Netgear GS724TPS GS7xxTPS Hardware manual
Netgear GS724TPS - ProSafe - Gigabit Stackable PoE Smart Switch Manual
 |
UPC - 606449061086
View all Netgear GS724TPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS724TPS manual content summary:
- Netgear GS724TPS | GS7xxTPS Hardware manual - Page 1
GS700TPS Hardware Installation Guide NETGEAR, Inc. 350 East Plumeria Drive San Jose, California 95134 202-10488-01 April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 2
and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card on your Resrouce CD. E-mail: [email protected] North American NETGEAR web site: http://www.netgear.com Trademarks NETGEAR, the NETGEAR logo - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 3
contain any user serviceable components and is limits set forth NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that the model GS700TPS Gigabit Stackable Smart Switch with PoE Frequency Interference Warnings & Instructions This equipment has been - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 4
GS700TPS Gigabit Stackable Smart Tested to Comply with FCC Standards FOR HOME OR OFFICE USE Modifications made to the product, unless expressly approved by NETGEAR, Inc Gigabit Stackable Smart Switch with PoE) does not exceed the Class B limits for radio-noise emissions from digital apparatus as set - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 5
Stack Master 2-5 Step 7: Applying AC Power 2-7 Step 8: Managing the Switch via a Web Browser/PC Utility for Initial Configuration ......2-7 Chapter 3 Physical Description Front and Back Panel Configuration 3-1 LED Designations ...3-3 Device Hardware Interfaces 3-5 Appendix A Troubleshooting - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 6
Appendix B Technical Specifications Index vi v1.0, April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 7
Guide Congratulations on the purchase of the NETGEAR Smart Switch. The NETGEAR® Installation Manual describes how to install, configure and troubleshoot the smart switch. The information in this manual names, extensions, commands, IP addresses • Formats. This manual uses the following formats to - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 8
GS700TPS Smart Switch • Scope. This manual is written for the GS700TPS according to these specifications: Product Version Manual Publication Date GS700TPS Smart Switch April 2009 Note: Product updates are available on the NETGEAR, Inc. web site at http://kbserver.netgear.com/main.asp. How to - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 9
GS700TPS Smart Switch - Click the print icon in the upper left of the window. Tip: If your printer supports printing two pages on a single sheet of paper, you can save paper and printer ink by selecting this feature. • Printing the Full Manual - Use the Complete PDF Manual link at the top left of - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 10
GS700TPS Smart Switch x v1.0, April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 11
This Installation Guide is for the following NETGEAR Smart Switches: • GS724TPS - This product offers support for 24 ports of 10/100/1000M (Base-T) and four Form-factor slots which support 10/100/1000 (1000Base-SX/LX/FX) SFP. This product supports the added feature of Power over Ethernet (PoE - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 12
GS700TPS Smart Switch for port and switch information, VLAN for traffic control, port trunking for increased bandwidth, and Class of Service (CoS) for traffic prioritization. These features provide better understanding and control of the network. Initial discovery of the switch on the network - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 13
server or PC can provide 2000 Mbps throughput. Figure 1-1 Switch Features The following list identifies the key features of the NETGEAR Smart Switch. • On the GS700TPS Smart Switch device there are 48 RJ-45 ports 10/100/1000M auto sensing Gigabit Ethernet switching ports, four of which are Combo - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 14
bandwidth of 20 Gbps (aggregate, bi-directional) via the device's HX Stack ports. • The following SFP types are supported: • 1000Base-SX • 1000Base-LX • 100Base-FX • The device supports full Netgear Smart Switch functionality. • The device provides full compatibility with IEEE standards: • IEEE 802 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 15
GS700TPS Smart Switch • Standard 1U high, rack mountable 19"chassis. • Fan speed control supported The GS724TPS supports the following PoE functions: • Smart Power Managed function handles the power of each port in the event of limited available power. • Supports the 24-Port PoE function as follows: - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 16
Smart Switch stack master in the event of failure of stack master. The master and backup master are assigned unit IDs of 1 and 2. The Stack Master provides a Single point of control and management as well as a single interface in which to control and manage the stack. Switch software is downloaded - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 17
following: • NETGEAR Smart Switch • Stacking Cable • Rubber footpads for tabletop installation • Power cord • Rack-mount Kit for installing the switch in a 19-inch rack • Installation Guide • Smart Switch Resource CD with Smart Wizard Discovery and User's manual • Warranty/Support Information Card - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 18
GS700TPS Smart Switch 1-8 Introduction v1.0, April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 19
" "Step 4: Connecting Devices to the Switch" "Step 5: Installing an SFP GBIC Module" "Step 6 Installing Device as Stand-alone or Stack Master" "Step 7: Applying AC Power" "Step 8: Managing the Switch via a Web Browser/PC Utility for Initial Configuration" Step 1: Preparing the Site Before - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 20
GS700TPS Smart Switch Table 2-1. Site Requirements Characteristics Requirements Power source Environmental Provide a power source within 6 feet (1.8 meters) of the installation location. Power specifications for the switch are shown in Appendix A, "Troubleshooting". Ensure the AC outlet is not - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 21
GS700TPS Smart Switch 5. Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack. Figure 2-1 Note: Always install devices from the bottom of the to the top. This will prevent the rack from over balancing and - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 22
• Ensure all equipment is mounted properly and securely. Step 4: Connecting Devices to the Switch The following procedure describes how to connect PCs to the switch's RJ-45 ports. The NETGEAR Smart Switch contains Auto Uplink™ technology, which allows you to attach devices using either straight - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 23
