Netgear PS104 PS110 Reference Manual

Netgear PS104 - Hub - EN Manual

Get Netgear PS104 - Hub - EN PDF manuals and user guides
UPC - 606449002164
View all Netgear PS104 manuals
Add to My Manuals
Save this manual to your list of manuals

Netgear PS104 manual content summary:

  • Netgear PS104 | PS110 Reference Manual - Page 1
    Installation and Reference for the Model PS104/PS105/ PS110 Print Server NETGEAR, Inc. A Bay Networks Company 4401 Great America Parkway Santa Clara, CA 95054 USA Phone 888-NETGEAR M-PS100NA-1 May 1999
  • Netgear PS104 | PS110 Reference Manual - Page 2
    B Declaration of Conformity NETGEAR Model PS104, Model PS105, and Model PS110 Print Servers digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
  • Netgear PS104 | PS110 Reference Manual - Page 3
    use the equipment according to the instruction manual. Customer Support For assistance with installing and configuring your NETGEAR system or with post-installation questions or problems, contact your point-of-purchase representative. To contact customer support or to purchase additional copies of
  • Netgear PS104 | PS110 Reference Manual - Page 4
    iv
  • Netgear PS104 | PS110 Reference Manual - Page 5
    on the Model PS104/PS105 Print Server 1-5 Chapter 2 Installation Preparing the Site ...2-1 Verifying Package Contents 2-1 Connecting Devices to the Print Server 2-2 Verifying Power ...2-3 Chapter 3 Microsoft Windows 95 and Windows 98 Printing FirstGear for Print Server 3-1 Installing and Setting
  • Netgear PS104 | PS110 Reference Manual - Page 6
    FirstGear-Diskette Option 3-23 Setting up the Print Server Using NetBEUI and TCP/IP 3-24 Configuring the Print Server Using NetBEUI 3-24 Configuring the Print Server Using TCP/IP 3-24 Chapter 4 Microsoft Windows NT Printing FirstGear for Print Server 4-1 Installing and Setting Up FirstGear-User
  • Netgear PS104 | PS110 Reference Manual - Page 7
    IP Address to the Print Server Using BootP 6-3 Assigning an IP Address to the Print Server Using RARP 6-4 Assigning an IP Address to the Print Server Using ARP 6-6 Configuring Your Print Server Using FTP 6-7 Configuration Example 6-7 List of FTP Files and Commands Supported by the Print Server
  • Netgear PS104 | PS110 Reference Manual - Page 8
    NetWare Print Server (PSERVER) Mode 7-21 NetWare Remote Printer (RPRINTER) Mode 7-23 Appendix A Technical Specifications General Specifications A-1 Appendix B Understanding IP Addresses IP Addresses and the Internet B-1 Netmask ...B-3 Subnet Addressing ...B-4 Private IP Addresses ...B-6 Address
  • Netgear PS104 | PS110 Reference Manual - Page 9
    Appendix D Using NetWare 5 NDPS Overview ...D-1 Creating an NDPS Manager Object D-1 Creating an NDPS Printer Agent D-3 Workstation Configuration D-5 Installing and Configuring the Public Access Printers D-5 Appendix E IP Setup Overview ...E-1 Index Contents ix
  • Netgear PS104 | PS110 Reference Manual - Page 10
    x Contents
  • Netgear PS104 | PS110 Reference Manual - Page 11
    3-17. Add Printer Wizard Window (Print Test Page 3-15 Figure 3-18. Add Port Window (Setup Complete 3-16 Figure 3-19. FirstGear Introductory Window 3-17 Figure 3-20. "Admin Installation" Option Window 3-18 Figure 3-21. NETGEAR Print Server Software Installation Window 3-19 Figure 3-22. Choose
  • Netgear PS104 | PS110 Reference Manual - Page 12
    Ports Screen 4-15 Figure 4-18. Add Printer Wizard Window (Print Test Page 4-16 Figure 4-19. Printer Select Window (End Setup 4-17 Figure 4-20. FirstGear Introductory Window 4-18 Figure 4-21. Admin Installation Option Window 4-19 Figure 4-22. NETGEAR Print Server Software Installation Window
  • Netgear PS104 | PS110 Reference Manual - Page 13
    7-7. NETGEAR Print Server Administration Program 7-2 FirstGear Setup Utility Quick Setup Screen 7-3 System Menu Tab Window 7-5 NetWare PServer Tab Window 7-7 NetWare RPrinter Tab Window 7-9 TCP/IP Menu Tab Window 7-10 Logical Port Menu Tab Window 7-12 Figure B-1. Three Main Address Classes
  • Netgear PS104 | PS110 Reference Manual - Page 14
    xiv Figures
  • Netgear PS104 | PS110 Reference Manual - Page 15
    System Menu Tab Fields 7-6 NetWare PSERVER Menu Tab Fields 7-7 NetWare RPrinter Menu Tab Fields 7-9 TCP/IP Menu Tab Fields 7-11 Logical Port Menu Tab Fields 7-13 Advanced Print Server Configuration Menu Bar Selections 7-14 Printer Menu Options 7-14 PSCONFIG Program Options 7-15 Tables xv
  • Netgear PS104 | PS110 Reference Manual - Page 16
    Table 7-10. Table 7-11. Table 7-12. Table 7-13. Table 7-14. Table 7-15. NetWare Print Server Mode Fields 7-17 TCP/IP Configuration Fields 7-18 NetBEUI Configuration Fields 7-19 Parameters and Definitions for Logical Printer Configuration 7-20 Parameters and Definitions for PSERVER Mode 7-22
  • Netgear PS104 | PS110 Reference Manual - Page 17
    Model PS104 Print Server, Model PS105 Print Server, and Model PS110 Print Server. If your network is operating in a Microsoft environment and you are using Microsoft® Windows® 95, Windows 98, or Windows NT®, refer to the Model PS104/PS105/ PS110 Print Server Quick Installation Guide (NETGEAR part
  • Netgear PS104 | PS110 Reference Manual - Page 18
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Conventions This section describes the conventions used in this guide. Special Message Formats This guide uses the following formats to highlight special messages: Note: This format is used to highlight information of importance
  • Netgear PS104 | PS110 Reference Manual - Page 19
    Microsoft Windows 95, Windows 98, or Windows NT, and have a network card installed with the NetBEUI protocol, refer to the Model PS104/Model PS105/Model PS110 Print Server Installation Guide (document part number M1-PS100NA-1). This guide provides instructions for installing the print servers by
  • Netgear PS104 | PS110 Reference Manual - Page 20
  • Netgear PS104 | PS110 Reference Manual - Page 21
    with FirstGear, NETGEAR configuration software that assures fast and easy setup for Windows 95, Windows 98, and Window NT users • Support for 10BASE-T Ethernet connection with four 10BASE-T ports on the Model PS104 Print Server, four 10BASE-T ports and a BNC port on the Model PS105 Print Server, or
  • Netgear PS104 | PS110 Reference Manual - Page 22
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Front Panel The LEDs that indicate the status of the server, ports, and printer are located on the front panels of the Model PS104 Print Server, the Model PS105 Print Server, and the Model PS110 Print Server as illustrated in
  • Netgear PS104 | PS110 Reference Manual - Page 23
