Netgear WNR1000 WNR1000 Setup Manual - Page 35

Supporting Software, Netgear Firmware Recovery, Utility, Power Light Stays Amber - default ip

Get Netgear WNR1000 - RangeMax 150 Wireless Router PDF manuals and user guides
UPC - 606449062588
View all Netgear WNR1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

To restore your firmware: a. Make sure your PC is connected to your router and the router is powered on. b. Insert the Resource CD that came with your router into your PC. - The CD will automatically start and detect the language you are using on your PC. Select a different language option, if you prefer. - If the CD does not automatically start, browse the CD and double-click on . c. In the CD's menu, click Supporting Software, then click Netgear Firmware Recovery Utility, and follow the prompts for the recovery process. Installation of the utility places a NETGEAR Router Recovery desktop. shortcut on the d. After firmware recovery is complete, follow the prompts to restore your configuration settings. • Power Light Stays Amber. When the router is turned on, the Power light turns amber for about 20 seconds and then turns green. If the light does not turn green, the router has a problem. If the Power light is still amber 1 minute after turning on power to the router: a. Turn the power off and back on to see if the router recovers. b. Clear the router's configuration to factory defaults. This will set the router's IP address to 192.168.1.1. This procedure is explained in "Restoring the Default Password and Configuration Settings" on page 39. If the error persists, you might have a hardware problem and should contact technical support. • Internet Light Stays Amber. When the router is turned on, the Internet light turns amber for about 20 seconds and then turns green. If the light does not turn green, the router has a problem. If the Internet light is still amber 1 minute after turning on power to the router: a. The Internet is not accessible. Confirm that you have the correct internet setting. b. Clear the router's configuration to factory defaults. This will set the router's IP address to 192.168.1.1. This procedure is explained in "Restoring the Default Password and Configuration Settings" on page 39. c. Turn the power off and back on to see if the router recovers. • Internet or LAN Port Lights Not On. If either the LAN or Internet lights do not light when the Ethernet connection is made, check the following: Troubleshooting 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Troubleshooting
31
To restore your firmware:
a.
Make sure your PC is connected to your router and the router is powered on.
b.
Insert the
Resource CD
that came with your router into your PC.
–
The CD will automatically start and detect the language you are using on your PC.
Select a different language option, if you prefer.
–
If the CD does not automatically start, browse the CD and double-click on
.
c.
In the CD’s menu, click
Supporting Software
, then click
Netgear Firmware Recovery
Utility
, and follow the prompts for the recovery process.
Installation of the utility places a NETGEAR Router Recovery
shortcut on the
desktop.
d.
After firmware recovery is complete, follow the prompts to restore your configuration
settings.
•
Power Light Stays Amber
. When the router is turned on, the Power light turns amber for
about 20 seconds and then turns green. If the light does not turn green, the router has a
problem.
If the Power light is still amber 1 minute after turning on power to the router:
a.
Turn the power off and back on to see if the router recovers.
b.
Clear the router’s configuration to factory defaults. This will set the router’s IP address to
192.168.1.1. This procedure is explained in
“Restoring the Default Password and
Configuration Settings” on page 39
.
If the error persists, you might have a hardware problem and should contact technical support.
•
Internet Light Stays Amber
. When the router is turned on, the Internet light turns amber for
about 20 seconds and then turns green. If the light does not turn green, the router has a
problem.
If the Internet light is still amber 1 minute after turning on power to the router:
a.
The Internet is not accessible. Confirm that you have the correct internet setting.
b.
Clear the router’s configuration to factory defaults. This will set the router’s IP address to
192.168.1.1. This procedure is explained in
“Restoring the Default Password and
Configuration Settings” on page 39
.
c.
Turn the power off and back on to see if the router recovers.
•
Internet or LAN Port Lights Not On.
If either the LAN or Internet lights do not light when
the Ethernet connection is made, check the following: