Netgear WN2000RPT WN2000RPT User Manual (PDF) - Page 14

Setting Up Wep, Wpa-psk [tkip] + Wpa2-pask [aes] - manual

Get Netgear WN2000RPT - Universal WiFi Range Extender PDF manuals and user guides
UPC - 606449068887
View all Netgear WN2000RPT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Universal WiFi Range Extender WN2000RPT • WPA-PSK [TKIP]. WPA is more secure than WEP. When using wireless computers or devices that support WPA, you can enter a passphrase to join the extender's wireless network. • WPA2-PSK [AES]. WPA2 is even more secure, but some older computers do not support this standard. When using wireless computers or devices that support WPA2, you can enter the passphrase to join the extender's wireless network. • WPA-PSK [TKIP] + WPA2-PASK [AES]. When using wireless computers or devices that support either WPA or WPA2, you can enter the passphrase to join the extender's wireless network. 4. Click Apply to save your settings. 5. Use your wireless computer to connect to the extender's network with its new settings. The Smart Wizard can guide you through this process. Setting Up WEP 1. In the Wireless Settings screen, in the Security Options section, select the WEP radio button. 2. Select the authentication type: Automatic, Open System, or Shared Key. The default is Open System. Note: The authentication is separate from the data encryption. You can select authentication that requires a shared key, but still leaves data transmissions unencrypted. Security is stronger if you use both the Shared Key and WEP encryption settings. 3. Select the encryption strength setting: • WEP 64-bit encryption. Enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F). • WEP 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0-9, a-f, or A-F). 4. Enter the encryption keys. You can manually or automatically program the four data encryption keys. These values must be identical on all computers and access points in your network: • Passphrase. To use a passphrase to generate the keys, enter a passphrase, and click Generate. This automatically creates the keys. Wireless computers must use the passphrase or keys to access the range extender. Note: Not all wireless computers support passphrase key generation. If your computer does not support the passphrase, then you will need to type the encryption key in order to join the wireless network. 14 | Chapter 2. Range Extender Network Settings

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
14
|
Chapter 2.
Range Extender Network Settings
Universal WiFi Range Extender WN2000RPT
•
WPA-PSK [TKIP]
. WPA is more secure than WEP. When using wireless computers or
devices that support WPA, you can enter a passphrase to join the extender’s wireless
network.
•
WPA2-PSK [AES]
. WPA2 is even more secure, but some older computers do not
support this standard. When using wireless computers or devices that support WPA2,
you can enter the passphrase to join the extender’s wireless network.
•
WPA-PSK [TKIP] + WPA2-PASK [AES]
. When using wireless computers or devices
that support either WPA or WPA2, you can enter the passphrase to join the extender’s
wireless network.
4.
Click
Apply
to save your settings.
5.
Use your wireless computer to connect to the extender’s network with its new settings. The
Smart Wizard can guide you through this process.
Setting Up WEP
1.
In the Wireless Settings screen, in the Security Options section, select the
WEP
radio
button.
2.
Select the authentication type:
Automatic
,
Open System
, or
Shared Key
. The default is
Open System.
Note:
The authentication is separate from the data encryption. You can
select authentication that requires a shared key, but still leaves data
transmissions unencrypted. Security is stronger if you use both the
Shared Key and WEP encryption settings.
3.
Select the encryption strength setting:
•
WEP 64-bit encryption
. Enter 10 hexadecimal digits (any combination of 0–9, a–f,
or A–F).
•
WEP 128-bit encryption
. Enter 26 hexadecimal digits (any combination of 0–9, a–f,
or A–F).
4.
Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and access points in your
network:
•
Passphrase
. To use a passphrase to generate the keys, enter a passphrase, and
click
Generate
. This automatically creates the keys. Wireless computers must use
the passphrase or keys to access the range extender.
Note:
Not all wireless computers support passphrase key generation. If
your computer does not support the passphrase, then you will need
to type the encryption key in order to join the wireless network.