Netgear GS724TPP Hardware Installation Guide
Netgear GS724TPP Manual
 |
View all Netgear GS724TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS724TPP manual content summary:
- Netgear GS724TPP | Hardware Installation Guide - Page 1
Hardware Installation Guide 24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports and Cloud Management GS724TPv2 GS724TPP March 2020 202-12037-02 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA - Netgear GS724TPP | Hardware Installation Guide - Page 2
period. Trademarks © NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for Reset button (model GS724TPP) on page 17. We revised PoE overview on page 20. 202-12037-01 December 2019 We added model GS724TPP. We added support for Insight. - Netgear GS724TPP | Hardware Installation Guide - Page 3
Introduction Overview 6 Management options 6 Features 8 Safety instructions and warnings 9 Chapter 2 Hardware Overview Front panel 13 Factory Defaults button (model GS724TPv2)....17 Multi-function Reset button (model GS724TPP 17 Chapter 3 Applications PoE overview 20 Connect PoE equipment in - Netgear GS724TPP | Hardware Installation Guide - Page 4
24-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports Chapter 5 Troubleshooting Troubleshooting chart 33 PoE troubleshooting suggestions 34 Additional troubleshooting suggestions 34 4 - Netgear GS724TPP | Hardware Installation Guide - Page 5
model GS724TPP. This chapter serves as an introduction to the switch and includes the following sections: • Overview • Management options • Features • Safety instructions and warnings Note: For more information about the topics that are covered in this manual, visit the support website at netgear - Netgear GS724TPP | Hardware Installation Guide - Page 6
-based management interface (in this guide referred to as the local browser interface). In this mode, you can change all settings of the switch. For more information about the local browser interface, see the user manual, which you can download from netgear.com/support/download/. Note: If you plan - Netgear GS724TPP | Hardware Installation Guide - Page 7
and, if necessary, troubleshoot the switch and the network. For more information about NETGEAR Insight, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support. By default, the mode are not saved to the cloud server. Introduction 7 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 8
support: - 24 PoE+ (802.3at) ports - Total PoE power budget of 190W for model GS724TPv2 and 380W for model GS724TPP and 36.1 dBA (at 25°C) for model GS724TPP • 52 Gbps full-duplex, nonblocking switch IEEE 802.1ab LLDP - IEEE 802.1p Class of Service (QoS) - IEEE 802.1D Spanning Tree Protocol (STP - Netgear GS724TPP | Hardware Installation Guide - Page 9
supported • NETGEAR green instructions and NETGEAR product, which might not be covered by NETGEAR's warranty, to the extent permissible by applicable law. • Observe and follow service markings: - Do not service services components inside these compartments. Introduction 9 Hardware Installation - Netgear GS724TPP | Hardware Installation Guide - Page 10
system components, and never operate the product in a wet environment. If the system gets wet, see the appropriate section in your troubleshooting guide, or contact your trained service provider. • Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by - Netgear GS724TPP | Hardware Installation Guide - Page 11
cables or plugs. Consult a licensed electrician or your power company for site modifications. • Always follow your local and national wiring rules. Introduction 11 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 12
Ports for 10/100/1000BASE-T Ethernet connectivity • SFP ports for fiber connectivity • Reset button and Factory Defaults button (model GS724TPv2) • Multi-function Reset button (model GS724TPP) 12 - Netgear GS724TPP | Hardware Installation Guide - Page 13
, see Single-function Reset button (model GS724TPv2) on page 16 or Multi-function Reset button (model GS724TPP) on page 17. 3 48 LEDs associated with the 24 Ethernet ports. For each port, the associated -T Ethernet connectivity on page 15. Hardware Overview 13 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 14
. Off. The port is not delivering PoE. Solid green. The port is delivering PoE. Solid amber. A PoE fault occurred. For more information, see PoE troubleshooting suggestions on page 34. Link and ACT LEDs 25F-26F Off. No SFP module link is established. Solid green. A 1000 Mbps link is established - Netgear GS724TPP | Hardware Installation Guide - Page 15
GS724TPP is identical. Figure 3. Back panel RJ-45 Ports for 10/100/1000BASE-T Ethernet connectivity All RJ-45 copper ports support of the attached device. All ports support a Category 5e (Cat 5e) unshielded RJ-45 ports support Auto Uplink All RJ-45 ports also support Power over Ethernet (PoE+, - Netgear GS724TPP | Hardware Installation Guide - Page 16
for 1G fiber connectivity. GBICs are sold separately from the switch. The switch supports the following NETGEAR ProSAFE SFP short-reach transceiver modules: • AGM731F SFP transceiver 1000BASE-SX, SFP short process, the Power LED lights amber. Hardware Overview 16 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 17
default settings. The NETGEAR registration status is maintained the NETGEAR registration status is reset. You must reregister the switch with NETGEAR. To Multi-function Reset button (model GS724TPP) Model GS724TPP provides a recessed, multi-function NETGEAR registration status is maintained - Netgear GS724TPP | Hardware Installation Guide - Page 18
