Netgear KWGR614-100NAS KWGR614 Reference Manual

Netgear KWGR614-100NAS - KWGR614 Open Source Wireless-G Router Wireless Manual

Get Netgear KWGR614-100NAS - KWGR614 Open Source Wireless-G Router Wireless PDF manuals and user guides
UPC - 606449049893
View all Netgear KWGR614-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear KWGR614-100NAS manual content summary:

  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 1
    54Mbps Wireless Router Model KWGR614 Reference Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA September 2006
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 2
    transmitting structures. FCC Statement: DECLARATION OF CONFORMITY We Netgear, 4500 Great America Parkway, Santa Clara, CA 95054, USA, Tel: +1 408 907 8000, declare under our sole responsibility that the product(s) KWGR614 (Model Designation) Wireless Router (Product Name) complies with Part 15 of
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 3
    with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not one or more of the following measures: • • Reorient or locate the receiving antenna. • • Increase the separation between the equipment and receiver. • • Connect
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 4
    is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Èesky [Czech] NETGEAR, Inc. tímto prohlašuje, že tento 54Mbps Wireless Router Model KWGR614 je ve shodì se základními požadavky a dalšími pøíslušnými ustanoveními smìrnice 1999/ 5/ES. Dansk
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 5
    /5/EG. Malti [Maltese] Hawnhekk, NETGEAR, Inc., jiddikjara li dan 54Mbps Wireless Router Model KWGR614 jikkonforma mal-tiijiet essenzjali u ma is hereby certified that the 54Mbps Wireless Router Model KWGR614 has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 6
    an adjacent area thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data instructions for correct handling. Customer Support Refer to the Support Information Card that shipped with your 54Mbps Wireless Router Model KWGR614. World Wide Web NETGEAR
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 7
    Router 1-4 Maintenance and Support 1-4 Chapter 2 Wireless Configuration Observing Performance, Placement, and Range Guidelines 2-1 Implementing Appropriate Wireless Security 2-2 Understanding Wireless Settings 2-3 Information to Gather Before Changing Basic Wireless Settings 2-7 Default
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 8
    4-2 Viewing Wireless Router Status Information 4-5 Viewing a List of Attached Devices 4-9 Configuration File Management 4-10 Restoring and Backing Up the Configuration 4-10 Erasing the Configuration 4-11 Upgrading the Router Software 4-11 Changing the Administrator Password 4-13 Chapter
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 9
    the ISP Connection 6-3 Troubleshooting a TCP/IP Network Using a Ping Utility 6-5 Testing the LAN Path to Your Router 6-5 Testing the Path from Your Computer to a Remote Device 6-6 Restoring the Default Configuration and Password 6-7 Problems with Date and Time 6-7 Appendix A Technical
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 10
    x v1.2, September 2006
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 11
    Appendices and on the Netgear website. This guide uses the following typographical conventions: Table 1. Typographical Conventions italics bold fixed Emphasis, books, CDs, URL names User input Screen text, file and server names, extensions, commands, IP addresses This guide uses the following
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 12
    is written for the 54Mpbs Wireless Router according to these specifications: Table 2. Manual Scope Product Version Manual Publication Date 54Mbps Wireless Router Model KWGR614 September 2006 Note: Product updates are available on the NETGEAR, Inc. Web site at http://www.netgear.co.kr. How to Use
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 13
    54Mbps Wireless Router Model KWGR614 Reference Manual How to Print this Manual To print this manual you can choose one of the following several options, according to your needs. • Printing a Page in the HTML View. Each page in the HTML version of the manual is dedicated to a major topic. Use the
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 14
    54Mbps Wireless Router Model KWGR614 Reference Manual xiv v1.2, September 2006
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 15
    Wireless Router Model KWGR614. • Plastic feet for standing the wireless router on end. • AC power adapter. • Category 5 (CAT5) Ethernet cable. • Resource CD, including: - The Setup Manual - Application Notes and other helpful information. • Registration and Warranty Card. • Support Information
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 16
    54Mbps Wireless Router Model KWGR614 Reference Manual The Router's Front Panel The front panel of the 54Mpbs Wireless Router contains the status lights described below. 2 4 1 3 5 Figure 1-1 You can use the status lights to verify connections. Viewed from left to right, the table below
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 17
    Wireless Router Model KWGR614 Reference Manual Table 1-1. Status Light Descriptions On -- Amber 4. Internet On -- Green Blink -- Green On (Green) 5. LAN (Local Blink (Green) Area Network) On (Amber) Lights 1-4 Blink (Amber) Off The Ethernet cable is connected but the wireless router
