Netgear JWNR2000v1 JWNR2000 User Manual (PE/UK)

Netgear JWNR2000v1 Manual

Get Netgear JWNR2000v1 PDF manuals and user guides View all Netgear JWNR2000v1 manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear JWNR2000v1 manual content summary:

  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 1
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA 202-10625-01 February 2010 v1.0
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 2
    support service. Product updates and Web support are always available at http://www.netgear.com/support. Setup documentation is available on the CD, on the support website, and on the documentation website. When the wireless router operating instructions. Federal Wireless-N 300 Router Model JWNR2000
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 3
    all options described in this user's guide may not be available in your for supplying public access to telecommunications and/or network services. • This device may not be used for authority in France. Česky [Czech] [NETGEAR Inc.] tímto prohlašuje, že tento [JWNR2000] je ve shode se základními
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 4
    laite on direktiivin 1999/5/ EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar [NETGEAR Inc.] att denna [JWNR2000] står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 5
    installed and used in accordance with the instructions, may cause harmful interference to radio product does not contain any user serviceable components and is to be NETGEAR, Inc., 350 East Plumeria, San Jose, CA 95134, declare under our sole responsibility that Wireless-N 300 Router Model JWNR2000
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 6
    on a circuit different from that which the radio receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Wireless-N 300 Router Model JWNR2000 Tested to Comply with FCC Standards FOR HOME OR OFFICE USE Modifications made to the product, unless expressly approved by
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 7
    Product and Publication Details Model Number: Publication Date: Product Family: Product Name: Home or Business Product: Language: Publication Part Number: JWNR2000 February 2010 Wireless Router Wireless-N 300 Router Model JWNR2000 Home English 202-10625-01 vii v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 8
    viii v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 9
    Manual xii Revision History ...xiii Chapter 1 Configuring Basic Connectivity Using the Setup Manual 1-1 Logging In To Your Wireless Router 1-2 Configuring Your Internet Connection Using the Smart Setup Wireless Client Devices after WPS Setup 2-18 Restricting Wireless Access by MAC Address
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 10
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Chapter 3 Restricting Access From Your Network Content Filtering Overview 3-1 Blocking Access to Internet Sites 3-1 Blocking Access to Internet Services 3-3 Blocking Services by IP Address Range 3-5 Scheduling Blocking ...3-5 Viewing Logs of
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 11
    6-10 Updating Manually to New Router Firmware 6-11 Enabling Remote Management Access 6-13 Chapter 7 Troubleshooting Quick Tips ...7-1 Troubleshooting Basic Functions 7-2 Login Problems ...7-4 Checking the Internet Service Connection 7-5 Obtaining an Internet IP Address 7-5 Troubleshooting PPPoE
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 12
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Testing the Path from Your Computer to a Remote Device 7-9 Problems with Date and Time 7-9 Problems with Wireless Adapter Connections 7-10 Restoring the Default Configuration and Password 7-11 Appendix A Technical Specifications Default
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 13
    provides information for configuring the features of the NETGEAR® Wireless-N 300 Router Model JWNR2000 beyond initial configuration settings. Initial configuration instructions can be found in the NETGEAR Wireless Router Setup Manual. You should have basic to intermediate computer and Internet
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 14
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Danger: This is a safety warning. Failure to take heed of this notice might result in personal injury or death. • Scope. This manual is written for the JWNR2000 router according to these specifications: Product Version Manual Publication Date
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 15
    Revision History NETGEAR Wireless-N 300 Router JWNR2000 User Manual NETGEAR, Inc. is constantly searching for ways to improve its products and documentation. The following table indicates any changes that might have been made since the JWNR2000 router was introduced. Table 2-1. Publication
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 16
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual xiv v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 17
    these connectivity settings, as well as instructions on how to log in to the router for further configuration. Note: NETGEAR recommends using the Smart Wizard™ on the Resource CD for initial configuration, as described in the NETGEAR Wireless Router Setup Manual. This chapter includes the following
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 18
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Logging In To Your Wireless Router When the wireless router is connected to your network, you can access and configure the router using your browser. To access the router: 1. Connect to the wireless router by typing http://www.routerlogin.net in the
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 19
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual The Checking for Firmware Updates screen appears unless you previously cleared the Check for Updated Firmware Upon Log-in check box. Figure 1-2 If the router discovers a newer version of firmware, the message on the left displays when you log in.