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 1 2 3 4 10/100 Mbps Print Server MODEL PS110 PWR Link/Act Alert PRINTER 1 Link/Act Alert PRINTER 2 Link 100M Rx Tx Col NETWORK Key: 1 = PWR (power) LED 2 = PRINTER 1 LEDs 3 = PRINTER 2 LEDs 4 = Network LEDs
  • Netgear PS104 | PS110 Reference Manual - Page 24
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table 1-1. LED Descriptions (continued) Label Color Activity Description NETWORK (Model PS104 and PS105) • Link/Rx Green Off No link exists between the port and the network. On The 10 Mbps half-duplex link between
  • Netgear PS104 | PS110 Reference Manual - Page 25
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Rear Panel The rear panel of the Model PS104 Print Server and the Model PS105 Print Server has one parallel PRINTER port, and the rear panel of the Model PS110 Print Server has two parallel ports for printers (PRINTER 1 and
  • Netgear PS104 | PS110 Reference Manual - Page 26
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 1 2 3 4 PRINTER NETWORK 4 3 2 1 BNC 12VDC 1.2A Normal/Uplink Key: 1 = PRINTER Port 2 = Network Port (Four 10BASE-T and One BNC Connector) 3 = Normal/Uplink push button 4 = Power adapter receptacle Figure 1-5. Rear
  • Netgear PS104 | PS110 Reference Manual - Page 27
    Server • Power adapter • BNC terminator and T-connector (Model PS105 only) • Model PS104/PS105/PS110 Print Server Resource CD • Model PS104/PS105/PS110 Print Server Installation Guide • Warranty & Owner Registration Card • Customer Support Phone Card Call your reseller or NETGEAR Customer Support
  • Netgear PS104 | PS110 Reference Manual - Page 28
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Connecting Devices to the Print Server The Model PS104 Print Server has four 10BASE-T network ports. The Model PS105 Print Server has four 10BASE-T network ports and one BNC network port. The Model PS110 Print Server has one 10
  • Netgear PS104 | PS110 Reference Manual - Page 29
    and the software driver has been installed on the cards. If required, verify the integrity of the print server by resetting it. Turn power to the print server off and then back on. If the problem continues and you have completed all the preceding diagnoses, contact NETGEAR Customer Support. For the
  • Netgear PS104 | PS110 Reference Manual - Page 30
  • Netgear PS104 | PS110 Reference Manual - Page 31
    Model PS104/PS105/PS110 print server in a Microsoft Windows networking environment. To correctly configure your hardware and software for the Microsoft Windows platform, you must: • Install FirstGear for Print Server software. • Run Setup. • Configure the user PC to print to the NETGEAR print server
  • Netgear PS104 | PS110 Reference Manual - Page 32
    printers attached to the Model PS104/PS105/PS110 print server. Installing and Setting Up FirstGear-User Installation To install the NETGEAR print server software for user installation: 1. Turn on the power to your PC. 2. Insert the NETGEAR Resource CD-ROM. The NETGEAR window briefly opens, and the
  • Netgear PS104 | PS110 Reference Manual - Page 33
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 3. Click on Next. Another FirstGear window, as illustrated in Figure 3-2, opens. Figure 3-2. User Installation Option Window Microsoft Windows 95 and Windows 98 Printing 3-3
  • Netgear PS104 | PS110 Reference Manual - Page 34
    the Model PS104/PS105/PS110 Print Server 4. Choose "User PC Installation" and click on Next. The NETGEAR Print Server Software Installation window, as illustrated in Figure 3-3, opens. Figure 3-3. NETGEAR Print Server Software Installation Window 3-4 Microsoft Windows 95 and Windows 98 Printing
  • Netgear PS104 | PS110 Reference Manual - Page 35
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 5. Click on Next. The Choose Destination Location window, as illustrated in Figure 3-4, opens. Figure 3-4. Choose Destination Location Window Microsoft Windows 95 and Windows 98 Printing 3-5
  • Netgear PS104 | PS110 Reference Manual - Page 36
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 6. Click on Next. The Select Program Folder window, as illustrated in Figure 3-5, opens. Figure 3-5. Select Program Folder Window 3-6 Microsoft Windows 95 and Windows 98 Printing
  • Netgear PS104 | PS110 Reference Manual - Page 37
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 7. Type Firstgear for Print Server in the Program The Setup Complete window, as illustrated in Figure 3-6, opens. Figure 3-6. Setup Complete Window 9. Click on Finish. The FirstGear Print Server Program is now installed on
  • Netgear PS104 | PS110 Reference Manual - Page 38
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Setting Up Your PC to Recognize the Print Server You must set up each PC that will print to the print server. Before proceeding, verify that: • The print cable is connected to the printer port. • The AC adapter is plugged into
  • Netgear PS104 | PS110 Reference Manual - Page 39
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The Firstgear for Print Server window, as illustrated in Figure 3-8, opens. Figure 3-8. Setup Icon 2. Double-click on Setup in the Firstgear for Print Server window. The Setup window opens, as illustrated in Figure 3-9. Figure
  • Netgear PS104 | PS110 Reference Manual - Page 40
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 5. Click on OK. The Printer Select window, as illustrated in Figure 3-10, opens. The Printer Select window will stay in the background while you work through subsequent setup windows because you will use this window to complete
  • Netgear PS104 | PS110 Reference Manual - Page 41
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 6. Click on the printer port you want to use with the print server, and click on Add. The ADDPORT window for Epson print connection, as illustrated in Figure 3-11, opens. Figure 3-11. ADDPORT Window (Epson Connection) 7. Click
  • Netgear PS104 | PS110 Reference Manual - Page 42
    Installation and Reference for the Model PS104/PS105/PS110 Print Server c. Select Queue Setup, and click on Use Print Manager for this port. d. Click on OK to exit the Queue Setup window. The ADDPORT window, as illustrated in Figure 3-13, opens. This window informs you that you have successfully
  • Netgear PS104 | PS110 Reference Manual - Page 43
    PS104/PS105/PS110 Print Server 9. Click on Next after clicking on the names of the manufacturer and printer model you are adding. If your printer is not listed, click on Have Disk and insert the driver disk that you received from the printer manufacturer. Install the driver, proceeding as instructed
  • Netgear PS104 | PS110 Reference Manual - Page 44
