Netgear WNCE4004 Installation Guide

Installation Guide

Wireless HD Video and Gaming Adapter

(WNCE4004)

Installation with WPS

Step 2:

Wait until the Link LED on the

Step 3:

Push the WPS button on your router. When the

Step 1:

Connect the WNCE4004

wireless connection has been established, the

Link LED changes color to indicate the quality of the

connection—solid green, solid amber, or solid red.

See

Link LED Activity

on the reverse side of

this document for more information about what these

colors mean.

to your TV, Xbox, or Blu-ray

player with the Ethernet

cable (included) and the

power adapter.

WNCE4004 blinks green. Press

the

WPS

button on the

WNCE4004. The WPS LED

blinks blue to show that the WPS

is running.

Step 4:

Congratulations! Your installation is complete.

What is WPS?

If you have a NETGEAR router, this feature is called Push 'N' Connect. Look for the

or

symbols on the router to make sure that the

NETGEAR router supports WPS. For non-NETGEAR routers, refer to the user manual to determine if the router supports WPS.

Once you know whether your router supports WPS, choose the appropriate installation method.

WPS (Wi-Fi Protected Setup) is a simple and secured way to connect a device to an existing network.

Installation without WPS

Step 1:

On the computer you will use to install the WNCE4004, disconnect

its wireless connection to the router and/or remove any Ethernet cable

currently connected to the computer. You can restore the connection

after the WNCE4004 installation is complete.

Step 2

:

Connect the WNCE4004 to your computer, using the Ethernet

cable (included) and the power adapter.

Step 3:

Wait until the Link LED blinks green. Make sure that the computer

gets the IP address. Then, open your Internet browser—it

automatically takes you to the setup page. (If not, manually type

as the browser address.) The default

user name is

admin

and the default password is

password

.

Follow the instructions on the setup page, then return to this guide

and continue to Step 4.

Step 4:

Disconnect the Ethernet cable from your computer.

Step 5:

Connect the WNCE4004 to your TV, xBox, or Blu-ray player.

Step 6:

Congratulations! Your installation is complete.

NOTE

: Make sure that you go through the connection settings on your TV, Xbox, or Blu-ray player after the WNCE4004

is configured and connected. If asked for the type of connection, make sure that Wired is selected.

Link LED

Ethernet

ports

WPS

Power

jack

Ethernet cable

Power

adapter

WNCE4004

WPS