Netgear HDX111 HDX111 User Manual - Page 25
Resetting to Factory Defaults, Factory Reset - software
View all Netgear HDX111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
HDX111 Powerline HD Plus Ethernet Adapter User Manual Resetting to Factory Defaults There are two ways to return the Powerline HD Plus Ethernet Adapter to its factory default settings. • Press the Security button on the Powerline HD Plus Ethernet Adapter for 12 seconds until its Status light goes off. • Use the HDX111 configuration utility to reset devices on the Powerline network one by one. To use the HDX111 configuration utility to reset to factory defaults: Note: If you use a custom network ID, as each device is reset it will be disconnected from the Powerline network. To avoid losing access to the Powerline network in this situation, first reset all remote devices and then reset the local device. 1. For a remote device in your network, click the device name to highlight it in the Main tab. Select remote devices first. Figure 2-10 a. Click Factory Reset. The software will display a message similar to the following: Figure 2-11 HDX111 Configuration Utility 2-7 v1.1, March 2008