Netgear GS748TP GS724TP Hardware manual
Netgear GS748TP - ProSafe Smart PoE Switch Manual
 |
UPC - 606449051445
View all Netgear GS748TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Netgear GS748TP manual content summary:
- Netgear GS748TP | GS724TP Hardware manual - Page 1
GS700TP (724TP, 748TP) Series Hardware Installation Guide NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10335-01 November 2007 - Netgear GS748TP | GS724TP Hardware manual - Page 2
and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card. E-mail: [email protected] North American NETGEAR website: http://www.netgear.com Trademarks NETGEAR, the NETGEAR logo, and Auto Uplink are - Netgear GS748TP | GS724TP Hardware manual - Page 3
with any other antenna or transmitter. FCC Declaration Of Conformity We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that the model GS700TP Smart Switch with Gigabit Ports complies with Part 15 of FCC Rules. Operation is subject to - Netgear GS748TP | GS724TP Hardware manual - Page 4
made to the product, unless expressly approved by NETGEAR, Inc., could void the user's right to operate the equipment. D Canadian Department of Communications Radio Interference Regulations This digital apparatus (GS700TP Smart Switch with Gigabit Ports) does not exceed the Class B limits for radio - Netgear GS748TP | GS724TP Hardware manual - Page 5
Module 2-32 Step 6: Applying AC Power 2-33 Step 7: Managing the Switch through a Web Browser or the PC Utility for Initial Configuration ...2-34 Chapter 3 Physical Description Front and Back Panel Configuration 3-19 GS724TP Front and Back Panels Configuration 3-19 GS748TP Front and Back Panels - Netgear GS748TP | GS724TP Hardware manual - Page 6
-45 Ports ...3-23 SFP GBIC Module 3-24 Factory Defaults Button 3-24 Appendix A Troubleshooting Troubleshooting Chart A-1 Additional Troubleshooting Suggestions A-2 Network Adapter Cards A-2 Configuration ...A-2 Switch Integrity ...A-2 Auto-negotiation ...A-3 Appendix B Technical Specifications - Netgear GS748TP | GS724TP Hardware manual - Page 7
About This Guide Congratulations on the purchase of the NETGEAR Smart Switch. The NETGEAR® GS700TP Installation Manual describes how to install, configure and troubleshoot the smart switch. The information in this manual is intended for readers with intermediate computer and Internet skills. - Netgear GS748TP | GS724TP Hardware manual - Page 8
GS700TP Hardware Installation Guide • Scope. This manual is written for the GS700TP according to these specifications: Product Version Manual Publication Date GS700TP Smart Switch November 2007 Note: Product updates are available on the NETGEAR, Inc. web site at http://kbserver.netgear.com/main. - Netgear GS748TP | GS724TP Hardware manual - Page 9
GS700TP Hardware Installation Guide - Click the print icon in the upper left of the window. Tip: If your printer supports printing two pages on a single sheet of paper, you can save paper and printer ink by selecting this feature. • Printing the Full Manual - Use the Complete PDF Manual link at the - Netgear GS748TP | GS724TP Hardware manual - Page 10
Guide is for the following NETGEAR Smart Switches: • GS724TP - This product offers support for 24 ports of 10/100/1000 and two Form-factor slots which support 1000 (1000Base-SX/LX)/100M SFP. This product supports the added feature of Power over Ethernet (PoE). • GS748TP - This product offers support - Netgear GS748TP | GS724TP Hardware manual - Page 11
, or Gigabit Ethernet devices. In addition, all RJ-45 ports operate in half- or full-duplex mode. The maximum segment length is 328 feet (100 meters) over Category 5 Unshielded Twisted-Pair (UTP) cable, but much longer for fiber connections using SFP GBIC modules. The NETGEAR Smart Switch can be - Netgear GS748TP | GS724TP Hardware manual - Page 12
Installation Guide Figure 1-1 Switch Features The following list identifies the key features of the NETGEAR Smart Switch. • 24/48 RJ-45 10/100/1000M auto-sensing Giga switching ports. • Small Form-factor Pluggable (SFP) GBIC slots, which function as combo ports. Combo ports are single ports with - Netgear GS748TP | GS724TP Hardware manual - Page 13