are erased, the switch restarts with factory default settings, and the NETGEAR registration status is reset. You must reregister the switch with NETGEAR. To restart or reset the switch using the Reset button: 1. process, the Power LED lights amber. Hardware Overview 18 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 19
3 Applications The switch is designed to provide flexibility in configuring network connections. The switch can be used as your only network traffic-distribution device for PoE and non-PoE devices or with 10 Mbps, 100 Mbps, and 1 Gbps Ethernet and fiber hubs, routers, and switches. This chapter - Netgear GS724TPP | Hardware Installation Guide - Page 20
all active PoE+ ports is 190W for model GS724TPv2 and 380W for model GS724TPP. Supplied power is prioritized according to the port order, up to the total installation guide and user manual, both of which you can download from netgear.com/support/download/. Applications 20 Hardware Installation - Netgear GS724TPP | Hardware Installation Guide - Page 21
PoE+ devices such as PoE+ WiFi access points 1G connections to PoE devices such as security cameras and VoIP conference phones Applications 21 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 22
storage system Internet Connection 1G connections to PoE devices such as security cameras 1G connections to network devices and the Internet Applications 22 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 23
router. Figure 6. Sample desktop switching Letter A B C Device Switch model GS724TPv2 Network router or firewall Internet Letter D E F Device Network server Desktop Workstation Applications 23 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 24
4 Installation This chapter describes the installation procedures for the switch. Switch installation involves the steps that are described in the following sections: • Step 1: Prepare the site • Step 2: Protect against electrostatic discharge • Step 3: Unpack the switch • Step 4: Mount or place the - Netgear GS724TPP | Hardware Installation Guide - Page 25
conditions. Keep the switch at least 6 feet (1.83 meters) away from the nearest source of electromagnetic noise, such as a photocopy machine. Installation 25 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 26
7. Switch package contents Check the contents of the boxes to make sure that all items are present before installing the switch. Installation 26 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 27
module, you must remove the cap from the SFP socket. Screws for rack mounting Brackets for rack mounting Installation guide 5. If any item is missing or damaged, contact your local NETGEAR reseller for replacement. Step 4: Mount or place the switch You can mount the switch in a standard 19-inch - Netgear GS724TPP | Hardware Installation Guide - Page 28
optional procedure describes how to install an optional SFP transceiver module into one of the SFP ports of the switch. Note: Contact your NETGEAR sales office to purchase these modules. If you do not want to install an SFP module, skip this procedure. Installation 28 Hardware Installation - Netgear GS724TPP | Hardware Installation Guide - Page 29
ports All RJ-45 ports on the switch support PoE+. For application examples and information about PoE, see Applications on page 19. The switch supports Auto Uplink technology, which allows you to attach 2. Verify that all cables are installed correctly. Installation 29 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 30
does not light, check to see that the power cord is plugged in correctly and that the power source is good. Installation 30 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 31
manual, which you can download from netgear.com/support/download/. For more information about NETGEAR Insight, visit netgear.com/insight and see the NETGEAR knowledge base articles at netgear.com/support For information about the SCC utility, see netgear.com/support/product/SCC. Note: By default, the - Netgear GS724TPP | Hardware Installation Guide - Page 32
5 Troubleshooting This chapter provides information about troubleshooting the switch. The chapter includes the following sections: • Troubleshooting chart • PoE troubleshooting suggestions • Additional troubleshooting suggestions 32 - Netgear GS724TPP | Hardware Installation Guide - Page 33
with 2 SFP Ports Troubleshooting chart The following table lists symptoms, possible causes, and possible solutions for problems that might occur. Table 5. Troubleshooting chart Symptom The Spanning Tree Protocol (STP) to prevent network loops. Troubleshooting 33 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 34
condition resolves itself. Additional troubleshooting suggestions If the suggestions in the troubleshooting chart do not resolve the problem, see the following troubleshooting suggestions: • Network from the switch and then reconnect the power. Troubleshooting 34 Hardware Installation Guide - Netgear GS724TPP | Hardware Installation Guide - Page 35
-Port Gigabit (Hi-Power) PoE+ Ethernet Smart Managed Pro Switch with 2 SFP Ports If the problem continues, contact NETGEAR technical support. For more information, visit the support website at netgear.com/support/. • Autonegotiation. The RJ-45 ports negotiate the correct duplex mode, speed, and flow
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
 |
 |
Hardware Installation Guide
24-Port Gigabit (Hi-Power) PoE+ Ethernet
Smart Managed Pro Switch with 2 SFP Ports
and Cloud Management
GS724TPv2
GS724TPP
NETGEAR, Inc.
350 E. Plumeria Drive
March 2020
San Jose, CA 95134, USA
202-12037-02