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 20
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 3. In the main menu on the left, select Basic Settings under Setup. The Basic Settings screen displays showing the wireless router's home page and suggested default settings. Figure 1-4 Note: If the Check for New Version Upon Log-in check box is
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 21
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Configuring Your Internet Connection Using the Smart Setup Wizard You can manually configure your Internet connection using the Basic Settings screen, or you can allow the Smart Setup Wizard to determine your Internet Service Provider (ISP)
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 22
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual ISP does not require login Figure 1-5 - Account Name (might also be called Host Name). The account name is provided to the ISP during a DHCP request from your router. In most cases, this setting is not required, but some ISPs require it for access
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 23
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual - Internet IP Address. Determines how your router obtains an IP address for Internet access. • If your ISP assigns an IP address dynamically (by DHCP), select Get Dynamically From ISP. • If your ISP has assigned you a permanent, fixed (static) IP
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 24
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual If a login is required by your ISP, the following settings appear in the Basic Settings screen: ISP does require login Figure 1-6 • Does Your Internet Connection Require A Login? If you usually must use a login program such as WinPOET to access the
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 25
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual • Telstra Bigpond, an Australian residential cable modem service Note: The Telstra Bigpond setting is only for older cable modem service accounts still requiring a Bigpond login utility. Telstra has discontinued this type of account. Those with
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 26
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual - The list includes: • Always On. The router logs in to the Internet immediately after booting and never disconnects. • Dial on Demand. The router logs in only when outgoing traffic is present and logs out after the idle time-out. • Manually Connect
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 27
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 1. Select Wireless Settings under Setup in the main menu of the JWNR2000 router. Figure 1-9 2. For the wireless necessary to change the wireless channel unless you notice interference problems with another nearby wireless router or access point.
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 28
    . Configure and test your wireless computer for wireless connectivity. Program the wireless adapter of your computer to have the same SSID and channel that you specified in the router, and disable encryption. Check that your computer has a wireless link and can obtain an IP address by DHCP from the
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 29
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Once your computer has basic wireless connectivity to the router, you can configure the advanced wireless security functions of the computer and router (for more information about security and these settings, see Chapter 2, "Safeguarding Your
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 30
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 1-14 v1.0, February 2010 Configuring Basic Connectivity
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 31
    Your Network The Wireless-N 300 Router Model JWNR2000 provides highly effective security features, which are covered in detail in this chapter. This chapter includes the following sections: • "Choosing Appropriate Wireless Security" • "Recording Basic Wireless Settings Setup Information" on page
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 32
    NETGEAR recommends that you change the administration password of your router. wireless network, you can: • Manually specify your SSID and your wireless security settings. The JWNR2000 router provides two screens for configuring the wireless settings: - Wireless Settings. You access these under Setup
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 33
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual • Use Wi-Fi Protected Setup (WPS) to automatically set the SSID and implement WPA/ WPA2 security on both the router and the client device. If the clients in your network are WPS capable, you can use Wi-Fi Protected Setup (WPS) to automatically set
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 34
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Table 2-2. Other Features That Enhance Security Security Type Description Disable the wireless router radio. If you disable the wireless router radio, wireless devices cannot communicate with the router at all. You might disable this when you
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 35
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Recording Basic Wireless Settings Setup Information Before and after customizing your wireless settings, print this section, and record the following information. If you are working with an existing wireless wireless adapters and the wireless router
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 36
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual - Wireless Settings screen, which you access under Setup in the main menu. Viewing Basic Wireless Settings To specify the wireless security settings of your router: 1. Log in to the router as described in "Logging In To Your Wireless Router
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 37
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2. Select Wireless Settings under Setup in the main menu. The Wireless Settings screen displays. Figure 2-2 The available settings in this screen are: • Name (SSID). The SSID is also known as the wireless network name. Enter a value of up to 32
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 38
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual • Channel. This field determines which operating frequency is used. It should not be necessary to change the wireless channel unless you notice interference problems with another nearby wireless network. The wireless router uses channel bonding
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 39
    either configure your wireless adapter to match the wireless router WEP settings or access the wireless router from a wired computer to make any further changes. Not all wireless adapter configuration utilities support passphrase key generation. 1. Select Wireless Settings under Setup in the main
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 40
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual . Figure 2-3 3. Select the authentication type and encryption strength. 4. You can manually or are relatively new standards, older wireless adapters and devices might not support them. Check whether newer drivers are available from the manufacturer
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 41
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual WPA-Pre-Shared Key does perform authentication. WPA-PSK uses XP with Service Pack 2 does include WPA support. Nevertheless, the wireless adapter hardware and driver must also support WPA. For instructions on configuring wireless computers or PDAs
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 42
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 4. Click Apply to save your settings. Viewing Advanced Wireless Settings This section describes the wireless settings that you can view and specify in the Advanced Wireless Settings screen, which you access under Advanced in the main menu. To
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 43
    about this list, see "Restricting Wireless Access by MAC Address" on page 2-19. . Using WPS Push Button Connect (Wi-Fi Protected Setup) If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure the router's network name (SSID) and security settings
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 44
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual The JWNR2000 router provides two methods for connecting to a wireless client that supports WPS, router. 2. On the wireless client, follow its specific networking instructions to enable WPS, to allow it to connect to the router. The JWNR2000 router's
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 45
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 4. Click the button in the Add WPS Client screen. The Connecting to New Wireless Client screen displays. Figure 2-7 The WPS LED on the JWNR2000 router begins to blink in a regular pattern. While the button light is blinking, you have 2 minutes to
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 46
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2. Select Add WPS Client in the main menu, and click Next. 3. Select the PIN Number setup method. Figure 2-8 4. On the wireless client, obtain its security PIN, or follow its specific networking instructions to generate a client security PIN. 5. In
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 47
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Configuring the WPS Settings 1. Log in to the router as described in "Logging In To Your Wireless Router" on page 1-2. 2. Select Wireless Settings under Advanced in the main menu. Figure 2-10 These options are available under WPS Settings: • Router
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 48
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Connecting Additional Wireless Client Devices after WPS Setup You can add WPS-enabled and non-WPS-enabled client devices. Adding Additional WPS-Enabled Clients To add an additional wireless client device that is WPS enabled: Note: Your wireless
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 49
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 4. For information about how to view a list of all devices connected to your router (including wireless and Ethernet connected), see "Viewing a List of Attached Devices" on page 6-7. Restricting Wireless Access by MAC Address When a Wireless Card
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 50
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 3. Click Add to add a wireless device to the wireless access control list. The Wireless Card Access Setup screen opens and displays a list of currently active wireless cards and their Ethernet MAC addresses. Figure 2-12 4. If the computer you want
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 51
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 7. Select the Turn Access Control On check box. Note: When configuring the router from a wireless computer whose MAC address is not in the Trusted PC list, if you select Turn Access Control On, you lose your wireless connection when you click Apply.
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 52
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual To change the administrator password: 1. On the main menu, under Maintenance, select Set Password to display the Set Password screen. Figure 2-13 2. To change the
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 53
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Understanding Your Firewall Your Wireless-N 300 Router Model JWNR2000 addresses and Web address keywords. This feature is described in "Blocking Access to Internet Sites" on page 3-1. • Blocking services. Block the use of certain Internet services
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 54
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2-24 v1.0, February 2010 Safeguarding Your Network
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 55
    Content Filtering Overview The Wireless-N 300 Router Model JWNR2000 provides you with Web services, such as chat rooms or games. Blocking Access to Internet Sites The JWNR2000 router allows you to restrict access based on Web addresses and Web address keywords. Up to 255 entries are supported
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 56
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual To block access to Internet sites: 1. Select Block Sites under blocking and logging. Specify a trusted user by entering that computer's IP address in the Trusted IP Address fields. 3-2 Restricting Access From Your Network v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 57
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Since the trusted user is identified by IP address, you should configure that computer with a fixed IP address. 5. Click Apply to save all your settings in the Block Sites screen. Blocking Access to Internet Services The JWNR2000 router allows you
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 58
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 3. Specify a service for blocking by clicking Add. The Block Services Setup screen displays. Figure 3-3 4. From the Service Type list, select the application or service to be allowed or blocked. The list already displays several common services,
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 59
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Blocking Services by IP Address Range In the Filter Services For area, you can block the specified service for a single computer, a range of computers (having consecutive IP addresses), or all computers on your network. Scheduling Blocking The
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 60
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Be sure to select your time zone in the E-mail screen Table 3-1. Log Entry Descriptions Field Date and time Source IP Description The date and time the log entry was recorded. The IP address of the initiating device for this log entry. 3-6
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 61
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Table 3-1. Log Entry Descriptions Field Target address Action Description The name or IP address of the website or newsgroup visited or to which access was attempted. Whether the access was blocked or allowed. To refresh the log screen, click
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 62
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Figure 3-6 2. To receive e-mail logs and alerts from the router, select the Turn E-mail the e-mail address to which logs and alerts are sent in the Send To This E-mail Address field. This e-mail address will also be used as the From address. If you
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 63
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual to the specified e-mail address. After the log is sent, the log is cleared from the router's memory. If the router cannot e-mail the log . If your region supports daylight savings time, select this check box. The router will automatically adjust the
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 64
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 3-10 Restricting Access From Your Network v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 65
    advanced networking features of the Wireless-N 300 Router Model JWNR2000, including LAN, WAN, and routing settings. It contains the following sections: • "Using the LAN IP Setup Options" • "Using a Dynamic DNS Service" on page 4-6 • "Configuring the WAN Setup Options" on page 4-8 • "Configuring
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 66
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual To configure LAN IP settings, select LAN Setup under Advanced in the main menu. The LAN Setup screen displays. Figure 4-1 Configuring a Device Name The device name is a user-friendly name for the router. This name is shown in the Network on Windows
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 67
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Configuring LAN TCP/IP Setup Parameters These are advanced settings that you might configure if you are a network administrator and your network contains multiple routers. The router is shipped preconfigured to use private IP addresses on the LAN
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 68
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Using the Router as a DHCP Server By default, the router functions as a DHCP server, allowing it to assign IP, DNS server, and default gateway addresses to all computers connected to the router's LAN. The assigned default gateway address is the LAN
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 69
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Using Address Reservation When you specify a reserved IP address for a computer on the LAN, that computer always receives the same IP address each time it accesses the router's DHCP server. Reserved IP addresses should be assigned to computers or
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 70
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Using a Dynamic DNS Service If your Internet Service Provider (ISP) gave you a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers (DNS). However, if your
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 71
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual To configure for a Dynamic DNS service: 1. Register for an account with one of the Dynamic DNS service providers whose names appear in the Service dyndns.org to be aliased to the same IP address as yourhost.dyndns.org. 8. Click Apply to save
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 72
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Configuring the WAN Setup Options The WAN Setup options let you configure a DMZ (demilitarized zone) server, change the Maximum Transmit Unit (MTU) size, and enable the wireless router troubleshooting application Address Translation (NAT). The router
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 73
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual them, but there are other applications that might not function well. In some cases, one local computer can run the application correctly if that computer's IP address is entered as the default DMZ server. Warning: DMZ servers pose a security risk. A
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 74
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Configuring NAT Filtering Network Address Translation (NAT) determines how the router telling your router that 134.177.0.0 should be accessed through the ISDN router at 192.168.1.100. In this example: • The Destination IP Address and IP Subnet Mask
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 75
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual • The Gateway IP Address field specifies that all traffic for these addresses should be forwarded to the ISDN router at 192.168.1.100. • A Metric value of 1 will work since the ISDN router is on the LAN. • Private is selected only as a precautionary
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 76
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 6. In the Destination IP Address field, enter the IP address of the final destination. 7. In the IP Subnet Mask field, enter the IP subnet mask for this destination. If the destination is a single host, enter 255.255.255.255. 8. In the Gateway IP
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 77
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual To set up a wireless network using WDS, the following conditions must be met for both APs: • Both APs must use the same SSID, wireless channel, and encryption mode (see "Choosing Appropriate Wireless Security" on page 2-1 or "Using WPS Push Button
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 78
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual • Wireless Base Station. The wireless router acts as the parent AP, bridging traffic to and from the child repeater AP, as well as handling wireless and wired local computers. To configure this mode, you must know the MAC addresses of the child
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 79
    AP. To configure a JWNR2000 router as a repeater unit: 1. If you are using the same model of wireless router for both the base station and repeaters, you must change the LAN IP address for each repeater to a different IP address in the same subnet (see "Using the LAN IP Setup Options" on page
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 80
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 4-16 Customizing Your Network Settings v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 81
    5-14 • "Optimizing Wireless Performance" on page 5-15 • "Changing the MTU Size" on page 5-16 • "Quality of Service" on page 5-18 • "Overview of Home and Small Office Networking Technologies" on page 5-24 Allowing Inbound Connections to Your Network By default, the JWNR2000 router blocks any inbound
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 82
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual How Your Computer Accesses a Remote Computer through Your Router When a computer on your network needs to access a computer on the Internet, your computer sends your router a message containing source and destination address a service number
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 83
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 4. The Web server at www.example.com composes a return message with the requested Web page data. The return message contains the following address and port information: • The source address is the IP address of www.example.com. • The source port
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 84
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual "When you initiate a session with destination port 6667, The router replaces the message's destination IP address with your computer's IP address and forwards the message to your computer. 8. When you finish your chat session, your router eventually
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 85
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual How Port Forwarding Changes the Communication Process In Web server then sends this reply message to your router. 4. Your router performs Network Address Translation (NAT) on the source IP address, and sends this request message through the Internet
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 86
    computer that will provide the service. Be sure the computer's IP address never changes. Tip: To ensure that your server computer always has the same IP address, use the reserved IP address feature of your JWNR2000 router. See "Using Address Reservation" on page 4-5 for instructions on how to use
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 87
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual To configure port forwarding to a local server: 1. Select Port Forwarding/Port Triggering under Advanced in the main menu. The Port Forwarding/Port Triggering screen displays. Figure 5-1 2. From the Service Name list, select the service or game
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 88
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2. Click Add Service (see Figure 5-1 on page 5-7).The Ports-Custom Services screen displays. Figure 5-2 3. In the Service Name field, enter a descriptive name. 4. In the Service Type field, select the protocol. If you are unsure, select TCP/UDP. 5.
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 89
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Editing or Deleting a Port Forwarding Entry To edit or delete a port forwarding entry: 1. In the table, select the button next to the service name. Figure 5-3 2. Click Edit Service or Delete Service to make changes. 3. Click Apply. Application
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 90
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual router detects outbound traffic on that port, it remembers the IP address of the local computer that sent the data. The router also enable Universal Plug and Play (UPnP) according to the instructions in "Using Universal Plug and Play" on page 5-14.