support full Netgear Smart Switch functionality and provide full compatibility with the following IEEE standards: - IEEE 802.3i, (10Base-T) - IEEE 802.3u (100Base-TX, 100Base-FX) - IEEE 802.3x (Full-duplex flow control) - IEEE 802.3ab (1000Base-T) - IEEE 802.3z (1000Base-X) - IEEE 802.3af (DTE Power - Netgear GS748TP | GS724TP Hardware manual - Page 14
power of each port in the event of limited available power. - Support 48-Port POE function, 15.4W for 24 ports , 8W for 48 ports , Total 384W for POE. GS748TP using data pairs (RJ-45 1,2,3&6 PIN) provide power to PD. Package Contents Figure 1-2 shows the package contents of the NETGEAR Smart Switch - Netgear GS748TP | GS724TP Hardware manual - Page 15
• Rack-mount Kit for installing the switch in a 19-inch rack • Installation Guide • Smart Switch Resource CD with SmartWizard Discovery and User's manual • Warranty/Support Information Card If any item is missing or damaged, contact the place of purchase immediately. Introduction v1.0, November - Netgear GS748TP | GS724TP Hardware manual - Page 16
for your NETGEAR Smart Switch. Switch installation involves the following steps: Step 1: Preparing the Site Step 2: Installing the Switch Step 3: Checking the Installation Step 4: Connecting Devices to the Switch Step 5: Installing an SFP GBIC Module Step 6: Applying AC Power Step 7: Managing - Netgear GS748TP | GS724TP Hardware manual - Page 17
Installation Guide Table 2-1. Site Requirements (continued) Characteristics Requirements Power source Environmental Provide a power source within 6 feet (1.8 meters) of the installation location. Power specifications for the switch are shown in Appendix A Appendix A "Troubleshooting". Ensure - Netgear GS748TP | GS724TP Hardware manual - Page 18
over balancing and toppling over. Step 3: Checking the Installation Before applying power perform the following: • Inspect the equipment thoroughly. • Verify that all cables are installed correctly. • Check cable routing to make sure cables are not damaged or creating a safety hazard. • Ensure all - Netgear GS748TP | GS724TP Hardware manual - Page 19
Installation Guide Step 4: Connecting Devices to the Switch The following procedure describes how to connect PCs to the switch's RJ-45 ports. The NETGEAR Smart Switch contains Auto Uplink™ technology, which allows you to attach devices using either straight-through or crossover cables.. Figure - Netgear GS748TP | GS724TP Hardware manual - Page 20
Installation Guide To install an SFP GBIC module: 1. Insert the SFP module into the SFP module bay. 2. Press firmly to ensure the module seats into the connector Figure 2-3 Step 6: Applying AC Power NETGEAR Smart Switch does not have an ON/OFF switch. The method of applying or removing AC power is - Netgear GS748TP | GS724TP Hardware manual - Page 21
called SmartWizard Discovery. For more information about managing the switch, see the Software Manual on the Smart Switch Resource CD. Note: When the device powers up, there is a default IP address already configured on the device. The default IP address is 192.168.0.239 and subnet mask 255.255.255 - Netgear GS748TP | GS724TP Hardware manual - Page 22
• 24 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports. • Two SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP. • Reset button to restart the device. • Recessed default reset button to restore the device back to the factory defaults. • Port LEDS v1 - Netgear GS748TP | GS724TP Hardware manual - Page 23
automatically Figure 3-3 illustrates the NETGEAR GS748TP Smart Switch front panel: Figure 3-3 The front panel contains the following: • 48 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports. • Four SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M - Netgear GS748TP | GS724TP Hardware manual - Page 24
GS700TP Hardware Installation Guide Figure 3-4 illustrates the NETGEAR GS724TP Smart Switch back panel: Figure 3-4 The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord. LED Designations - Netgear GS748TP | GS724TP Hardware manual - Page 25