    Model PS104/PS105/PS110 Print Server 10. If you have already installed the printer driver, select Keep existing driver (recommended), and click on Next. If you have not installed the driver, do so now as prompted by the screen, as illustrated in Figure 3-15. The Add Printer Wizard window for naming
  • Netgear PS104 | PS110 Reference Manual - Page 45
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 11. Type a name for the printer (if you want it to have a unique name) and decide if you want this printer to be your default printer; then click on Next. The Add Printer Wizard window for printing a test page, as illustrated in
  • Netgear PS104 | PS110 Reference Manual - Page 46
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 12. Select Yes when asked to print a test page, and click on Finish. The Add Printer window closes and the Printer Select window, as illustrated in Figure 3-18, comes back into view. Figure 3-18. Add Port Window (Setup Complete
  • Netgear PS104 | PS110 Reference Manual - Page 47
    attached to the Model PS104/PS105/PS110 print server. To install the NETGEAR print server software for admin installation: 1. Turn on the power to your PC. 2. Insert the NETGEAR Resource CD-ROM. The NETGEAR window briefly opens, and the FirstGear Introductory window, as illustrated in Figure
  • Netgear PS104 | PS110 Reference Manual - Page 48
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 3. Click on Next. Another FirstGear window, as illustrated in Figure 3-20, opens. Figure 3-20. "Admin Installation" Option Window 3-18 Microsoft Windows 95 and Windows 98 Printing
  • Netgear PS104 | PS110 Reference Manual - Page 49
    Model PS104/PS105/PS110 Print Server 4. Choose "Admin PC Installation" and click on Next. The NETGEAR Print Server Software Installation window, as illustrated in Figure 3-21, opens. Figure 3-21. NETGEAR Print Server Software Installation Window Microsoft Windows 95 and Windows 98 Printing 3-19
  • Netgear PS104 | PS110 Reference Manual - Page 50
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 5. Click on Next. The Choose Destination Location window, as illustrated in Figure 3-22, opens. Figure 3-22. Choose Destination Location Window 3-20 Microsoft Windows 95 and Windows 98 Printing
  • Netgear PS104 | PS110 Reference Manual - Page 51
    for the Model PS104/PS105/PS110 Print Server 6. Click on Next to install the NETGEAR print server program in the Program Files folder. If you want to have the program installed elsewhere, click on Browse to find an alternate location for the software. The Select Program Folder window, as illustrated
  • Netgear PS104 | PS110 Reference Manual - Page 52
    and Reference for the Model PS104/PS105/PS110 Print Server 9. Click on Next. The software is copied to the program folder you requested in step 7. A window opens, asking you if you want to install Adobe Acrobat (a software program that will allow you to view the manual on line). 10. Click on
  • Netgear PS104 | PS110 Reference Manual - Page 53
    Disk Window 2. Refer to "Installing and Setting Up FirstGear-User Installation" on page 3-2 or "Installing and Setting Up FirstGear-Admin Installation on page 3-17 to continue with the installation and setup process. For more information about the advanced setup features for the NETGEAR print server
  • Netgear PS104 | PS110 Reference Manual - Page 54
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Setting up the Print Server Using NetBEUI and TCP/IP Configuring the Print Server Using NetBEUI No additional print server configuration is necessary after you have followed the steps outlined in "Setting Up Your PC to Recognize
  • Netgear PS104 | PS110 Reference Manual - Page 55
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The Firstgear for Print Server window, as illustrated in Figure 3-27, opens. Figure 3-27. Firstgear for Print Server Window Microsoft Windows 95 and Windows 98 Printing 3-25
  • Netgear PS104 | PS110 Reference Manual - Page 56
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 2. Double-click on the NETGEAR Print Server Administration icon. The NETGEAR Print Server Administration Program window, as illustrated in Figure 3-28, opens. Figure 3-28. NETGEAR Print Server Administration Program Window 3-
  • Netgear PS104 | PS110 Reference Manual - Page 57
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 3. Click on the Advanced button, as illustrated in Figure 3-28. The TCP/IP menu opens, as illustrated in Figure 3-29. Figure 3-29. TCP/IP Menu 4. Click on the TCP/IP menu tab, which is located at the top of the window, as
  • Netgear PS104 | PS110 Reference Manual - Page 58
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 5. Select Enable or Disable to enable or disable DHCP. If DHCP is enabled, the print server can be set up to obtain its IP address from a DHCP (Dynamic Host Configuration Protocol) server or can be manually assigned an IP
  • Netgear PS104 | PS110 Reference Manual - Page 59
    PS104/PS105/PS110 print server in a Microsoft Windows NT networking environment. To correctly configure your hardware and software for the Microsoft Windows platform, you must: • Install FirstGear for Print Server software. • Run Setup • Configure the user PC to print to the NETGEAR print server
  • Netgear PS104 | PS110 Reference Manual - Page 60
    Reference for the Model PS104/PS105/PS110 Print Server Choose this option, User Installation, to be able to print to the print server. Note: Before proceeding with these instructions, be sure to assign a name to your workgroup on your PC. Installation and setup of the NETGEAR software is required on
  • Netgear PS104 | PS110 Reference Manual - Page 61
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 3. Click on Next. Another FirstGear window, as illustrated in Figure 4-2, opens. Figure 4-2. User PC Installation Option Window Microsoft Windows NT Printing 4-3
  • Netgear PS104 | PS110 Reference Manual - Page 62
    Reference for the Model PS104/PS105/PS110 Print Server 4. Choose "User PC Installation" and click on Next. The NETGEAR Print Server Software Installation window, as illustrated in Figure 4-3, opens. Figure 4-3. NETGEAR Print Server Software Installation Window 4-4 Microsoft Windows NT Printing
  • Netgear PS104 | PS110 Reference Manual - Page 63
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 5. Click on Next. The Choose Destination Location window, as illustrated in Figure 4-4, opens. Figure 4-4. Choose Destination Location Window Microsoft Windows NT Printing 4-5
  • Netgear PS104 | PS110 Reference Manual - Page 64
    for the Model PS104/PS105/PS110 Print Server 6. Click on Next to install the NETGEAR Print Server program in the Program Files folder. If you want to have the program placed elsewhere, click on Browse to find an alternate location for the software. The Select Program Folder window, as illustrated in
  • Netgear PS104 | PS110 Reference Manual - Page 65
    and Reference for the Model PS104/PS105/PS110 Print Server 8. Click on Next. The Setup Complete window, as illustrated in Figure 4-6, opens. Figure 4-6. Setup Complete Window 9. Click on Finish. The FirstGear Print Server Program is now installed on your PC. You must now set up your PC to
  • Netgear PS104 | PS110 Reference Manual - Page 66
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Setting Up Your PC to Recognize the Print Server You must set up each PC that will print to the print server. Before proceeding, verify that: • The print cable is connected to the printer port. • The AC adapter is plugged into
  • Netgear PS104 | PS110 Reference Manual - Page 67
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The Firstgear for Print Server window, as illustrated in Figure 4-8, opens. Figure 4-8. Firstgear for Print Server Setup Icon 2. Click on Setup. The Setup window, as illustrated in Figure 4-9, opens. Figure 4-9. Setup Window
  • Netgear PS104 | PS110 Reference Manual - Page 68
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 5. Click on OK. The Printer Select window, as illustrated in Figure 4-10, opens. The Printer Select window will stay in the background while you work through subsequent setup windows because you will use this window to complete
  • Netgear PS104 | PS110 Reference Manual - Page 69
    Reference for the Model PS104/PS105/PS110 Print Server 7. Click on No if you do not have an Epson Stylus Color printer attached to the port, and continue on to Step 8. Or If you do have an Epson Stylus Color printer (or plan to install one) you must now disable the Epson printer. To disable
  • Netgear PS104 | PS110 Reference Manual - Page 70
    Installation and Reference for the Model PS104/PS105/PS110 Print Server d. Click on OK to exit the Queue Setup window. The ADDPORT window, as illustrated in Figure 4-13, opens. This window informs you that you have successfully added the port. Figure 4-13. Add Port Window (Added port successfully)
  • Netgear PS104 | PS110 Reference Manual - Page 71
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 9. Select the port you added in the previous step. Do not click on Add Port. 10. Click on Next. The Add Printer Wizard window, as illustrated in Figure 4-15, opens. Figure 4-15. Add Printer Wizard Window (Manufacturer and Model
  • Netgear PS104 | PS110 Reference Manual - Page 72
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 11. Click on Next after clicking on the names of the manufacturer and printer model you are adding in the Add Printer Wizard window. If your printer is not listed, click on Have Disk and insert the driver disk that you received
  • Netgear PS104 | PS110 Reference Manual - Page 73
    share or not share the print server with other users in the network. If you do want to share the print server, you must click on all of the operating systems that will be sharing the print server. Figure 4-17. Add Printer Wizard Window (Sharing Ports Screen) Microsoft Windows NT Printing 4-15
  • Netgear PS104 | PS110 Reference Manual - Page 74
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 13. Click on Next. Another Add Printer Wizard window, as illustrated in Figure 4-18, opens. Figure 4-18. Add Printer Wizard Window (Print Test Page) 4-16 Microsoft Windows NT Printing
  • Netgear PS104 | PS110 Reference Manual - Page 75
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 14. Click on Finish. The Add Printer Wizard window closes and the Printer Select window, as illustrated in Figure 4-19, comes back into view. Figure 4-19. Printer Select Window (End Setup) 15. Click on End. You are now ready to
  • Netgear PS104 | PS110 Reference Manual - Page 76
    , print, and manage the NETGEAR print server. Note: It is necessary to install the FirstGear software on every PC in the network that will use the printers attached to the Model PS104/PS105/PS110 print server. 1. Turn on the power to your PC. 2. Insert the NETGEAR Resource CD-ROM. The NETGEAR window
  • Netgear PS104 | PS110 Reference Manual - Page 77
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 3. Click on Next. Another FirstGear window, as illustrated in Figure 4-21, opens. Figure 4-21. Admin Installation Option Window Microsoft Windows NT Printing 4-19
  • Netgear PS104 | PS110 Reference Manual - Page 78
    for the Model PS104/PS105/PS110 Print Server 4. Select "Admin PC Installation" and click on Next. The NETGEAR Print Server Software Installation window, as illustrated in Figure 4-22, opens. Figure 4-22. NETGEAR Print Server Software Installation Window 4-20 Microsoft Windows NT Printing
  • Netgear PS104 | PS110 Reference Manual - Page 79
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 5. Click on Next. The Choose Destination Location window, as illustrated in Figure 4-23, opens. Figure 4-23. Choose Destination Location Window Microsoft Windows NT Printing 4-21
  • Netgear PS104 | PS110 Reference Manual - Page 80
    and Reference for the Model PS104/PS105/PS110 Print Server 6. Click on Next to install the NETGEAR Print Server program in the Program Files folder. If you want to have the program placed elsewhere, click on Browse to find an alternate location for the software. The Select Program Folder, as
  • Netgear PS104 | PS110 Reference Manual - Page 81
    and Reference for the Model PS104/PS105/PS110 Print Server 9. Click on Next. The software will be copied to the program folder you requested in step 7. A window opens, asking you if you want to install Adobe Acrobat (a software program that will allow you to view the manual on line). 10. Click on
  • Netgear PS104 | PS110 Reference Manual - Page 82
    high-density disk. Figure 4-26. Install From Disk Window 2. Refer to "Installing and Setting Up FirstGear-User Installation" on page 4-2 to continue with the installation and setup process. For information about the advanced setup procedures for the NETGEAR print server, refer to Chapter 7, "Using
  • Netgear PS104 | PS110 Reference Manual - Page 83
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Setting up the Print Server Using NetBEUI and TCP/IP Configuring the Print Server Using NetBEUI No additional print server configuration is necessary after you have followed the steps outlined in "Setting Up Your PC to Recognize
  • Netgear PS104 | PS110 Reference Manual - Page 84
