EPP | User Manual - Page 49
    802.1Q VLAN: 1. Open a web browser from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. Use VLANS for Traffic 49 Segmentation User Manual
  • Netgear GS308EPP | User Manual - Page 50
    802.1Q VLAN pane. Specify a port PVID for an advanced 802.1Q VLAN A default port VLAN ID (PVID) is a VLAN ID tag that the switch assigns to incoming data packets that are not already addressed (tagged) for a particular VLAN. For example, if Use VLANS for Traffic 50 Segmentation User Manual
  • Netgear GS308EPP | User Manual - Page 51
    that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time
  • Netgear GS308EPP | User Manual - Page 52
    Gigabit Ethernet Plus Switches The Advanced 802.1Q VLAN pane displays. Set an existing advanced 802.1Q VLAN as the voice VLAN and adjust the CoS value The switch can support a single advanced 802.1Q VLAN as the voice VLAN to facilitate voice over IP (VoIP) traffic. Because a voice VLAN might
  • Netgear GS308EPP | User Manual - Page 53
    Plus Switches 8. In the Voice VLAN section, click the button so that the button bar display green. The VLAN is selected to be set as the voice VLAN. 9. From the Class of Service menu, select a CoS value. A value of 0 is the lowest priority and a value of 7 is the highest priority. The default
  • Netgear GS308EPP | User Manual - Page 54
    Gigabit Ethernet Plus Switches The VLAN page displays. 6. In the table in the right pane, click Advanced 802.1Q VLAN. 7. Click the EDIT button. 8. In the OUI Table section, click the OUI Settings link. The Voice VLAN pane displays and shows the OUI table. 9. To add a new OUI, do the following: a.
  • Netgear GS308EPP | User Manual - Page 55
    the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. Use VLANS for Traffic 55 Segmentation User Manual
  • Netgear GS308EPP | User Manual - Page 56
    Ethernet Plus Switches 4. From the menu at the top of the page, select SWITCHING. The QOS page displays. 5. From the menu on the left, select VLAN. The VLAN page displays. 6. In the NO VLANs section, click the ACTIVATE MODE button. A pop-up window opens, informing you that the current VLAN settings
  • Netgear GS308EPP | User Manual - Page 57
    in Your Network This chapter describes how you can manage the switch in your network. The chapter contains the following sections: • Manage NETGEAR Switch Discovery Protocol • Set up static link aggregation • Manage multicast • Change the IP address of the switch • Reenable the DHCP client of the
  • Netgear GS308EPP | User Manual - Page 58
    Plus Switches Manage NETGEAR Switch Discovery Protocol A NETGEAR device or application that supports NETGEAR Switch Discovery Protocol (NSDP) can discover the switch in the network so that you can find the switch IP address and log in to the device UI of the switch. NSDP is enabled by default
  • Netgear GS308EPP | User Manual - Page 59
    is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. From the menu at the top of the page, select SWITCHING. The Quality of Service (QoS) page displays. 5. From the menu on the left, select LINK AGGREGATION. The LINK AGGREGATION
  • Netgear GS308EPP | User Manual - Page 60
    Gigabit Ethernet Plus Switches A LAG must consist of at least two ports, but can consist of all ports. The number of LAGs that the switch supports depends on the model. 7. Click the APPLY button. Your enable the LAG on the other network device. Manage the Switch in Your 60 Network User Manual
  • Netgear GS308EPP | User Manual - Page 61
    is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. From the menu at the top of the page, select SWITCHING > QOS . The Quality of Service (QoS) page displays. 5. From the menu on the left, select LINK AGGREGATION. The LINK
  • Netgear GS308EPP | User Manual - Page 62
    an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. Manage the Switch in Your 62 Network User Manual
  • Netgear GS308EPP | User Manual - Page 63
    Ethernet Plus Switches The HOME page displays. 4. From the menu at the top of the page, select SWITCHING > QOS . The Quality of Service (QoS) page displays. 5. From the menu on the left, select MULTICAST. The MULTICAST page displays. 6. In the VLAN ID Enabled for IGMP Snooping section, enter a VLAN
  • Netgear GS308EPP | User Manual - Page 64
    header validation so that the switch inspects whether IGMPv3 packets conform to the IGMPv3 standard. By default, IGMPv3 IP header validation is disabled. If IGMPv3 IP header validation is enabled, IGMPv3 messages must include a time-to-live (TTL) value of 1 and a type of service (ToS) byte of 0xC0
  • Netgear GS308EPP | User Manual - Page 65
    is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. From the menu at the top of the page, select SWITCHING. The Quality of Service (QoS) page displays. 5. From the menu on the left, select MULTICAST. The MULTICAST page displays
  • Netgear GS308EPP | User Manual - Page 66
    Gigabit Ethernet Plus Switches Change the IP address of the switch By default, the switch receives an IP address from a DHCP server (or a router that functions as a DHCP server) in your network. To disable the DHCP client of the switch and change the IP address of the switch to a fixed IP address:
  • Netgear GS308EPP | User Manual - Page 67
    that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time
  • Netgear GS308EPP | User Manual - Page 68
    chapter describes how you can maintain and monitor the switch. The chapter contains the following sections: • Manually check for new switch firmware and update the switch • Manage the configuration file • Return the switch to its factory default settings • Control access to the device UI • Change or
  • Netgear GS308EPP | User Manual - Page 69
    Gigabit Ethernet Plus Switches Manually check for new switch firmware and update the switch You can manually check for the latest firmware version, download the firmware, and upload it to the switch. If firmware release notes are available with new firmware, read the release notes to find out if you
  • Netgear GS308EPP | User Manual - Page 70
    that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time
  • Netgear GS308EPP | User Manual - Page 71
    that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time
  • Netgear GS308EPP | User Manual - Page 72