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 91
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2. Select the Port Triggering radio button. The port triggering port triggering is disabled. However, any port triggering configuration information you added to the router is retained even though it is not used. 4. In the Port Triggering Timeout
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 92
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 5. Click Add. the Port Triggering-Services screen displays. Figure 5-5 6. In the Service Name field, enter a descriptive service name. 7. In the Service User field, select Any (the default) to allow this service to be used by any computer on the
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 93
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 11. Click Apply. The service appears in the Port Triggering Portmap table. Figure 5-6 Fine-Tuning Your Network v1.0, February 2010 5-13
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 94
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Using Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, to access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 95
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual • Advertisement Period. The advertisement period is how often the router broadcasts its Table. The UPnP Portmap Table displays the IP address of each UPnP device that is currently accessing the router and which ports (Internal and External) that
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 96
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual • Choose placement carefully. For best results, place your router: - Near the center of the area in which your computers will operate. - In an elevated location such as a high shelf where the wirelessly connected computers have line-of-sight access
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 97
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual The best MTU setting for NETGEAR equipment is often just the default value, and changing the value might fix one problem but cause another. Leave MTU unchanged unless one of these situations occurs: • You have problems connecting to your ISP, or
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 98
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual To change the MTU size: 1. In the main menu, under Advanced, select WAN Setup. 2. In the MTU Size field, enter a new size between 64 and 1500. 3. Click Apply to save the new configuration. Quality of Service Quality of Service (QoS) is an advanced
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 99
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual From the main menu of the browser interface, under Advanced, select QoS Setup. The QoS Setup screen displays: Figure 5-8 WMM QoS is enabled by default. You can disable it by clearing the Enable WMM check box and clicking Apply. QoS for
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 100
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2. Click Setup QoS rule. The QoS - Priority Rules screen displays. Figure 5-9 For convenience, the QoS Policy table lists many common applications and online games that can benefit
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 101
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 3. Click Add Priority Rule. The QoS - Priority Rules screen displays. Figure 5-10 4. In the Priority Category list, select either Applications or Online Gaming. In either
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 102
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 6. From the Priority drop-down list, select the 6. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen. 7. In the QoS Setup screen, select the Turn Internet Access QoS On check box. 8. Click Apply. 5-22 v1.0,
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 103
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual QoS for a MAC Address To create a QoS policy for traffic from a specific MAC address: 1. From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays, as shown in Figure 5-8 on page 5-19. 2. Click Add Priority Rule. 3. From
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 104
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Editing or Deleting an Existing QoS Policy To edit or delete an existing QoS policy: 1. From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays, as shown in Figure 5-8 on page 5-19. 2. Select the radio button next to the
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 105
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual To get the best performance, use RangeMax NEXT adapters such as the WN511B for your computers. Although the RangeMax NEXT router is compatible with older 802.11b and 802.11g adapters, the use of these older wireless up to 100 meters with twisted
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 106
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual • Backing up computers over the network has become popular due to Connection Gigabit wired Ethernet RangeMax NEXT Wireless-N Powerline HD 100 Mbps wired Ethernet 802.11n wireless 802.11g wireless 802.11b wireless 10 Mbps wired Ethernet Cable modem
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 107
    Monitoring Tools This chapter describes how to use the maintenance features of your Wireless-N 300 Router Model JWNR2000. This chapter includes the following sections: • "Viewing Wireless Router Status Information" • "Viewing a List of Attached Devices" on page 6-7 • "Managing the Configuration File
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 108
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Viewing Wireless Router Status Information To view router status and usage information: 1. Select Router Status under Maintenance in the main menu. The Router Status screen displays. Figure 6-1 6-2 v1.0, February 2010 Using Network Monitoring
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 109
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Table 6-1 describes the router status fields. Table 6-1. Wireless Router Status Fields Field Description Hardware Version The hardware version of the router. Firmware Version The version of the current software installed in the router. This
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 110
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Table 6-1. Wireless Router Status Fields (continued) Field Description Wireless Port. The following settings apply to the wireless port of the router. Name (SSID) The wireless network name (SSID) being used by the wireless port of the router.