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The Firstgear for Print Server window, as illustrated in Figure 4-28, opens. Figure 4-28. Firstgear for Print Server Window 4-26 Microsoft Windows NT Printing
  • Netgear PS104 | PS110 Reference Manual - Page 85
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 2. Double-click on the NETGEAR Print Server Administration icon. The NETGEAR Print Server Administration Program window, as illustrated in Figure 4-29, opens. Figure 4-29. NETGEAR Print Server Administration Program Window
  • Netgear PS104 | PS110 Reference Manual - Page 86
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 3. Click on the Advanced button, as illustrated in Figure 4-29. The TCP/IP menu opens, as illustrated in Figure 4-30. Figure 4-30. TCP/IP Menu 4. Click on the TCP/IP menu tab, which is located at the top of the window, as
  • Netgear PS104 | PS110 Reference Manual - Page 87
    inadvertently disabled the DHCP protocol and/or assigned a wrong subnet IP address. Proceed to Appendix E, "IP Setup," for more information to help you force a static IP address to the print server. Setting Up Spooled LPR Printing with Windows NT 3.51 Before starting the PC configuration, you must
  • Netgear PS104 | PS110 Reference Manual - Page 88
    Reference for the Model PS104/PS105/PS110 Print Server 2. Click on the Add Software button. The Network Software dialog box opens. 3. Select TCP/IP Protocol And Related Components in the Network Software dialog box, and then click on Continue. The Windows NT TCP/IP Installation Options dialog box
  • Netgear PS104 | PS110 Reference Manual - Page 89
    of Printer On That Machine Description Enter the IP address of your print server. Enter the appropriate logical printer number (for example, L1). Use only logical printers when implementing the LPR printer port in the Windows NT system. If you are using the Model PS104 and Model PS105, L1 and L2
  • Netgear PS104 | PS110 Reference Manual - Page 90
    using the Model PS104 or PS105 Print Server, all three logical ports are mapped to the same PRINTER port. If you are using the Model PS110 Print Server, the factory default is L1 = P1 and L2 = P2. 7. Click on OK. 8. Click on Close when the Printer Ports window reopens, and then install your printer
  • Netgear PS104 | PS110 Reference Manual - Page 91
    This chapter describes how to configure and use the NETGEAR Model PS104 Print Server, Model PS105 Print Server, and Model PS110 Print Server in the Novell NetWare environment. Configuration Overview This section describes the requirements and outlines the PSERVER or RPRINTER mode configuration
  • Netgear PS104 | PS110 Reference Manual - Page 92
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The following two operating modes are possible in bindery (NetWare 3.x), NDS network environment (NetWare 4.x), or NDPS (NetWare 5.x): • PSERVER mode PSERVER mode is faster and uses
  • Netgear PS104 | PS110 Reference Manual - Page 93
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The following sections describe how to determine a device name for your print server and set up the following three printing components on a Novell NetWare server: • Print queue • Print server • Print Configuring Your Print
  • Netgear PS104 | PS110 Reference Manual - Page 94
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Setting PSERVER Mode in NetWare 3.x (Bindery Mode) To set up the NetWare file server to connect to the Model PS104/PS105/PS110 print server in the NetWare PSERVER mode, first designate a NetWare file server that your print
  • Netgear PS104 | PS110 Reference Manual - Page 95
    Installation and Reference for the Model PS104/PS105/PS110 Print Server d. Select the printer number on the Configured Printers submenu, using the printer number mapping as shown in Table 5-1. For more information about logical ports, refer to "Using Logical Ports" on page 5-22. Table 5-1.
  • Netgear PS104 | PS110 Reference Manual - Page 96
    Installation and Reference for the Model PS104/PS105/PS110 Print Server f. Press [Esc] to return to the Defined Printers window. g. Repeat steps b PS is the Operation Mode. PS must be the operation mode for the print server to operate in PSERVER mode. If the operation mode is RP, the print server
  • Netgear PS104 | PS110 Reference Manual - Page 97
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Setting RPRINTER Mode in NetWare 3.x (Bindery Mode) To set up the NetWare file server to connect to the Model PS104/PS105/PS110 print server in the NetWare RPRINTER mode, first designate a NetWare file server that your print
  • Netgear PS104 | PS110 Reference Manual - Page 98
    Installation and Reference for the Model PS104/PS105/PS110 Print Server To associate a NetWare printer object with each printer port of the print server: a. Select the print server you added in step 3. b. Select Print Server Configuration. c. Select Printer Configuration. d. Select the entry with
  • Netgear PS104 | PS110 Reference Manual - Page 99
    Installation and Reference for the Model PS104/PS105/PS110 Print Server j. Repeat steps d through f for each printer port on the print server. k. Press [Esc] to return to the Print Server Configuration menu. 5. Associate printers with print queues. To associate print queues with the printer(s)
  • Netgear PS104 | PS110 Reference Manual - Page 100
    Installation and Reference for the Model PS104/PS105/PS110 Print Server g. Press [Esc] to return to the Select Configuration Item window. h. Select System Configuration if any change to the print server is necessary. If a change is necessary, select Device Name, change it to the new print server
  • Netgear PS104 | PS110 Reference Manual - Page 101
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Using Your Print Server in a NetWare 4.x Network In NetWare 3.x, all user-related information is stored in a database called the Bindery. NetWare server administration programs such as SYSCON and PCONSOLE modify information in
  • Netgear PS104 | PS110 Reference Manual - Page 102
    in to the NDS file server when you have Client32 installed. 2. Configure the file server using Quick Setup. To configure the file server using Quick Setup: a. Select Quick Setup from the Available Options window. b. Type the predetermined print server name in the Print Server field. This name is the
  • Netgear PS104 | PS110 Reference Manual - Page 103
    Installation and Reference for the Model PS104/PS105/PS110 Print Server g. Press [Esc] to exit PCONSOLE. 3. Configure your print server. To configure your print server: a. Execute the PSCONFIG program while logged on to the file server. b. Select the NETGEAR print server that you want to configure.
