Netgear WG602v2 WG602v2 User Manual - Page 38
How to Con WEP Wireless Security
View all Netgear WG602v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Reference Manual for the WG602 v2 54 Mbps Wireless Access Point How to Configure WEP Wireless Security Note: If you use a wireless PC to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired PC to make any further changes. To configure WEP data encryption, follow these steps: 1. Click the Security Settings link in the Setup section of the main menu and select WEP for the Security Type. Figure 3-10: WEP Settings page 2. The Authentication Type is set to Any by default. Change the Authentication Type to Shared Key to use WEP data encryption. 3. For the Encryption Strength, select 64- or 128-bit encryption. 4. You can manually or automatically program the four data encryption keys. These values must be identical on all PCs and access points in your network. 3-15 M-10181-03 Basic Installation and Configuration