Netgear GS308P Installation Guide
Netgear GS308P Manual
 |
View all Netgear GS308P manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS308P manual content summary:
- Netgear GS308P | Installation Guide - Page 1
of sale) • Wall installation kit • Rubber feet • Installation guide Step 1. Connect the equipment. IP Phone Server Internet Step 3. Check the status. GS308P Optional router Sample connections Step 2. Connect to power. Optional modem Power LED On Off Left Port LEDs (Ports 1-4) 1000 Mbps - Netgear GS308P | Installation Guide - Page 2
EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. NETGEAR, Inc. 350 East Plumeria Drive San
-
1 -
2
 |
 |
Installation
Step 1. Connect the equipment.
8-Port Gigabit Ethernet Switch with
4-Port PoE
GS308P
Step 2. Connect to power.
Step 3. Check the status.
Power LED
Leſt Port LEDs (Ports 1–4)
Right PoE LEDs (Ports 1–8)
On
1000 Mbps link
PoE in use
Off
100 or 10 Mbps link
PoE halted (see
PoE
Troubleshooting
)
Activity (blinking)
No PoE use (off)
No link (off)
PoE Max LED
The maximum PoE power that the GS308P switch can deliver to all attached powered devices
(PDs) is 53 Watts total, with a maximum power to each port of 15.4 Watts. (For more
information, see
PoE Considerations
.)
The PoE Max LED indicates the status of the PoE power that the switch can deliver to all
attached PDs.
Less than 7W of PoE power is available on the switch (the LED is on).
The PoE Max LED was active in the previous two minutes (the LED is blinking).
Sufficient (more than 7W of) PoE power is available on the switch (the LED is off).
GS308P
Optional router
Optional modem
IP Phone
Server
Internet
Package Content
•
Switch
•
Power adapter (localized to the country of sale)
•
Wall installation kit
•
Rubber feet
•
Installation guide
Sample connections