  • Netgear PS104 | PS110 Reference Manual - Page 104
    will be used later to configure the NETGEAR print server. To configure the file server to use the Model PS104/PS105/PS110 print server in PSERVER mode: 1. Execute the PCONSOLE program from the System volume of the file server. The Available Options window opens. Make sure that the following five
  • Netgear PS104 | PS110 Reference Manual - Page 105
    automatically assigned by Quick Setup starting from printer number 0. It can be modified by selecting Printers from the Available Options main menu, selecting the designated printer, and changing the Printer Number in the Printer Configuration window. The print server port to printer number mapping
  • Netgear PS104 | PS110 Reference Manual - Page 106
    are in the window: • Print Queues • Printers • Print Servers • Quick Setup • Change Context If you do not see these five menu selections, you are not running Client32. You will have to exit PCONSOLE, log out, and log in to the NDS file server when you have Client32 installed. 2. Configure the file
  • Netgear PS104 | PS110 Reference Manual - Page 107
    Reference for the Model PS104/PS105/PS110 Print Server b. Type the predetermined print server name in the Print Server field. This name is not the one for the NETGEAR print server. It is the print server you will set up on the NetWare file server. At the end of the installation process, you will
  • Netgear PS104 | PS110 Reference Manual - Page 108
    Installation and Reference for the Model PS104/PS105/PS110 Print Server g. Press [Esc] to return to the Select Configuration Item window. h. Select System Configuration if any changes to the print server name are necessary. To change the print server name, Select Device Name, change the print server
  • Netgear PS104 | PS110 Reference Manual - Page 109
    Tools from the NWADMN32's menu bar. c. Select Print Services Quick Setup (Non-NDPS). d. Type your print server name in the Print Server Name field. (NETGEAR recommends that you use the default name of the NETGEAR Print Server, which is NETGEAR PRINT SERVER). e. Type the printer name you want in the
  • Netgear PS104 | PS110 Reference Manual - Page 110
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 4. Launch the Print Server Administrator Program. To launch the Print Server Administrator Program: a. Select "Netgear Print Server Administration" from the FirstGear for Print Server icon on your desktop. b. Select Print Server
  • Netgear PS104 | PS110 Reference Manual - Page 111
    Device from the Available Options window. Your print server is now ready to service more than one Bindery file server. Attaching to More Than One NetWare Print Server If your print server is configured as a NetWare remote printer and you want each port of your print server to attach to a different
  • Netgear PS104 | PS110 Reference Manual - Page 112
    (Line Feed, Carriage Return) pairs. The Model PS104 Print Server, with one parallel port, supports three logical printers. The Model PS110 Print Server, with two parallel ports, supports eight logical printers. Configuring Logical Printers on the Print Server To define pre-string, post-string, and
  • Netgear PS104 | PS110 Reference Manual - Page 113
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 3. Select Logical Printer Configuration, and then set the items listed in Table 5-3 in each of the appropriate entry fields. Table 5-3. Logical Printer Configuration Entries Entry Field Definition Physical Port Select the
  • Netgear PS104 | PS110 Reference Manual - Page 114
  • Netgear PS104 | PS110 Reference Manual - Page 115
    both PCs and UNIX systems NETGEAR highly recommends that you configure the print server from a Windows PC as outlined in the instructions in Chapter 7, "Using Advanced Management Tools." The administration program software assigns an IP address to the print server by using the NetBEUI or the
  • Netgear PS104 | PS110 Reference Manual - Page 116
    Installation and Reference for the Model PS104/PS105/PS110 Print Server • Includes only UNIX systems or if you have PCs without Windows on your network You must configure both your print server and all your PC systems with the instructions provided in this chapter. Before you can configure the print
  • Netgear PS104 | PS110 Reference Manual - Page 117
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Temporary IP Address Resolution If the IP address is left at 0.0.0.0 (the default value), a temporary IP address is assigned when the print server is powered on. DHCP, BootP, and RARP are attempted in sequence for finding an
  • Netgear PS104 | PS110 Reference Manual - Page 118
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 4. Add to the Boot Table in the /etc/booptab file: NAME:ht=ether:vm=rfc1024::ha=PA:ip=IP:sm=SM:gw=GW Use these definitions for entering the information: • NAME is the name of your print server. • PA is the physical address of
  • Netgear PS104 | PS110 Reference Manual - Page 119
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 3. Add the print server to the /etc/hosts file by adding to the file: IP_Address NAME # Comment Use these definitions for entering the information: • IP_Address is the IP address of your print server. • NAME is the name of your
  • Netgear PS104 | PS110 Reference Manual - Page 120
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Assigning an IP Address to the Print Server Using ARP To assign an IP address using the Address Resolution Protocol (ARP): 1. Determine the physical address and the device name of the print server. The factory default name and
  • Netgear PS104 | PS110 Reference Manual - Page 121
    responses to each command when you use FTP to connect to the print server. Example instructions are: 1. Connect to the print server by entering the command: ftp NAME or ftp IP_Address You can connect using a name instead of an IP address only if your system has been configured to recognize the name
  • Netgear PS104 | PS110 Reference Manual - Page 122
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 7. Copy the CONFIG file back to the print server and then reset the device by using the commands: ftp NAME ftp>put CONFIG ftp>get RESET 8. Quit by using the command: ftp>quit List of FTP Files and Commands Supported by the
  • Netgear PS104 | PS110 Reference Manual - Page 123
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table 6-2. FTP Commands (continued) Command Function put CONFIG Copies the CONFIG file to the print server, overwriting the existing CONFIG file. After using this command to write a new configuration file, use the get
  • Netgear PS104 | PS110 Reference Manual - Page 124
    Installation and Reference for the Model PS104/PS105/PS110 Print Server LPD Configuration and Printing LPD is a built-in printing protocol for most UNIX systems including BSD type UNIX. It is also supported in Windows NT 3.5 or later. The following sections provide information about configuring
  • Netgear PS104 | PS110 Reference Manual - Page 125
    one of the entries used in Name of queue to add. • file_name is the file you want to print. Configuring LPD on System V Before beginning LPD Setup, make sure that an IP address has been assigned to your print server and that the following statements apply: • The remote host name is the name of the
  • Netgear PS104 | PS110 Reference Manual - Page 126
    LPD on BSD Make sure that an IP address has been assigned to the print server and the following statements apply: • The remote host name is the name of the print server. • The remote printer name is the logical printer (L1 to L3 or L1 to L8). • You identify the service type as BSD if your UNIX
  • Netgear PS104 | PS110 Reference Manual - Page 127
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table 6-4 shows sample commands when using LPD. The definitions used in the sample commands are: • printer_name is the print queue serviced by the logical printer on the print server. • Spooler_dir is the name of the directory
  • Netgear PS104 | PS110 Reference Manual - Page 128
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Printing Using FTP Using FTP to print lets you send print jobs to the printers directly. Because there is no spooling, if the printer is not ready, the print job is terminated immediately. The advantage of FTP is that no host
  • Netgear PS104 | PS110 Reference Manual - Page 129
    programs described in this chapter are: • NETGEAR Print Server Administration Program This software program is a print server administration program based on Windows 95, Windows 98, or Windows NT. It runs on any of the three protocols that the print server supports. • PSCONFIG This program is an MS
  • Netgear PS104 | PS110 Reference Manual - Page 130
    program. As illustrated in Figure 7-1, the main screen of the FirstGear print server setup utility opens and searches the network for NETGEAR print servers. Figure 7-1. NETGEAR Print Server Administration Program All active NETGEAR print servers are listed on the screen as shown. If there is any
  • Netgear PS104 | PS110 Reference Manual - Page 131
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 2. Click on the Quick button to open the FirstGear Setup Utility Quick Setup Screen as shown in Figure 7-2. Choosing the Quick button performs a quick configuration of the print server in a Microsoft network running the NetBEUI
  • Netgear PS104 | PS110 Reference Manual - Page 132