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 18
    Router Model KWGR614 Reference Manual 4. Factory Default Reset push button for Restoring the Default Configuration and Password 5. Wireless antennae Installing the 54Mpbs Wireless Router For installation instructions refer to the setup manual that came on the CD. Maintenance and Support NETGEAR
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 19
    if through walls). • Away from sources of interference, such as computers, microwaves, and 2.4 GHz cordless phones. • Away from large metal surfaces. The time it takes to establish a wireless connection can vary depending on both your security settings and placement. Wired Equivalent Privacy (WEP
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 20
    54Mbps Wireless Router Model KWGR614 Reference Manual Implementing Appropriate Wireless Security Note: Indoors, computers can connect over 802.11b/g wireless test equipment like wireless sniffers. • WEP. Provides data security. WEP Shared Key authentication and WEP data encryption will block all but
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 21
    Understanding Wireless Settings To configure the Wireless settings of your wireless router, type http://www.routerlogin.net into your internet browser. Enter the default user name of admin and default password of password, or whatever LAN address and password you have set up. Click the Wireless link
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 22
    to participate in a particular wireless network will need to use this SSID for that network. The KWGR614 default SSID is: NETGEAR. • Region. This field identifies the region where the KWGR614 can be used. It may not be legal to operate the wireless features of the wireless router in a region other
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 23
    54Mbps Wireless Router Model KWGR614 Reference Manual Table 2-1. Basic Wireless Security Options Field Description None No wireless security. WEP WEP offers the following options: • Open System With Open Network Authentication and 64- or 128-bit WEP Data Encryption, the KWGR614 does perform
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 24
    Model KWGR614 Reference Manual To configure the advanced wireless settings of your wireless router, click the Wireless Setup link in the Advanced section of the main menu of the browser interface. The Advanced Wireless Settings menu appears, as shown below. Figure 2-3 • Enable Wireless Router Radio
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 25
    54Mbps Wireless Router Model KWGR614 Reference Manual Information to Gather Before Changing Basic Wireless Settings Before customizing your wireless settings, print this form and record the following information. If you are working with an existing wireless network, the person who set up or is
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 26
    you first receive your KWGR614, the default factory settings are in effect as shown below. You can restore these defaults with the Factory Default Restore button on the rear panel. After you install the 54Mpbs Wireless Router, use the procedures below to customize any of the settings to better meet
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 27
    appropriate to your needs. 1. Log in to the KWGR614 wireless router at URL http://www.routerlogin.net. Enter the default user name of admin and default password of password, or whatever LAN address and password you have set up. 2. Click Wireless Settings in the Setup section of the main menu of the
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 28
    SSID you configure in the 54Mbps Wireless Router Model KWGR614. If they do not match, you will not get a wireless connection to the KWGR614. 4. Set the Region. Select the region in which the wireless interface will operate. 5. Set the Channel. The default channel is 6. This field determines which
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 29
    1. Log in to the KWGR614 wireless router using URL http://www.routerlogin.net. Enter the default user name of admin and default password of password, or whatever LAN address and password you have set up. 2. Click Wireless Settings in the main menu of the KWGR614 wireless router. 3. From the Security
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 30
    54Mbps Wireless Router Model KWGR614 Reference Manual 4. Select the Authentication Type and Encryption Strength from the drop-down lists. Figure 2-5 5. You can manually or automatically program the four data encryption keys. These values must be identical on all computers and Access Points in your
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 31
    Wireless Router Model KWGR614 Reference Manual • Automatic-enter a word or group of printable characters in the Passphrase box and click the Generate button. The passphrase is case sensitive; NETGEAR is not the same as nETgear. The four key boxes are automatically populated with key values. • Manual
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 32
    54Mbps Wireless Router Model KWGR614 Reference Manual 1. Click Wireless Settings in the Setup section of the IEEE 802.11i standard, and is the default encryption method for WPA2-PSK. The AUTO setting allows the wireless router to connect to wireless clients using either the TKIP or AES encryption
