Netgear WAC540B03 Installation Guide - Wall Mounting

Ceiling- and Wall-Mounting Guide

6.

Connect a PoE cable or power adapter to the access point before mounting.

The access point is designed to be unobtrusive, so it sits flat on the ceiling

surface when it is mounted.

7.

Hold the access point upside down and attach it to the mounting plate.

8.

Twist the access point clockwise to lock it onto the mounting plate.

NETGEAR Insight Managed

Smart Cloud Wireless Access Point (WAC540)

AC3000 802.11ac Wave 2 Tri Radio

Ceiling- and wall-mounting kit contents

Mounting plate

Mount the access point on a drop ceiling

Before mounting the access point, first set up and test the access point to verify

WiFi network connectivity.

Note:

If you are mounting the access point on a hard ceiling, use the wall-

mounting instructions on the other side of this document.

1.

Slide the T-bar partially into the metal bracket.

2.

Attach the metal bracket to the ceiling bar.

3.

Push the T-bar over the ceiling bar.

4.

Use the lock screw to lock the metal

bracket into place.

5.

Use the four short screws to attach

the mounting plate to the T-bar.

Metal bracket with

T-bar, lock screw,

and 4 short screws

3 tall screws and anchors

for wall mounting