LED MAX POE LED 1~24/48 Port LED mode select LED Power LED Designation • Off - Indicates that there is at least 7W of PoE power available for LED Mode (default). • Solid Yellow- LED Mode in PoE LED Mode. • Off - Power is disconnected. • Solid Green - Power is supplied to the switch and is - Netgear GS748TP | GS724TP Hardware manual - Page 26
Ports • SFP GBIC Module • Factory Defaults Button RJ-45 Ports RJ-45ports are auto-sensing ports. When inserting a cable into an RJ-45 port, the switch automatically ascertains the maximum speed (10 or 100 or 1000 Mbps) and duplex mode (half- or full-duplex) of the attached device. All ports support - Netgear GS748TP | GS724TP Hardware manual - Page 27
SFP GBIC module. Factory Defaults Button The Smart Switch has a Factory default button to enable clearing the current configuration and returning the device back to the factory settings. This removes all settings, including the password, VLAN settings and port configurations. Physical Description - Netgear GS748TP | GS724TP Hardware manual - Page 28
the NETGEAR Smart Switch. The topics include the following: • Troubleshooting Chart • Additional Troubleshooting Suggestions Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems. Table A-1. Troubleshooting Chart Symptom Cause Solution Power LED - Netgear GS748TP | GS724TP Hardware manual - Page 29
the AC power from the switch and then reconnect AC source. If the problem continues, contact NETGEAR technical support. In North America, call 1-888-NETGEAR. If you are outside of North America, please refer to the support information card included with your product. Troubleshooting A-2 v1 - Netgear GS748TP | GS724TP Hardware manual - Page 30
not support auto negotiation, the switch only determines the speed correctly and the duplex mode defaults to half-duplex. The gigabit port on the Gigabit module negotiates speed, duplex mode, and flow control, provided that the attached device supports auto-negotiation. A-3 Troubleshooting v1 - Netgear GS748TP | GS724TP Hardware manual - Page 31
Pluggable (SFP) slots for SFP module. LEDs Per port (Gigabit): Link/Activity, SpeedPer device: Power, Mode, PoE Max, Fan Status Performance Specifications Forwarding modes: Store-and-forward Bandwidth: 68 Gbps (for GS724TP) / 116 Gbps (for GS748TP) Address database size: 4K media access control (MAC - Netgear GS748TP | GS724TP Hardware manual - Page 32
, 147,558 hours for GS748TP Power Supply Power Consumption: 260W for GS724TP, 570W for GS748TP 100-240VAC/50-60 Hz universal input Physical Specifications Dimensions (H x W x D): GS724TP/GS724TP: 1.6 x 17.3 x 8.1 / 43 x 440 x 205 (in/mm) Weight: 6.33 / 2.87 (lbs/kg), GS748TP : 11.27 / 5.11 (lbs - Netgear GS748TP | GS724TP Hardware manual - Page 33
UL listed (UL 1950) / CUL IEC950 / EN60950 Modules AGM731F 1000Base-SX SFP GBIC for multimode fiber AGM732F 1000Base-LX SFP GBIC for single mode fiber AGM733 1000Base-LZ GBIC for long haul single mode fiber Technical Specifications B-3 v1.0, November 2007 - Netgear GS748TP | GS724TP Hardware manual - Page 34
D Default IP Address 4-18 Default Reset Button 2-5, 2-7 Device Hardware Interfaces 2-9 Duplex Mode 2-9 E Example of Desktop Switching 3-12 F Factory Default Button 2-10 Factory Defaults 2-5 Fan LED 2-9 Fiber Connectivity 1-1 Flat Surface 4-14 Full-duplex 1-2 G GBIC 1-2, 2-10 Gigabit Ports 1-1 H High - Netgear GS748TP | GS724TP Hardware manual - Page 35
Requirements 4-13 Small Form-factor Pluggable (SFP) 1-2 Smart Switch Resource CD 1-4 SmartWizard Discovery 1-2 Straight-through 2-9 Support Information Card 1-4 System LEDs 2-9 T Temperature 4-14 Traffic Control 1-1 Troubleshooting Chart A-19 U User Intervention 2-10 v1.0, November 2007 Index-2 - Netgear GS748TP | GS724TP Hardware manual - Page 36
User's Manual 1-4 UTP 4-16 V Ventilation 4-14 VLAN 1-1 W Warranty 1-4 Web-based Graphical User Interface 1-1 Index-3 v1.0, November 2007
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
202-10335-01
November 2007
NETGEAR
, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
GS700TP (724TP, 748TP)
Series Hardware
Installation Guide