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 33
    steps: 1. Log in to the KWGR614 wireless router at URL http://www.routerlogin.net. Enter the default user name of admin and default password of password, or whatever LAN address and password you have set up. Note: When configuring the wireless router from a wireless computer whose MAC address is not
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 34
    54Mbps Wireless Router Model KWGR614 Reference Manual 4. Select the Turn Access Control On check box. 5. Click Add to add a wireless device to the wireless access control list. The Wireless Card Access Setup dialog displays. Figure 2-8 6. In the Available Wireless Cards list, either select from the
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 35
    . Content Filtering Overview The 54Mbps Wireless Router Model KWGR614 provides you with Web content filtering options, plus browsing activity reporting and instant alerts via e-mail. Parents and network administrators can establish restricted access policies based on time of day, Web addresses and
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 36
    Wireless Router Model KWGR614 Reference Manual Blocking Access to Internet Sites The 54Mpbs Wireless Router allows you to restrict access based on Web addresses and Web address keywords. Up to 255 entries are supported time period in the Schedule menu, as described in "Scheduling When Blocking Will
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 37
    54Mbps Wireless Router Model KWGR614 Reference Manual To add a keyword or will be exempt from blocking and logging. Since the Trusted User will be identified by an IP address, you should configure that computer with a fixed IP address. Blocking Access to Internet Services The 54Mpbs Wireless Router
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 38
    54Mbps Wireless Router Model KWGR614 Reference Manual Services are functions performed by server computers at the request of client computers. For example, Web servers serve Web pages, time servers serve time and date information, and game hosts serve data about other players' moves. When a computer
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 39
    54Mbps Wireless Router Model KWGR614 Reference Manual Configuring a User Defined Service To define a service, first you must determine which port number or range of numbers is used by the application. The service numbers for many common protocols are defined by the Internet Engineering Task Force (
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 40
    Wireless Router Model KWGR614 Reference Manual Scheduling When Blocking Will Be Enforced The 54Mpbs Wireless Router allows you to specify when blocking will "Every day" to check the boxes for all days. • Time of Day to Block. Select a start and end time in 23:59 format. Select "All Day" for 24 hour
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 41
    54Mbps Wireless Router Model KWGR614 Reference Manual Viewing Logs of Web Access or Attempted Web Access The log is a detailed record of what Web sites you have accessed or attempted to access. Up to 128 entries are stored in the log. Log entries will only appear when keyword blocking is enabled,
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 42
    54Mbps Wireless Router Model KWGR614 Reference Manual Log action buttons are described in Table 3-2. Table 3-2. Log action buttons Field Refresh Clear Log Send Log Description Click this button to refresh the log
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 43
    54Mbps Wireless Router Model KWGR614 Reference Manual Configuring E-Mail Alert and Web Access Log Notifications In order to receive logs and alerts by E-mail Notification On-Check this box if you wish to receive e-mail logs and alerts from the router. Content Filtering 3-9 v1.2, September 2006
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 44
    54Mpbs Wireless Router uses the Network Time Protocol (NTP) to obtain the current time and date from one of several Network Time Servers on the Internet. In order to localize the time for your log entries, you must specify your Time Zone: • Time Zone-Select your local time zone. This setting will be
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 45
    Chapter 4 Maintenance This chapter describes how to use the maintenance features of your 54Mbps Wireless Router Model KWGR614. These features can be found in the Setup and Maintenance sections in the Main Menu of the browser interface. 4-1 v1.2, September 2006
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 46
    54Mbps Wireless Router Model KWGR614 Reference Manual How to Manually Configure Your Internet Connection You can manually configure your router using the Basic Settings menu, shown below. ISP Does Not Require Login ISP Does Require Login Figure 4-1 You can manually configure the router using the
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 47
    54Mbps Wireless Router Model KWGR614 Reference Manual 2. For security reasons, the wireless router has its own user name and password. When prompted, enter admin for the router user name and password for the router password, both in lower case letters. 3. Click Basic Settings on the Setup menu. 4.