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Advanced Print Server Configuration From the main menu, click on the Advanced button to use the advanced configuration procedure. The Advanced Print Server Configuration screen opens. The Advanced Print Server Configuration
  • Netgear PS104 | PS110 Reference Manual - Page 133
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Any configuration change is lost unless you click on the Save to Device button at the bottom of the field window to send the configuration to the print server. When moving into a new field screen, all settings in the previous
  • Netgear PS104 | PS110 Reference Manual - Page 134
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table 7-2. System Menu Tab Fields Field Description Device Name Choose a descriptive name for the router for identification purposes (for example, EngPrsv). This name is used in all protocols to identify the specific print
  • Netgear PS104 | PS110 Reference Manual - Page 135
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Figure 7-4. NetWare PServer Tab Window Table 7-3. NetWare PSERVER Menu Tab Fields Field Description Print Server Mode Indicates if the print server is in NetWare PSERVER mode. If this button is not selected, you will not
  • Netgear PS104 | PS110 Reference Manual - Page 136
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table 7-3. NetWare PSERVER Menu Tab Fields (continued) Field Master file server (Binary Mode Only) Polling Interval Job Notification by Connection ID Frame Type Change Password Description When operating in Bindery mode, the
  • Netgear PS104 | PS110 Reference Manual - Page 137
    mode. When selected, the print server operates in RPRINTER mode. If this button is not selected, you will not be able to modify the following RPRINTER parameters. Enter the name of the NetWare print server to service the PRINTER 1 port of the print server. Using Advanced Management Tools 7-9
  • Netgear PS104 | PS110 Reference Manual - Page 138
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table 7-4. NetWare RPrinter Menu Tab Fields (continued) Field Novell Printer Server for P2 Frame Type Description Enter the name of the NetWare print server to service the PRINTER 2 port of the print server. If there is no
  • Netgear PS104 | PS110 Reference Manual - Page 139
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table 7-5. TCP/IP Menu Tab Fields Field DHCP IP Address Subnet Mask Gateway Address Description This field allows you to enable or disable the print server's ability to get its IP address from a DHCP (Dynamic Host
  • Netgear PS104 | PS110 Reference Manual - Page 140
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Logical Port Menu Tab Figure 7-7 shows the Logical Port menu tab, and Table 7-6 lists the fields in the menu tab, describes their functions, and explains how to provide information in each field. Figure 7-7. Logical Port Menu
  • Netgear PS104 | PS110 Reference Manual - Page 141
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The fields of the Logical Port menu tab, describes the functions, and explains how to provide information in each field. Table 7-6. Logical Port Menu Tab Fields Field Description Current Selected Selects the logical port
  • Netgear PS104 | PS110 Reference Manual - Page 142
    printout includes print server status information, which is useful when troubleshooting any printing problems. If you suspect that the printer status is not properly updated on the screen, click this button to generate packets to collect updated printer information. Close this pop-up window. 7-14
  • Netgear PS104 | PS110 Reference Manual - Page 143
    the Model PS104/PS105/PS110 Print Server Configuring Using PSCONFIG This section of the manual describes the MS-DOS-based print server configuration program, PSCONFIG. Prior to executing PSCONFIG, you must have the following software or drivers installed in the system: • NetWare Link Support Layer
  • Netgear PS104 | PS110 Reference Manual - Page 144
    a test page to the printer that is connected to one of the print server ports. The Report printout includes print server status information, which is useful in troubleshooting any printing problem. Changing Configuration Menu Options The selections available under the Change Configuration menu
  • Netgear PS104 | PS110 Reference Manual - Page 145
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The print server supports multiple protocols but only one name is used for the print server, no matter what protocol is used. As a result, whatever name chosen affects the operation of the print server under different protocols
  • Netgear PS104 | PS110 Reference Manual - Page 146
    to service the PRINTER 2 port of the print server (valid only when operating in RPRINTER mode). TCP/IP Configuration Table 7-11 lists the fields for TCP/IP configuration, describes their functions, and explains how to provide information in each field. For additional information about IP addressing
  • Netgear PS104 | PS110 Reference Manual - Page 147
    Installation and Reference for the Model PS104/PS105/PS110 Print Server NetBEUI Configuration Table 7-12 lists the fields for NetBEUI configuration, describes their functions, and explains how to provide information in each field. Table 7-12. NetBEUI
  • Netgear PS104 | PS110 Reference Manual - Page 148
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Logical Printer Configuration For the print server with one printer port, there are three logical printers. For print server models with two printer ports, there are eight logical printers. You can define how each one of the
  • Netgear PS104 | PS110 Reference Manual - Page 149
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Configuring Using QUICKSET This section describes how to use the QUICKSET program to configure the Novell server and the print server. Use QUICKSET /? to display the help screen. You must have the following software and drivers
  • Netgear PS104 | PS110 Reference Manual - Page 150
    Installation and Reference for the Model PS104/PS105/PS110 Print Server In the Novell PSERVER mode, use these QUICKSET commands: • For the Binary-based file server name of the print server. Do not change it unless necessary. W and X are the names of the queues to be serviced by parallel ports 1 to
  • Netgear PS104 | PS110 Reference Manual - Page 151
    Installation and Reference for the Model PS104/PS105/PS110 Print Server NetWare Remote ports on the printer to service the same NetWare print server. If you want to configure the printer ports to service different NetWare print servers, refer to "Attaching to More Than One NetWare Print Server
  • Netgear PS104 | PS110 Reference Manual - Page 152
    name of the NetWare print server created on the file server to which the NETGEAR print server (in RPRINTER mode) will connect. New name of the print server. Do not change it unless necessary. W, X F W and X are the names of the queues to be serviced by parallel ports 1 to 2, respectively. If you
  • Netgear PS104 | PS110 Reference Manual - Page 153
    encoded Interface Model PS104 Print Server: Four 10BASE-T network ports (RJ-45) Model PS105 Print Server: Model PS110 Print Server: Four 10BASE-T network ports (RJ-45) and one BNC network port. One 10BASE-T/100BASE-TX network port (RJ-45) Power Specifications for the Power Adapter Input
  • Netgear PS104 | PS110 Reference Manual - Page 154
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Power Specifications for the Print Server Power consumption: 7 W maximum Input voltage: 12 V DC at 0.58 Amps, maximum Physical Specifications Width: 7.4 in. (18.9 cm) Height: 1.2 in. (2.1 cm) Depth: Weight: 4.8 in. (
  • Netgear PS104 | PS110 Reference Manual - Page 155
    Appendix B Understanding IP Addresses This appendix provides information about understanding IP addresses, which you must assign to the NETGEAR Model PS104/PS105/PS110 print server when operating in a TCP/IP environment. IP Addresses and the Internet Because TCP/IP networks are interconnected
  • Netgear PS104 | PS110 Reference Manual - Page 156
    Installation and Reference for the Model PS104/PS105/PS110 Print Server There are five standard classes of IP addresses. These address classes have different ways of determining the network and host sections of the address, allowing for different numbers of hosts on a network. Each address type
  • Netgear PS104 | PS110 Reference Manual - Page 157
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Class E addresses are for experimental use. This addressing structure allows IP to uniquely identify each physical network and each node on each physical network. For each unique value of the network portion of the address, the
  • Netgear PS104 | PS110 Reference Manual - Page 158
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Subnet Addressing By looking at the addressing structures, you can see that even with a Class C address there are a large number of hosts per network. Such a structure is an inefficient use of addresses if each end of a routed
  • Netgear PS104 | PS110 Reference Manual - Page 159
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Although the preceding example uses the entire third octet for a subnet address, note that you are not restricted to octet boundaries in 255.0.0.0 255.255.0.0 255.255.255.0 Masklength /8 /16 /24 Understanding IP Addresses B-5
  • Netgear PS104 | PS110 Reference Manual - Page 160
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table B-2. Netmask Formats (continued) 255.255.255.128 /25 255.255.255.192 /26 255.255.255.224 /27 255.255.255.240 /28 255.