    the reset function in the device UI. However, if you changed and lost the password and cannot access the switch, you must use the RESET button. After you reset the switch to factory default settings, the password is password and the switch's DHCP client is enabled. For more information, see Factory
  • Netgear GS308EPP | User Manual - Page 73
    that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time
  • Netgear GS308EPP | User Manual - Page 74
    Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. Maintain and Monitor the Switch 74 User Manual
  • Netgear GS308EPP | User Manual - Page 75
    is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the switch password. The default password is password. The password is case-sensitive. The HOME page
  • Netgear GS308EPP | User Manual - Page 76
    Plus Switches to support switch detects an incoming signal and restores normal power. By default switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password
  • Netgear GS308EPP | User Manual - Page 77
    from a computer that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. Maintain and Monitor the Switch 77 User Manual
  • Netgear GS308EPP | User Manual - Page 78
    that is connected to the same network as the switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time
  • Netgear GS308EPP | User Manual - Page 79
    switch, or connected directly to the switch through an Ethernet cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password If the QoS mode on the switch is port-based (the default setting), the Priority field displays on
  • Netgear GS308EPP | User Manual - Page 80
    Gigabit Ethernet Plus Switches PoE considerations for switches that support PoE A switch that supports Power over Ethernet (PoE) prioritizes the PoE power that it supplies in ascending port order (that is, from the lowest-numbered port to the highest-numbered port), up to its total power
  • Netgear GS308EPP | User Manual - Page 81
    update. However, note the following situations during which the switch temporarily stops providing PoE: • The switch reboots because you reset it to factory default settings. • The switch reboots because you upgrade the switch firmware with a change in the configuration structure, an update to
  • Netgear GS308EPP | User Manual - Page 82
    to the value that is specified in the Power Limit (W) field. This is the default setting. Note: If a PD doesn't report its class correctly, these options can preserve PoE power by preventing the switch from delivering more power than the PD requires. However, depending on which option you select
  • Netgear GS308EPP | User Manual - Page 83
    cable. 2. Enter the IP address that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. Select POE. The Power over Ethernet
  • Netgear GS308EPP | User Manual - Page 84
    that is assigned to the switch. A login window opens. 3. Enter the device management password. The password is the one that you specified the first time that you logged in. The password is case-sensitive. The HOME page displays. 4. Select POE. Maintain and Monitor the Switch 84 User Manual
  • Netgear GS308EPP | User Manual - Page 85
    Plus Switches The Power over Ethernet (PoE) page displays. 5. Forcibly reset a PoE port by clicking the port number. When the port is selected, the port button displays solid purple. 6. Click the APPLY button. The PoE on the port is forcibly reset. Maintain and Monitor the Switch 85 User Manual
  • Netgear GS308EPP | User Manual - Page 86
    7 Diagnostics and Troubleshooting This chapter covers the following topics: • Test cable connections • Resolve a subnet conflict to access the switch • PoE troubleshooting suggestions 86
  • Netgear GS308EPP | User Manual - Page 87
    another cable test if desired. Resolve a subnet conflict to access the switch If you power on the switch before you connect it to a network that includes a DHCP server, the switch uses its own default IP address of 192.168.0.239. This subnet might Diagnostics and 87 Troubleshooting User Manual
  • Netgear GS308EPP | User Manual - Page 88
    DHCP server discovers the switch and assigns it an IP address that is in the correct subnet for the network. PoE troubleshooting suggestions Here are some tips for correcting Power over Ethernet (PoE) problems that might occur on switches that support PoE: • Make sure that the PoE Max LED is off
  • Netgear GS308EPP | User Manual - Page 89
    A Factory Default Settings and Technical Specifications This appendix contains the following sections: • Factory default settings • Technical specifications 89
  • Netgear GS308EPP | User Manual - Page 90
    resets and returns to the factory settings that are shown in the following table. Table 7. Factory default settings Feature Switch password IP address Subnet mask DHCP mode IGMP snooping LAGs VLANs 802.1p/DSCP-based QoS Port-based QoS Rate limiting Broadcast filtering Loop detection Port speed
  • Netgear GS308EPP | User Manual - Page 91
    B, CE Class B, VCCI Class B, BSMI, CAN ICES-3 (B)/NMB-3(B) CB, CE LVD, CSA, BSMI Model GS305EPP and GS308EPP technical specifications The following table shows the technical specifications for model GS305EPP and GS308EPP. Factory Default Settings and 91 Technical Specifications User Manual
  • Netgear GS308EPP | User Manual - Page 92
    Plus Switches Table 9. Models GS305EPP GS305EPP and 8 for GS308EPP 54V, 2.4A DC input GS305EPP: 4.5W (no PoE), 137.8W (with PoE max) GS308EPP: 5.9W (no PoE), 141.4W (with PoE max) 6.2 x 4.0 x 1.1 in (158 x 101 x 27 mm) GS305EPP Factory Default Settings and 92 Technical Specifications User Manual
  • Netgear GS308EPP | User Manual - Page 93
    B Additional Switch Discovery and Access Information This appendix provides additional information about how you can discover and access the switch in your network. The appendix contains the following section: • Access the switch from any computer 93
  • Netgear GS308EPP | User Manual - Page 94
    . 2. Open a web browser, and in the address bar, type the IP address of the switch. The login page of the device UI opens. 3. Enter the switch password. The default password is password. The password is case-sensitive. The HOME page displays. The right pane (or, depending on the size of your browser
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
User Manual
Gigabit Ethernet Plus Switches
Models
•
GS305EP
•
GS305EPP
•
GS308EP
•
GS308EPP
NETGEAR, Inc.
350 E. Plumeria Drive
January 2021
San Jose, CA 95134, USA
202-12193-02