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 48
    54Mbps Wireless Router Model KWGR614 Reference Manual 5. If your Internet connection does require a login, fill in the settings according to the instructions below. Select Yes if you normally must launch a login program such as Enternet or WinPOET in order to access the Internet. Note: After you
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 49
    54Mbps Wireless Router Model KWGR614 Reference Manual Viewing Wireless Router Status Information The Router Status menu provides status and usage information. From the Maintenance section of the Main Menu, click Router Status to view the Router Status screen, shown below. Figure 4-3 This screen
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 50
    Address (BSSID) The Basic Service Set IDentifier (BSSID) is the MAC address being used by the wireless port (WLAN) of the router. Name (SSID) This field displays the wireless network name (SSID) being used by the wireless port of the router. The default is NETGEAR. Region This field displays
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 51
    54Mbps Wireless Router Model KWGR614 Reference Manual Table 4-1. Wireless Router Status Fields Field Wireless AP Broadcast Name Description Indicates if the Access Point feature of the Router is enabled. If not enabled, the Wireless LED on the front panel will be off. Indicates if the router is
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 52
    54Mbps Wireless Router Model KWGR614 Reference Manual Table 4-2: Connection Status Items (continued) Item DNS Server Lease Obtained Lease Expires Release Renew Description The IP address of the DNS server which provides network name to IP address translation. When the DHCP lease was obtained.
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 53
    Wireless Router Model KWGR614 Reference Manual Table 4-3: Item Tx B/s Rx B/s Up Time Poll Interval Set Interval Stop Router Statistics Items Description The current transmission (outbound) bandwidth used on the LAN ports. The current reception (inbound) bandwidth used on the LAN ports. The time
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 54
    KWGR614 Reference Manual Configuration File Management The configuration settings of the 54Mpbs Wireless Router are stored within the router in a configuration file. This file can be saved (backed up) to a user's computer, retrieved (restored) from the user's computer, or cleared to factory default
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 55
    the Default Reset button on the rear panel of the router. See "Restoring the Default Configuration and Password" on page 6-7. Upgrading the Router Software Note: Before upgrading the router software, use the router backup utility to save your configuration settings. Any router upgrade will revert
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 56
    54Mbps Wireless Router Model KWGR614 Reference Manual The routing software of the 54Mpbs Wireless Router is stored in FLASH memory, and can be upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from the NETGEAR Web site. If the upgrade file is compressed (.ZIP file),
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 57
    Wireless Router Model KWGR614 Reference Manual Changing the Administrator Password Note: Before changing the router password, use the router backup utility to save your configuration settings. If after changing the password, you forget the new password you assigned, you will have to reset the router
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 58
    54Mbps Wireless Router Model KWGR614 Reference Manual 4-14 v1.2, September 2006 Maintenance
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 59
    your 54Mbps Wireless Router Model KWGR614. These features the instructions at "Using Universal Plug and Play (UPnP)" on page -17. Port Triggering opens an services. Once port forwarding is set up, a request from the Internet will be forwarded to the proper server. In contrast, port triggering will
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 60
    54Mbps Wireless Router Model KWGR614 Reference Manual Figure 5-1 Note: If the Disable Port Triggering box is checked after configuring port triggering, port triggering will be disabled but any port triggering configuration information you added to the router will be retained even though it will not
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 61
    1. Click Add Service. 54Mbps Wireless Router Model KWGR614 Reference Manual Figure 5-2 2. Enter a service name in the Service Name box. 3. In the Service User box, selecting the default value of Any allows the service to be used by everyone in your network. Otherwise, to restrict the service to a
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 62
    54Mbps Wireless Router Model KWGR614 Reference Manual Configuring for Port Forwarding to Local Servers Although the router causes your entire local network to appear as a single machine to the Internet, you can make a local server (for example, a Web server or game server)
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 63
    Router Model KWGR614 Reference Manual Note: To assure that the same computer always has the same IP address, use the reserved IP address feature of your 54Mpbs Wireless Router. See "Using Address Reservation" on page 5-11 for instructions on how to use reserved IP addresses. 1. From the Service
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 64
    Wireless Router Model KWGR614 Reference Manual IP address (172.16.1.23 in this example) will fail. Multiple Computers for Internet Game Example To set up an additional computer to play an Internet game: 1. Select the game again from the Services/Games list. 5-6 Advanced Configuration of the Router
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 65
    host, enter its IP address as the default. Configuring the WAN Setup Options The WAN Setup options let you configure a DMZ server, change the MTU size and enable the wireless router to respond to a Ping on the WAN port. These options are discussed below. Setting Up a Default DMZ Server The