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 111
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2. Click Connection Status to display the connection status. Figure 6-2 Table 6-2 describes the connection status settings. Table 6-2. Connection Status Settings Item IP Address Subnet Mask Default Gateway DHCP Server DNS Server Lease Obtained
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 112
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 3. Click Show Statistics to display router usage statistics. Figure 6-3 Table 6-3 describes the router statistics. Table 6-3. Router Statistics Item System Up Time Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time Poll Interval
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 113
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Viewing a List of Attached Devices The Attached Devices screen contains a table of all IP devices that the router has discovered on the local network. Select Attached Devices under Maintenance in the main menu to view the table. Figure 6-4 For each
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 114
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Select Backup Settings under Maintenance in the main menu. The have located it, click Restore to send the file to the router. The router then reboots automatically. Warning: Do not interrupt the reboot process. 6-8 Using Network Monitoring Tools
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 115
    when you do not know the login password or IP address, you must use the restore factory settings button on the rear panel of the router (see "Restoring the Default Configuration and Password" on page 7-11). Updating the Router Firmware The firmware of the JWNR2000 router is stored in flash memory
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 116
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Checking for New Firmware in the Router Upgrade Screen To check for new firmware and allow the router to automatically install it: 1. Select Router Upgrade under Maintenance in the main menu. The Router Upgrade screen displays. Figure 6-6 2. Check
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 117
    to New Router Firmware To manually select, download, and install new software to your router: 1. Log in to your router, select Router Status under Maintenance on the main menu, and make note of the firmware version of your router. Figure 6-9 2. Go to the JWNR2000 support page on the NETGEAR website
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 118
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 3. Compare the version number of the most recent firmware offered to the firmware version of your router. If the version on the NETGEAR website is more recent, download the file from the JWNR2000 support page to your computer. 4. Log in to your
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 119
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Enabling Remote Management Access Using the Remote Management feature, you can allow a user on the Internet to configure, upgrade, and check the status of your JWNR2000 router. Select Remote Management under Advanced in the main menu. The Remote
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 120
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 2. Under Allow Remote Access By, specify what external IP addresses will be allowed to access the router's remote management. Note: For enhanced security, restrict access to as few external IP addresses as practical. • To allow access from any IP
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 121
    chapter provides information about troubleshooting your Wireless-N 300 Router Model JWNR2000. After each problem description, instructions are provided to help you diagnose and solve the problem. As a first step, please review the Quick Tips. Tip: NETGEAR provides helpful articles, documentation
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 122
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 4. Turn on the wireless router and wait 1 minute. 5. Turn on the computers. Make sure that the Ethernet cables are securely plugged in. • The Internet status light on the wireless router is on if the Ethernet cable connecting the wireless router and
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 123
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 3. After approximately 20 seconds, verify adapter supplied by NETGEAR for this product. If the error persists, you have a hardware problem and should contact Technical Support. The Power light blinks green slowly and continuously (Case 1). The router
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 124
    you are using Ethernet cables like the cable that was supplied with the wireless router. See the NETGEAR Wireless Router Setup Manual for instructions. Login Problems If you are unable to log in to the wireless router, check the following: • If you are using an Ethernet-connected computer, check
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 125
    an IP address is shown for the Internet Port. If 0.0.0.0 is shown, your wireless router has not obtained an IP address from your service provider. If your router is unable to obtain an IP address from the your service provider, the problem might be one of the following: Troubleshooting 7-5 v1
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 126
    your computer's MAC address. On the Basic Settings screen in the Router MAC Address section, select "Use this Computer's MAC Address" and click Apply. Then restart your network in the correct sequence (see the NETGEAR Wireless Router Setup Manual for instructions). Troubleshooting PPPoE If you are
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 127
