Netgear WAX630PA Installation Guide

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

© NETGEAR, Inc., NETGEAR and the NETGEAR

Logo are trademarks of NETGEAR, Inc. Any

non‑NETGEAR trademarks are used for reference

purposes only.

July 2022

NETGEAR INTERNATIONAL LTD

Floor 1,

Building 3,

University Technology Centre

Curraheen Road, Cork,

T12EF21, Ireland

Installation Guide

Insight Managed WiFi 6 AX6000 Tri-band Multi-Gig

Access Point

Model WAX630

Model WAX630PA

Access Point Model WAX630

Package contents

NOTE:

You can power up the WAX630 by connecting it to a PoE++ switch or power

adapter. Model WAX630PA includes a power adapter, or you can purchase one separately.

Overview

1

Power/Cloud LED

2

LAN 1 LED

3

LAN 2 LED

4

2.4 GHz WLAN LED

5

5 GHz H WLAN LED

6

5 GHz L WLAN LED

7

DC power connector

8

LAN 1/PoE++ port

9

LAN 2 port

10

Reset button

1. Connect to power and Internet

Power up the WAX630 access point (AP) by connecting the LAN 1/PoE++ port to a PoE++ switch

that supplies 802.3bt power (60W PoE++ per‑port), or to a power adapter.

Make sure that the AP has Internet connectivity:

•

If you connect the AP to a switch, make sure that the switch has Internet connectivity.

•

If you use a power adapter to provide power, use an Ethernet cable to connect the

LAN 1/PoE++ port on the AP to a router or other network device on a network with Internet

connectivity.