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 66
    54Mbps Wireless Router Model KWGR614 Reference Manual If you are willing to risk open access, the WAN Setup menu shown below lets you configure a Default DMZ Server. Figure 5-5 To assign a computer or server to be a Default DMZ server, follow these steps: 1. Click the WAN Setup link on the Advanced
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 67
    Wireless Router Model KWGR614 Reference Manual Setting the MTU Size The default will be repackaged into smaller packets to meet the MTU requirement. To change the MTU size: 1. Under MTU Size, enter a new size between 64 and 1500. 2. Click Apply to save the new configuration. Using the LAN IP Setup
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 68
    54Mbps Wireless Router Model KWGR614 Reference Manual Configuring LAN TCP/IP Setup Parameters The router is shipped preconfigured to use private IP addresses on the LAN side, and to act.as a DHCP server. The router's default LAN IP configuration is: • LAN IP addresses-192.168.1.1 • Subnet mask-255.
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 69
    54Mbps Wireless Router Model KWGR614 Reference Manual The router will deliver the following parameters to any LAN device that requests DHCP: • An IP Address from the range you have defined • Subnet Mask • Gateway IP Address (the router's LAN IP address) • Primary DNS Server (if you entered a Primary
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 70
    54Mbps Wireless Router Model KWGR614 Reference Manual Using a Dynamic DNS Service If your network has a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers (DNS). However, if your Internet account uses a
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 71
    54Mbps Wireless Router Model KWGR614 Reference Manual 3. Check the Use a dynamic DNS service check box. 4. Select your dynamic DNS Service Provider from the Service Provider box. 5. Type the Host Name (or domain name) that your dynamic DNS service provider gave you. 6. Type the User Name for your
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 72
    54Mbps Wireless Router Model KWGR614 Reference Manual 1. Click the Add button to open the Add/Edit Menu. Figure The static route will not be reported in RIP. 4. Select Active to make this route effective. 5. Type the Destination IP Address of the final destination. 6. Type the IP Subnet Mask for
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 73
    can allow a user or users on the Internet to configure, upgrade and check the status of your 54Mpbs Wireless Router. Note: Be sure to change the router's default configuration password to a very secure password. The ideal password should contain no dictionary words from any language, and should be
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 74
    54Mbps Wireless Router Model KWGR614 Reference Manual 1. From the Main Menu of the browser interface, under Advanced, click on Remote Management Figure 5-10 2. Check the Turn Remote Management On check box. 3. Specify what external addresses will be allowed to access the router's remote management.
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 75
    Wireless Router Model KWGR614 Reference Manual 5. Click Apply to have your changes take effect. Note: When accessing your router from the Internet, you will type your router's WAN IP address into your browser's Address (in IE) or Location (in Netscape) box, followed by a colon (:) and the custom
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 76
    54Mbps Wireless Router Model KWGR614 Reference Manual • UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each UPnP device that is currently accessing the router and which ports (Internal and External) that device has opened. The UPnP Portmap Table also displays what type of port
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 77
    54Mbps Wireless Router Model KWGR614 Reference Manual 2. If the Internet service, game, or application is listed in the Service Name list, select it and click the Add button beside the Service Name list. The service will be added to the list of Application-based QoS services with the Starting Port
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 78
    54Mbps Wireless Router Model KWGR614 Reference Manual d. If only one destination port is associated with the service, type the same port number in the Ending Port box as you typed in the Starting Port box. Otherwise, type a higher port number to assign
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 79
    This chapter gives information about troubleshooting your 54Mbps Wireless Router Model KWGR614. After each problem description, instructions are provided to help you diagnose and solve the problem. Basic Functioning After you turn on power to the router, the following sequence of events
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 80
    's configuration to factory defaults. This will set the router's IP address to www.routerlogin.net. This procedure is explained in "Restoring the Default Configuration and Password" on page -7. If the error persists, you might have a hardware problem and should contact technical support. LAN or
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 81
    been changed and you do not know the current IP address, clear the router's configuration to factory defaults. This will set the router's IP address to www.routerlogin.net. This procedure is explained in "Restoring the Default Configuration and Password" on page -7. • Make sure your browser has Java
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 82
    54Mbps Wireless Router Model KWGR614 Reference Manual To check the WAN IP address: 1. Launch your browser and select an external site such as www.netgear.com. 2. Access the Main Menu of the router's configuration at http://www.routerlogin.net. 3. Under the Maintenance heading, select Router Status.