  • Netgear PS104 | PS110 Reference Manual - Page 161
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Address Resolution Protocol An IP address alone cannot be used to deliver data from one device to another on a LAN. In order for data to be sent from one device on the LAN to another, you must convert the IP address of the
  • Netgear PS104 | PS110 Reference Manual - Page 162
  • Netgear PS104 | PS110 Reference Manual - Page 163
    CONFIG files are stored in the flash EEPROM of the NETGEAR Model PS104/PS105/PS110 print server and used for configuring the device using the FTP IP Protocol (0012 TCPIP_P) IP Address (4000 IP_ADDR) Device IP Address (4001 GATEWAY) Definition The default name of the print server is PSxxxxxx (PS
  • Netgear PS104 | PS110 Reference Manual - Page 164
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Table Address is 0.0.0.0, leave the Subnet Mask at 0.0.0.0. If you have a router, enter the Subnet mask for the segment to which the print server is attached. Sets how long the print server should wait before retrying a TCP/IP
  • Netgear PS104 | PS110 Reference Manual - Page 165
    Installation and Reference for the Model PS104/PS105/PS110 Print Server The Model PS104 Print Server has one parallel port and supports three logical printers. The Model PS110 Print Server has two parallel ports and supports eight logical printers. You cannot change the names. Each logical printer
  • Netgear PS104 | PS110 Reference Manual - Page 166
  • Netgear PS104 | PS110 Reference Manual - Page 167
    an overview of using the Print Server with NDPS (Novell Distributed Printing Services) under Novel NetWare 5.0. Overview The NETGEAR print server must be configured as a valid device on your TCP/IP network. To use NDPS (Novell Distributed Printing Services), the Novell server must be running Novell
  • Netgear PS104 | PS110 Reference Manual - Page 168
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 4. Select NDPS Manager as the object to create. The Create NDPS Manager Object window, as illustrated in Figure D-1, opens. Figure D-1. Create NDPS Manager Object Window 5. Type a name in the NDPS Manager Name. 6. Browse the
  • Netgear PS104 | PS110 Reference Manual - Page 169
    Installation and Reference for the Model PS104/PS110 Print Server Creating an NDPS Printer Agent To create Public Access Printers using the NDPS Manager Object in NetWare Administrator, follow these instructions. You will need to repeat the procedure for any other ports on the print server or for
  • Netgear PS104 | PS110 Reference Manual - Page 170
    Installation and Reference for the Model PS104/PS105/PS110 Print Server 9. In the Host Address IP field, enter the IP address previously assigned to the Print Server device, as illustrated in Figure D-3. Figure D-3. Configure Port Handler Window 10. In the Printer Name field, enter the Logical Port
  • Netgear PS104 | PS110 Reference Manual - Page 171
    and Reference for the Model PS104/PS110 Print Server Workstation Configuration Before installation and configuration of the Public Access Printers on your workstation, ensure that the following statements apply: • Novel IntranetWare Client v2.2 (or later) is installed on your PC. • You have
  • Netgear PS104 | PS110 Reference Manual - Page 172
  • Netgear PS104 | PS110 Reference Manual - Page 173
    Appendix E IP Setup This appendix provides a brief overview of IP addressing. Overview This appendix is intended only when the user has inadvertently disabled the DHCP protocol and/or assigned a wrong subnet IP address. Refer to Table E-1 to assign a static IP address. Table E-1 describes each
  • Netgear PS104 | PS110 Reference Manual - Page 174
    Installation and Reference for the Model PS104/PS105/PS110 Print Server Figure E-1 illustrates the NETGEAR Print Server IP Address Configuration window. Figure E-1. NETGEAR Print Server IP Address Configuration E-2 IP Setup
  • Netgear PS104 | PS110 Reference Manual - Page 175
    Administration Program installing, 3-1, 7-1 using advanced features, 7-1 front panel, 1-2 FTP commands supported by, 6-8 configuration example, 6-7 files supported by, 6-8 printing, 6-9, 6-14 using to configure print server, 6-7 I IBM AIX 4.15, setting up for LPD printing, 6-10 IP addresses and the
  • Netgear PS104 | PS110 Reference Manual - Page 176
    , 5-11 Binary, 5-1 Binary file servers, 5-20 Binary mode, 7-17 Directory Services (NDS), 5-1 file server, configuring, 5-2 PSERVER menu tab, 7-6 Normal/Uplink push button, 1-5, 2-2 P package contents, 2-1 power, verifying, 2-3 Printer menu bar, 7-14 printing DSI method, 6-9 FTP method, 6-9 LPD
  • Netgear PS104 | PS110 Reference Manual - Page 177
    , using for IP address assignment, 6-4 rear panel, 1-5 RPRINTER menu tab, 7-9 RPRINTER mode and NetWare 3.x Binary mode, 5-7 and NetWare 4.x NDS, 5-16 and using QUICKSET, 7-23 configuring, 5-1 S servers Netware Binary, 5-20 servicing multiple, 5-20 spooled printing LPR, with Windows NT 3.51, 4-29
  • Netgear PS104 | PS110 Reference Manual - Page 178
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
M-PS100NA-1
May 1999
NETGEAR
, Inc.
A Bay Networks Company
4401 Great America Parkway
Santa Clara, CA 95054 USA
Phone 888-NETGEAR
Installation and
Reference for the
Model PS104/PS105/
PS110 Print Server