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Troubleshooting Internet Browsing If your wireless router can obtain an IP address but your computer is unable to load any web pages from the Internet, check the following: • Your computer might not recognize any DNS server addresses. A DNS server
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 128
    configuration - Verify that the Ethernet card driver software and TCP/IP software are both installed and configured on your computer. - Verify that the IP address for your router and your computer are correct and that the addresses are on the same subnet. 7-8 Troubleshooting v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 129
    " the MAC address from the authorized computer. For more information, see "Using the Setup Manual" on page 1-1. Problems with Date and Time Select E-mail under Content Filtering in the main menu to display a screen that shows the current date and time of day. The JWNR2000 router uses the Network
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 130
    . Problems with Wireless Adapter Connections If your wireless adapter is unable to connect, check its connection settings. To check the adapter's connection settings: 1. open the adapter setup utility to check connections: • NETGEAR Smart Wizard utility. If you installed a NETGEAR wireless adapter
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 131
    . If the wireless router fails to restart, or the Power light continues to blink or turns solid amber, the unit might be defective. If the error persists, you might have a hardware problem and should contact Technical Support at http://www.netgear.com/support. Troubleshooting v1.0, February
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 132
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual 7-12 v1.0, February 2010 Troubleshooting
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 133
    JWNR2000. Table A-1. JWNR2000 Router Default Configuration Settings Feature Router Login Router Login URL Login Name (case-sensitive) printed on product label Login Password (case-sensitive) printed on product label Internet Connection WAN MAC Address MTU Size Local Network Router LAN IP address
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 134
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual Table A-1. JWNR2000 Router Default Configuration Settings (continued) Wireless Wireless Communication SSID Name Security Wireless Access List (MAC Filtering) Broadcast SSID Transmission Speed Country/Region RF Channel Operating Mode Data Rate
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 135
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual General Specifications Table A-2. JWNR2000 Router General Specifications Feature General Network Protocol and Standards Compatibility Data and Routing Protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, and UPnP Power
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 136
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual A-4 Technical Specifications v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 137
    index.htm http://documentation.netgear.com/reference/enu/vpn/index.htm http://documentation.netgear.com/reference/enu/glossary/index.htm In addition, you can find initial setup instructions for your wireless router in the NETGEAR Wireless Router Setup Manual. Related Documents B-1 v1.0, February
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 138
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual B-2 Related Documents v1.0, February 2010
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 139
    2-19 to a remote computer 5-2 to the router 1-2 viewing logs 3-6 access control turning off 1-13 turning on 2-21 access points 4-12 account name 1-8 adding custom service 5-7 priority rules 5-18 reserved IP addresses 4-5 static routes 4-11 wireless clients 2-13, 2-18, 6-4 See also configuring
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 140
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual content filtering 3-1 CTS/RTS Threshold 2-13 custom service (port forwarding) 5-7 customer support ii D data packets, fragmented 5-16 date and time, troubleshooting fixed font text xi fixed IP addresses 1-8 Fragmentation Threshold 2-13 fragmented
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 141
    servers, port forwarding to 5-6 logging in 1-2 login required 1-9 login settings A-1 logout, automatic 1-5 logs sending 3-7 time-stamping entries 3-9 viewing 3-6 NETGEAR Wireless-N 300 Router JWNR2000 User Manual M MAC addresses attached devices 6-7 current 6-3 entering 1-8 restricting access
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 142
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual placement, router 5-16 poll interval 6-6 port filtering 3-3 port forwarding configuring 5-6 example 5-5 port numbers 3-3 port status 6-6 port triggering configuring 5-10 example 5-3 portmap table 5-15 power adapter specifications A-3 Power light,
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 143
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual speed requirements 5-25 SPI (Stateful Packet Inspection) firewall 4-8 spoofing MAC addresses 1-8, 7-7 SSID 1-12, 2-7, 6-4 SSID broadcast 1-13, 2-12 standards, compatibility A-3 static IP addresses 1-8 static routes 4-10 statistics, usage 6-6 status
  • Netgear JWNR2000v1 | JWNR2000 User Manual (PE/UK) - Page 144
    NETGEAR Wireless-N 300 Router JWNR2000 User Manual testing 1-11 WMM (Wi-Fi Multimedia) 5-18 WPA2-PSK encryption 2-3, 2-10 WPA-PSK + WPA2-PSK encryption 2-3, 2-10 WPA-PSK encryption 2-3, 2-10 Index-6 v1.0, February 2010
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
202-10625-01
February 2010
v1.0
NETGEAR
, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
NETGEAR Wireless-N
300 Router JWNR2000
User Manual