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 83
    54Mbps Wireless Router Model KWGR614 Reference Manual • Your computer may not recognize any DNS server addresses. A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 84
    54Mbps Wireless Router Model KWGR614 Reference Manual If the path is not functioning correctly, you could have one of the following problems: • Wrong physical connections - Make sure the LAN port LED is on. If the LED is off, follow the instructions in "LAN or Internet Port Lights Not On" on page
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 85
    2. Release the Default Reset button and wait for the router to reboot. If the wireless router fails to restart or the test light stays on, the unit may be defective. If the error persists, you might have a hardware problem and should contact technical support. Problems with Date and Time The E-mail
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 86
    54Mbps Wireless Router Model KWGR614 Reference Manual • Time is off by one hour. Cause: The router does not automatically sense Daylight Savings Time. In the E-mail menu, select or clear the checkbox marked "Adjust for Daylight Savings Time". 6-8 Troubleshooting v1.2, September 2006
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 87
    for the 54Mbps Wireless Router Model KWGR614. Factory Default Settings Smart Wizard Enabled Router Login Default Access Router Login URL http://www. routerlogin.net or http://www.routerlogin.com Login Name (case sensitive) printed on product label admin Login Password (case sensitive) printed
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 88
    54Mbps Wireless Router Model KWGR614 Reference Manual Wireless Wireless Communication Enabled SSID Name NETGEAR Security Disabled Broadcast SSID Enabled Transmission Speed Auto* Country/Region Varies by region RF Channel 6 until region selected Operating Mode 802.11 g only/b only/g
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 89
    54Mbps Wireless Router Model KWGR614 Reference Manual General Specifications Network Protocol and Standards Compatibility Data and Routing Protocols: TCP/IP, RIP-1, RIP-2, DHCP, PPP over Ethernet (PPPoE), Pointto-Point Tunneling Protocol (PPTP), Telstra BigPond, L2TP (Layer 2 Tunneling Protocol)
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 90
    54Mbps Wireless Router Model KWGR614 Reference Manual A-4 Technical Specifications v1.2, September 2006
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 91
    of the technologies used in your NETGEAR product. Document Link Internet Networking and TCP/IP http://documentation.netgear.com/reference/enu/tcpip/index.htm Addressing Wireless Communications http://documentation.netgear.com/reference/enu/wireless/index.htm Preparing a Computer for Network
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 92
    54Mbps Wireless Router Model KWGR614 Reference Manual B-2 Related Documents v1.2, September 2006
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 93
    Basic Wireless Connectivity 2-9 Basic Wireless Settings 2-14 C configuration backup 4-10 erasing 4-11 restore 4-13 content filtering 3-1 conventions typography i-xi crossover cable 6-2 customer support 1-vi D date and time 6-7 Daylight Savings Time 6-8 daylight savings time 3-10 Default DMZ Server
  • Netgear KWGR614-100NAS | KWGR614 Reference Manual - Page 94
    factory settings 4-11 Restrict Wireless Access by MAC Address 2-15 Router Status 4-5 S Scope of Document i-xi Secondary DNS Server 4-3 service numbers 3-5 SMTP 3-10 spoof MAC address 6-4 SSID 2-4, 2-10 Start Port 5-5 Static Routes 5-12 Status Light 1-2 T TCP/IP network, troubleshooting 6-5 time of
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
September 2006
NETGEAR
, Inc.
4500 Great America Parkway
Santa Clara, CA 95054 USA
54Mbps Wireless Router
Model KWGR614
Reference Manual