to install an SFP Gigabit Ethernet module in the switch's Gigabit module bay. Standard SFP GBIC modules are sold separately from the Smart Switch. If you do not plan to install an SFP GBIC module at this time, skip this procedure. To install an SFP GBIC module: 1. Insert the SFP module into the SFP - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 24
slave designations are configured through automatic discovery. Manually changing the stacking configuration is through switch's web page once the device has been booted and is operational. For more information on stacking see the Software Administrator User Guide. A link to the User Guide is on your - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 25
Configuration The NETGEAR Smart Switch contains software for viewing, changing, and monitoring the way it works. This management software is not required for the switch to work. You can use the ports without using the management software. However, the management software enables you to setup VLAN - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 26
GS700TPS Smart Switch 2-8 Installation v1.0, April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 27
following: • 24 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports. • Four SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP. • Reset button to restart the device. • Recessed default reset button to restore the device back to the factory defaults. To - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 28
for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports. • Four SFP slots for SFP modules supporting 1000 (1000Base-SX/LX)/100M SFP. • Reset button to restart the device. • Recessed default reset button to restore the device back to the factory defaults. To restore the device the button - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 29
GS700TPS Smart Switch The back panel contains the following: • A 100-240VAC/50-60 Hz universal input RS-232 Console interface, which is a standard AC power receptacle for accommodating the supplied power cord. • Two 19 pin Gbps HX stacking ports. LED Designations This section provides an explanation - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 30
GS700TPS Smart Switch Port LEDs Table 3-1. The following table describes the port LED designations.Port LEDs Port LED 24/48-10/100/1000 Ports Link/ACT LED - One LED/Port 24/48-10/100/1000 Ports PoE Mode - One LED/Port 4-SFP Ports - One LED/ SFP Link/ACT LED Port Designation • Off - No 10/100/ - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 31
GS700TPS Smart Switch Table 3-2. System LEDs LED Power LED FAN LED MAX POE LED 1~48 Port LED mode select LED Stack ID LED- One Seven Segment LED Display Stack Master LED Stack Port LED Designation • Off - Power is disconnected. • Solid Green - Power is supplied to the switch and is operating - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 32
in at the same time, the fiber port becomes active. The SFP GBIC bay accommodates a standard SFP GBIC module. The following types of SFP ports are supported: • 1000Base-SX • 1000base-LX • 100Base-FX Stacking Ports Two dedicated high speed stacking ports, with minimum stacking bandwidth of 20 Gbps - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 33
Switch Factory Defaults Button The Smart Switch has a Factory default button to enable clearing the current configuration and returning the device back to the factory settings. This removes all settings, including the password, VLAN settings and port configurations. If the switches are in a stack - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 34
GS700TPS Smart Switch 3-8 Physical Description v1.0, April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 35
information about troubleshooting the NETGEAR Smart Switch. The topics include the following: • "Troubleshooting Chart" • "Additional Troubleshooting Suggestions" Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems. Table A-1. Troubleshooting Chart - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 36
"Restore to Default" button. If the stack links are combo links, use the Web Management to configure the unit as a stackable unit, with combo links used as the stacking ports. Additional Troubleshooting Suggestions If the suggestions in Troubleshooting Chart do not resolve the problem, refer to - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 37
auto negotiation, the switch only determines the speed correctly and the duplex mode defaults to half-duplex. The gigabit port on the Gigabit module negotiates speed, duplex mode, and flow control, provided that the attached device supports auto-negotiation. Troubleshooting A-3 v1.0, April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 38
GS700TPS Smart Switch A-4 Troubleshooting v1.0, April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 39
Form-factor Pluggable (SFP) slots, supported 1000(1000Base-SX/LX)/100M SFP LEDs Per port LEDs: Link Status or PoE Status, Stack Link Status (for stacking-enabled ports) Per device: Power, FAN, Stack ID, Stack Master, Max PoE Performance Specifications Forwarding modes: Store-and-forward Address - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 40
GS700TPS Smart Switch Power Supply Power Consumption: 235W for GS724TPS Power Consumption: 530W for GS748TPS 100-240VAC/50-60 Hz universal input Physical Specifications Dimensions (H x W x D): GS724TPS: 1.7 x 17.3 x 12.2 / 43 x 440 x 310 (in/mm) Dimensions (H x W x D): GS748TPS: 1.7 x 17.3 x 17.0 / - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 41
GS700TPS Smart Switch Electromagnetic Immunity EN 55022 (CISPR 22), Class A Safety CE mark, commercial UL/cUL listed (UL 1950) / CUL IEC950 / EN60950 Modules AGM731F 1000Base-SX SFP GBIC for multimode fiber AGM732F 1000Base-LX SFP GBIC for single mode fiber AGM733 1000Base-LZ GBIC for long haul - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 42
GS700TPS Smart Switch B-4 Technical Specifications v1.0, April 2009 - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 43
of Service, 1-2 Combo Port, 3-6 Combo Ports, 1-4 Connecting Devices to the Switch, 2-4 Copper, 1-1 Crossover, 3-6 Index Customer support, 1-ii D Default IP Address, 2-7 Duplex Mode, 3-6 F Factory Default Button, 3-7 Fiber Connectivity, 1-1 Flat Surface, 2-2 Full-duplex, 1-2 G GBIC, 1-2, 3-6 Gigabit - Netgear GS724TPS | GS7xxTPS Hardware manual - Page 44
Link/ACT LED, 3-4 SFP Module Bay, 2-5 Site Requirements, 2-1 Smart Switch Resource CD, 1-7 Smart Wizard Discovery, 1-2 Straight-through, 3-6 Support, 1-ii Support Information Card, 1-7 T Temperature, 2-2 Traffic Control, 1-2 Troubleshooting Chart, A-1 U User Intervention, 3-6 User's Manual, 1-7 UTP
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
 |
 |
202-10488-01
April 2009
NETGEAR
, Inc.
350 East Plumeria Drive
San Jose, California 95134
GS700TPS Hardware
Installation Guide